Spartan KH-385 User manual

KH-385 Muti-function Fitness Manual

,
v
Exploded drawing

Check list
lV
r
1( ~
x1
@~
x1
-----'--'"
x1
@~,.~
..
!il <5
~
x1
®
®T
x11
w===
"'"
~
i?
x1 x1
® . ~
x1
®~
x1
@
-es=
x1
~
QJ)
~
@
@
x1
.r:
x1
~
x1
I
\ß)
~
x2
@
dJ
x2
@
\I
x2
..
9\r---'
@
~
)
x2
@J
@ •••• I ••• ~. !>
x1
,
@
Q x1 I
®~
x2
@~
x2
@~
x1
@ '0
x6
®
=
x1
I,@
~Ix2 ; ®~
x2
,® eeceee
,
x1 I
i@
O!
I
x2!,~ ~-..,.
x2 ®, 0
x1 !
~~'-'
,
®
E1
x2 ®I~
x1
® ~I
x7
@
®
x7
@3
~
x6
@~
x1
@~
x9
®Q
x1
®~
x1
®
.o.
x1
[1)~
x1
@
.J1-
x1
!@
.o-
x1 @
I
x5
®
I)
I
x9
®~
x1
®
V
x1
@~
IX64
i@
~
x2 @
0
x2
®
!9J
Ix1
®
bJ
x1
I

114
Rm_
t! M10*25 x10
109 R~oorrrrrmJrJ
~~
112
110
103
104 ~i-~~-----'-_.
tJ M10*70 x4
100 R~~;-----;'--------l_
tJ M10*75 x4
M10*95 x1
o
0
1\
Y
54 047.5x013 x1 55 056x027 x1
M10*20 x2
105~ M8*2
1
5 x2
101 @X50
0~2T
106@ x2
024*013.5*2.5T
102 [Q x25
M10*10T
107 [Q x1
M12*12T
60 ~::~ x18
018*14.5T
53 010.5*56.5 x1
11

Part list
1Main frame 38500-3-1000- TO 1
2Rear stabilizer 38500-3-4100- TO 1
3Front vertical support 38500-3-1100- TO 1
4Upper beam 38500-3-1200- TO 1
5Front stabilizer 38500-3-1060- TO 1
6Seat support 38500-3-2300-mO 1
7Left butterfly arm 38500-3-1700-mO 1
8right butterfly arm 38500-3-1800-mO 1
9Press tube 38500-3-1600-mO 1
10 Pedal 38500-3-3100- TO 1
11 leg extension bar 38500-3-2400-mO 1
12 Upper pulley bar 327HG-3-2500- Ti 1
13 Lower pulley bar 32700-3-2600- T2 1
14 Foam roll axles 32000-6-2471-mO 2
15 Ankle strap 38500-6-2673-BO 2
16 Guiding tube 38500-3-2700-CO 2
17 weight cover 38500-6-2779-GO 2
18 Wight selector 38500-3-8100-CO 1
19 Connect plate 38800-6-1 008- TO 1
20 Single pulley support 31900-3-221 O-m1 2
21 Ankle strap 32000-6-2673-BO 2
22 Handlebar protector cover 38500-6-1783-BO 2
23 Spring knob 52716-2-0024-B1 1
24 Weight selector ball pin 320A 1-3-8300-00 1
25 Hook 31800-6-8073-NO 6
26 Chain 32700-6-8074-NO 1
27 Support plate for protector 38500-3-2784- TO 2
28 Support plate for protector 38500-3-2796- TO 2
29 Strap 38500-6-2794-BO 4
30 Chain 327 AO-6-8071-NO 1
31 Spacer bushing 58002-6-1034-00 2
32 foot cap 55476-G-5050-B9 2
33 Round plastic cap 553FO-1-0017-B8 12
34 Wrench 327C2-6-3901-01 2
35 Square plastic cap 55320-2-5050-B8 6
36 Square plastic cap 55314-2-2550-B8 2
37 Buffer 55305-5-3535-B9 1
38 Buffer 55305-5-4242-B9 1
39 Buffer 55326-4-6026-B9 2
40 Inner-hexangular wrench 58030-6-1012-DO 1
41 Cable guidance plate 327C1-6-2275-B2 7
42 Plastic ring for cable guidance 327C 1-6-2276-BO 7
43 Bushing 32200-6-1075-B3 2
44 Foam 58015-6-1160-BO 6
45 Foam 58015-6-1078-BO 8

