Speco CVC5100BPVF User manual

INSTRUCTION
MANUAL
PIR Sensor Camera
CVC5100BPVF / CVC5100BPVFW
CVC5200BPVF / CVC5200BPVFW

◑
Contents...................................................... 1
◑
Precautions ................................................. 2, 3
◑
Safety Instructions ...................................... 4
◑
Package Contents....................................... 5
◑
Camera Installation ..................................... 6-8
◑ .............................................. 9, 10
◑
Camera Dimension ..................................... 11
◑
Features...................................................... 12
◑
OSD Menu Details ...................................... 13- 25
◑
Trouble Shooting......................................... 26

Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to provide
ventilation when operating under high
temperatures.
This is one of the most important parts of the
camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Severe lighting change or flicker can
cause the camera to work improperly.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
2

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DONOT REMOVE COVER(OR BACK).
NOUSER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
3





◑
◑There are no user serviceable parts inside
◑Do not disassemble this camera other than to make initial adjustments
◑Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
rical shock
◑
Please insure that your installation area can support the weight of the camera
◑Do not use a strong or abrasive detergent when cleaning the camera
◑Do not install near cooling or heating device

Package Contents
Please make sure that the following items are included in the Package:
1) CVC5100BPVF, CVC5100BPVFW, CVC5200BPVF, CVC5200BPVFW
• 1 Video Test Connector, Power Jack
• 1 3Axis Bracket Round Base Adaptor
• 2 Wrenches
• Set Screw
- 4 Tapping Screws 4x25
- 4 Hexagon Socket Screws M5x10

CAMERA INSTALLATION
Compatibility
1) CVC5100BPVF, CVC5100BPVFW, CVC5200BPVF, CVC5200BPVFW
CVCJBB INTJBS INTCM

CAMERA INSTALLATION
1. CVC5100BPVF, CVC5100BPVFW, CVC5200BPVF, CVC5200BPVFW
CAMER
WALL
A ASSEMBLY
HEXAGON SOCKET SCREW M5X10, 4EA
TAPPING SCREW 4X25, 4EA
3AXIS BRACKET ROUND BASE ADAPTOR
8

SPECIFICATIONS
PIR Sensor Weatherproof Bullet Camera
DC Auto Iris Varifocal Lens(2.8mm-12mm)
MODEL CVC5100BPVF / CVC5100BPVFW
CVC5100BPVF
CVC5100BPVFW
600TV Lines
DC Auto Iris Varifocal
Lens(2.8mm-12mm)
True Day / Night Capability
ICR-IR Cut Filter Removable
White LEDs * 6pcs
IR LEDs * 24pcs
■
■
1/3” Sony Super HAD ll CCD
NTSC, PAL
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)
2:1 Interlace
Internal
600TV Lines
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux
More than 52dB
CVBS: 1.0Vp-p / 75Ω
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)
Available
On / Off (Level adjustable)
BLC / HLC / OFF
Color / BW / AUTO
Low / High / Off
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
Auto / Off (Selectable x2 ~ x512)
On / Off (8 Programmable Zones)
On / Off (12 Programmable Zones)
On / Off (Level adjustable)
On / Off (x1 ~ x16)
On / Off
On / Off (Level adjustable)
On / Off
DC 12V / AC24V(Dual Voltage)
DC 12V 250mA(CDS OFF,PIR OFF) / 600mA(CDS ON,PIR ON)
Heater ON Adj:200~600mA
AC 24V 100mA(CDS OFF,PIR OFF),250mA(CDSON,PIR ON)
Heater ON Adj:120~250mA
DC Auto Iris Varifocal Lens(2.8mm-12mm)
65 ft
-4˚F ~ +140˚F.RH 95% Max.
-4˚F ~ +140˚F.RH 95% Max.
3.70”(W) * 3.93”(H) * 11.22”(D)
3.52 lbs
Image Pick-Up Device
TV System
Total Pixels
Effective Pixels
Scanning Frequency
Scanning System
Synchronization
Resolution
Minimum Illumination
S/N Ratio
Video Output
Electronic Shutter Speed
OSD
SSDR
BLC
Day & Night
Gain Control
White Balance
SENS-UP
Motion Detection
Privacy Masking
SSNR III (Digital Noise Reduction)
Digital Zoom
DIS (Digital Image Stabilizadion)
Sharpness
Filp / Mirror
Power Supply
Power Consumption
Lens
IR Distance
Operational Temp.
Storage Temp.
Dimension
Weight
9

PIR Sensor Weatherproof Bullet Camera
DC Auto Iris Varifocal Lens (5mm-50mm)
CVC5200BPVF
CVC5200BPVFW
600TV Lines
DC Auto Iris Varifocal
Lens(5mm-50mm)
True Day / Night Capability
ICR-IR Cut Filter Removable
White LEDs * 6pcs
IR LEDs * 24pcs
■
■
SPECIFICATIONS
MODEL CVC5200BPVF / CVC5200BPVFW
1/3” Sony Super HAD ll CCD
NTSC, PAL
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V)
2:1 Interlace
Internal
600TV Lines
CDS OFF: 0.15 Lux, CDS ON: 0.00002 Lux
More than 52dB
CVBS: 1.0Vp-p / 75Ω
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)
Available
On / Off (Level adjustable)
BLC / HLC / OFF
Color / BW / AUTO
Low / High / Off
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
Auto / Off (Selectable x2 ~ x512)
On / Off (8 Programmable Zones)
On / Off (12 Programmable Zones)
On / Off (Level adjustable)
On / Off (x1 ~ x16)
On / Off
On / Off (Level adjustable)
On / Off
DC 12V / AC24V(Dual Voltage)
DC 12V 250mA(CDS OFF,PIR OFF) / 600mA(CDS ON,PIR ON)
Heater ON Adj:200~600mA
AC 24V 100mA(CDS OFF,PIR OFF),250mA(CDSON,PIR ON)
Heater ON Adj:120~250mA
DC Auto Iris Varifocal Lens(5mm-50mm)
65 ft
-4˚F ~ +140˚F. RH 95% Max.
-4˚F ~ +140˚F. RH 95% Max.
3.70”(W) * 3.93”(H) * 11.22”(D)
3.52 lbs
Image Pick-Up Device
TV System
Total Pixels
Effective Pixels
Scanning Frequency
Scanning System
Synchronization
Resolution
Minimum Illumination
S/N Ratio
Video Output
Electronic Shutter Speed
OSD
SSDR
BLC
Day & Night
Gain Control
White Balance
SENS-UP
Motion Detection
Privacy Masking
SSNR III (Digital Noise Reduction)
Digital Zoom
DIS (Digital Image Stabilizadion)
Sharpness
Filp / Mirror
Power Supply
Power Consumption
Lens
IR Distance
Operational Temp.
Storage Temp.
Dimension
Weight
10