46 Upper weight plate 32700-6-8202-80 1
47 Lower weight plate 31800-6-8201-80 9
48 Paddle back 58001-6-1210-nO 1
49 Seat 5800 1-6-1169-n 1 1
50 Cable 38500-6-8003-00 1
51 Cable 38500-6-8004-00 1
52 Cable 38500-6-8002-00 1
52A Cable 38500-6-8001-00 1
53 Pin 32700-6-8273-NO 1
54 Flat washer 551E1-1-4730-NA 1
55 Fixing sleeve 32700-6-8271-80 1
56 Raised pulley 58016-6-1003-81 5
57 Flat pulley 58016-6-1004-81 9
58 Strap 327H8-6-2672-00 1
59 Head saddle 58001-6-1179-nO 1
60 Spacer bushing 58002-6-1004-00 18
61 Screw cap 327C2-6-1075-80 62
62 Screw cap 327C2-6-1076-80 2
63 Spring pin 52524-2-0022-81 1
64 Spacer bushing 58002-6-1012-06 4
65 Fixing plate 32002-6-4602- T2 2
66 computer 38500-6-5801-80 1
67 Upper computer cable 38500-6-5872-00 1
68 Middle computer cable 38500-6-5874-00 1
69 Lower computer cable 38500-6-5873-00 1
70 Sensor cable 38500-6-5875-00 1
71 Une tuck 55312-1-0015-83 2
72 Sticky fixing nip 39000-6-5871-00 3
100 Bolt 50110-2-0075-N3 4
101 Flat washer 55110-1-2020-NA 50
102 Nylon nut 55210-1-2010-NA 25
103 Bolt 50110-2-0065-N3 14
104 Bolt 50110-2-0070-N3 4
105 Allen bolt 54008-5-0025-00 2
106 Flat washer 55112-1-2425-NA 2
107 Nylon nut 55212-1-2012-NA 1
108 Bolt 50110-2-0055-N3 1
109 Bolt 50110-2-0040-03 2
110 Bolt 50110-2-0020-NO 2
111 Bolt 50112-2-0085-N4 1
112 Bolt 50110-2-0060-N3 3
113 Bolt 50110-2-095-N5 1
114 Bolt 50110-2-0025-NO 10
115 Bolt 52605-2-0010-NO 12

r:'..__.. ++ •••••• - ••••••••••••• _ ••••• _ •••••••••• __ •••• _ •••• _._._._-~
I 1-1
; _ .. - .- _. __ _ _--._-- -_._--._ _._ -_._-----
12
!
i
i
1) (1-1) Push down the knob, the butterfly arm can adjust to the backside.
(1-2) Push down the knob, the butterfly arm can adjust to the front side.
2) The pedal can turn over toward the up side.
3) The seat can be adjusted to up-side,
4) The weight selector can adjust the quantity of the weight plate.

",
Setp 1
,::e:>
39
m
e
I
27 :
102
©
Ml0"1.S"10T x2
101
@D20"Dll"2T x8
110
P
Ml0"1.S"20L x2
FIG1
114
Ml0"1.S"25L x2
104 g
iCJ Ml0"1.S"70L x2
1) First, guiding tube (16) cross the hole of the support plate for protector (27).
Then cross the hole of the rear stabilizer (2). The guiding tube (16) and rear
stabilizer (2) is locked by flat washer (101) and bolt (114) Moreover, the
support plate for protector (27) and rear stabilizer (2) is locked by flat washer
(101) and bolt (110).
2) The main frame (1) is fixed on rear stabilizer (2) with flat washer (101) and
bolt (104). the other side is initially fixed by fixing plate (65), and then fixing
plate (65) is fixed on the rear stabilizer (2) with a flat washer (101) and a
nylon nut (102).
3) The buffer nest (39) into the guiding tube (16)

"
.. ,
Step 2
--_------ - ------ - ---------,
Ai
I
. ___
1) (A) Put lower weigbt plate (47) into guiding tube (16). Tbe weigbt selector (18)
nest into lower weigbt plate (47). And tben tbe weigbt selector (18) nest into
tbe bole of tbe lower weigbt plate (47) fixed by pin (53) and flat wasber (54)
finally, tbe upper weigbt plate (46) nest into the guiding tube (16), assemble
tbe flat washer (54)
2) Tbe weight selector ball pin can select (24) the quantity you want
3) Lock tbe front stabilizer (5) on main frame.(l), fixed by connect plate (19),
flat washer (101), bolt (103), flat washer (101) and bolt (100). The otber side is
fixed by flat washer (101) and nylon nut (102).
4) Lock tbe pedal (10) on front stabilizer (5), fixed by flat washer (101), nylon
nut (102), the other side is fixed by flat washer (101) and bolt (100).

Step 3
i-------------------------Al
48 I
1) Lock the seat. First, put seat (49) on upper beam (4). fixed by flat washer (101)
and bolt (109).
2) The seat support (6) nest into main frame (1). Then lock the front vertical
support (3) on main frame (1), fixed by flat washer (101), the opposite side
fixed by fixing plate (65), flat washer (101) and nylon nut (102).
3) Fix tbe bead saddle (59) by flat washer (101) and bolt (103).
4) Fix the paddle back by flat wasber (101) and bolt (103).