CAMERA INSTALLATION
1) CVC5100BPVF, CVC5100BPVFW, CVC5200BPVF, CVC5200BPVFW
3.70”
3.93”
3.54”
3.93” dia
11.22”
5.90”
5.19”
10.55”
11

- The built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W, IR-LED ON)or lower
illumination.
- By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD, the camera
produces clear picture quality with a horizontal resolution of 600 TV lines for color and a horizontal
resolution of 700TV lines for BW mode.
- The high-performance W-V DSP chip effectively removes low-light gain noise and ghosting to provide
clear images even in dark environments.
- This camera has a function that automatically selects the mode that is appropriate for daytime or night-time
conditions.
The COLOR mode operates in daytime conditions to provide optimum colors, and BW mode operates in
night-time conditions to enhance the definition of the image.
- For images with high contrast between bright and dark Areas from difficult lighting conditions such as
backlighting, this camera selectively illuminates darker Areas while retaining the same light level for
brighter Areas to even out the overall brightness.
◑
- HLC(High Light Compensation), SENS-UP, FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY
functions are provided.
- Up-most and advanced DNR technology camera picture quality has a disk saving effects due to Image sizes
are smaller than standard CCTV camera image.
- The camera can be controlled by selecting the menu text displayed on the monitor screen.
- Built-In PIR sensor turns the white LED ON when the PIR is triggered by motion.
12



1. Type A, Type B, Type C of OSD button could be used when it needs to
OSD control.
2. Type D is extra Option (wired Remote controller)
▲Up button: Moves the cursor upwards. Use this button to select an item
or adjust the parameters.
▼Down button: Moves the cursor downwards. Use this button to select an
item or adjust the parameters.
◀Left button: Moves the cursor to the left. Use this button to select or
adjust the parameters of the selected item. The parameter changes
each time this button is pressed.
▶Right button: Moves the cursor to the right. Use this button to select or
adjust the parameters of the selected item. The parameter changes each
time this button is pressed.
◎Set button: Executes selections and displays a submenu for an item with
the mark.


●

●















MAIN SETUP
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSNR
5.BACKLIGHT
6.DNR3
7.DAY/NIGHT
8.SPECIAL
9.EXIT
1.LENS
2.EXPOSURE
3.WHITE BAL
DC
ATW
OFF
OFF
ON
AUTO
SAVE
DC
ATW
☞NOTE
■ An item with the
◀
icon also has sub menus. To select a sub menu, select an item
with the icon and press the Function Setup switch.
■ An item with the - - - icon is unavailable due to function settings.


 


☞NOTE
■ If color rolling occurs when using a DC lens, set Shutter to Fixed (---).
☞NOTE
■ When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
●




◆








MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
DC
ATW
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
25
- - -
HIGH
OFF


◆ 




◆ 



◆ 

☞NOTE
■ If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
■ Note that the higher the zoom level, the brighter the screen, but the more likely there
will be a ghosting effect.
■ It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when
the D-ZOOM level is increased.
●





MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
DC
ATW


※
◆
˚˚
◆ ˚˚ 

◆ ˚˚
◆ 


◆ →


☞NOTE
■ White Balance may not work properly under the following conditions. In this case
select the AWC mode.
①When the color temperature of the environment surrounding the subject is out of the
control range (e.g. clear sky or sunset).
②When the ambient illumination of the subject is dim.
③
illumination changes dramatically, the White Balance operation may become unstable.
●




MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSNR
DC
ATW
OFF






●







◆ 

◆ 


 
 
 

 
◆ 
 
◆ 

◆ 

MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSNR
5.BACKLIGHT
6.DNR3
7.DAY/NIGHT
8.SPECIAL
9.EXIT
DC
ATW
OFF
OFF
ON
AUTO
SAVE


BLC SETUP HLC SETUP
Press Set to Return
Press Set to Return
LEVEL
TOP
BOTTOM
LEFT
RIGHT
LEVEL
LIMITS
MASK COLOR
MASK TONE
TOP
BOTTOM
LEFT
RIGHT
LOW
38
109
54
121
MIDDLE
NIGHT ONLY
BLACK
1
5
120
5
172
☞NOTE
■ Because there can be a difference in the effectiveness of HLC according to the amount
of light area in the screen, optimize the installation angle for the best HLC performance.
■
NIGHT ONLY mode.
■ The HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
■ BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
●





◆ 
◆ 
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSNR
5.BACKLIGHT
6.DNR3
7.DAY/NIGHT
8.SPECIAL
9.EXIT
DC
ATW
OFF
OFF
ON
AUTO
SAVE