...
Step 4
.-"
102
Ml0·I.S'10T x2
'0'
O2O'O'I"2T xa
MI2'1.75·12T x'l
D24't)t3.5"2.5T x2
""0'1.5"'25L. x4
'OOi~
10
M10"1.5'15L x2
111~
10
MI2".7S'85L x1
FIG4
1) Lock the leg extension bar (11) on main frame. Fixed by flat washer (106) and
bolt (111).The other side is fixed by flat washer (106) and nylon nut (107).
2) Lock the upper beam (4) on front vertical support (3), fixed by flat washer
(101) and bolt (100). Tben fixed by nylon nut (102).
3) Lock tbe support plate for protect (28) on upper beam (4), fixed by flat
washer (101) and bolt (104).
4) The guiding tube (16) nest into upper beam (4) fixed by flat washer (101) and
(bolt (114).

Step 5
1) Lock the press tube (9) on upper beam (4), fixed by flat wasber (101) and bolt
(113).
2) Stick buffer (38) on tbe middle of press tube (9).
3) Lock left butterfly arm (7) and rigbt butterfly arm (8) on press tube (9), fixed
by allon bolt (105).

Step 6
1) The foam (44) nest on leg extension (11). The foam (44) nest on foam roll
axles (14)
2) The foam roll axles (14) crossed the seat support (6).
3) Lock the ankle on left butterfly arm and right butterfly arm (8) with spacer
bushing (31), flat washer (101) and bolt (114). Moreover, the upper side of
ankle strap (15) locks on the handlebar protector cover (22) of the right and
left butterfly arm (7) separately.

Step 7
FIG7
1) (A) The cable (50) round the flat pulley (57), and tbe flat pulley (57) is fixed
on tbe upper beam (4) witb spacer busbing (60) and nylon nut (102), spacer
busbing (60) and bolt (103).
2) (B) Lock raised pulley (56) on tbe press tube (9), fixed by flat wasber (101)
and nylon nut (102).
3) (C) The cable (50) round the flat pulley (57), tben put flat pulley (57) on the
front vertical support (3), and fixed by spacer busbing (60) and nylon nut
(103), spacer busbing (60) and bolt (103).
4) (D) Lock raised pulley (56) on the single pulley support (20), fixed by cable
guidance plate (41), plastic ring for cable guidance (42), flat wasber (101) and
nylon nut (102).
5) Cable (51) round flat pulley (57), tben put tbe ßat pulley (57) on the upper
beam (4), fixed by spacer busbing (60) and nylon nut (102), spacer busbing
(60) and bolt (103).
Besides, wben you assemble tbe cable, please see tbe 'arrow' (up) and 'arrow'
(down) for reference.

Step 8
5~~Dl
6J~ \
102__'
1) (A) First, tbe cable (52) round flat pulley (57), tben put tbe flat pulley (57) on
tbe front vertical support (3), fixed by spacer bushing (60) and nylon nut
(102), spacer busbing (60) and bolt (103).
Fix cable (52A) on tbe single pulley support (20), fixed by flat washer (101)
and bolt (114), flat wasber (101) and nylon nut (102).
2) (B) Fix tbe raised pulley (56) on tbe single pulley support (20), locked by
cable guidance plate (41), plastic ring for cable guidance (42), flat wasber
(101) and bolt (112), tbe opposite side is locked by cable guidance plate (41),
plastic ring for cable guidance (42), flat wasber (101) and nylon nut (102).
3) (C) Put tbe raised pulley (56) on tbe U-joint of tbe main frame, fixed by
cable guidance plate (41), plastic ring for cable guidance (42), flat wasber
(101) and bolt (112), tbe opposite side is locked by cable guidance plate (41),
plastic ring for cable guidance (42), flat wasber (101) and nylon nut (102).
4) (D) cable (52A) round flat pulley (57), tben put tbe flat pulley (57) on the leg
extension bar (11), fixed by spacer busbing (60) and nylon nut (102), spacer
busbing (60) and bolt (103).
6) (E) Put tbe raised pulley (56) on tbe U-joint of tbe main frame (1), fixed by
flat wasber (101) and bolt (108), flat wasber (101) and nylon nut (102).
Besides, wben you assemble tbe cable, please see tbe 'arrow' (up) and 'arrow'

Step 9
,..-----------------------------------------------------------_._-
J
FIG9
1) Stick the weight cover (17) on the support plate for protector (28).
2) 2 single ankle strap (21) hang on the hook (25). Then, the hook (25) hang on
the ball of the cable.

Step 10
61
a
x64
62
~'I
~2
FIG10
1) Screw cap (61): MI0* 64
2) Screw cap (62): M12* 2

,.
Step 11
FIG11
I) (A) the lower computer cable69) cross the backside of front vertical support (3), then
connected with the upper computer cable. The upper computer cable (67) should put into
the front vertical support (3)
2)(B) the middle computer cable (68) should fixed with sticky fixing nip (72).
3)(C) the middle computer cable (68) connected with the lower computer cable (69).
Besides, the middle computer cable (68) should fixed with sticky fixing nip (72)
4) (D) the sensor machine is connected with the lower computer cable (69)