Speco VL5700BPVF User manual

INSTRUCTION
MANUAL
White LED Camera
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 6/9/10
VL5700BPVF
VL5700BPVFW

- 2 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
☞Do NOT expose this appliance to rain or moisture.

- 3 -
Contents
Contents 3
4
5
32
Sefety Instructions
Precautions
Trouble Shooting
Menu Set Up
▶OSD Control Button
▶Set Up Menu
▶Menu Set Up
▶Lens
▶Exposure
▶Back Light
▶White Bal.
▶Day & Night
▶3DNR
▶Special
▶Adjust
▶Reset
▶Exit
◈Camera Title
◈D - Effect
◈Motion
◈Privacy
◈Defect
7
30
8
31
11
31
12
13
15
18
19
21
22
22
25
27
28
29

- 4 -
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to provide
ventilation when operating under high
temperatures.
This is one of the most important parts of the
camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Severe lighting change or flicker can
cause the camera to work improperly.
NOTE
* If the camera is exposed to
spotlight or object reflecting strong light, smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.

- 5 -
Sefety Instructions
Precautions for use
Please handle this camera carefully :
◑ This camera should be installed by qualied personnel only
◑ There are no user serviceable parts inside
◑Do not disassemble this camera other than to make initial adjustments
◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
◑ Do not use a strong or abrasive detergent when cleaning the camera
◑ Do not install near cooling or heating device

VL5700BPVF
VL5700BPVFW
600TV Lines
DC Auto Iris Varifocal Lens
(4mm-9mm)
True Day/Night Capability
ICR-IR Cut Filter Removable
850nm IR LEDs * 14pcs
White LED * 2pcs
■
■
CDS
White LED
IR LED's 14EA & White LED's 2EA
& Heater 1EA
SPECIFICATIONS
White LED Camera
DC Auto Iris Varifocal Lens(4mm-9mm) / IR LED Built-in 14pcs + White LED 2pcs
1/3" SONY Super HAD ll CCD
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
2:1 Interlace
Internal / Line Lock(Option)
Available
OFF / HSBLC / BLC Selectable
600TV Lines
52dB (AGC Off, Weight On)
0.000006 Lux(IR LED ON)
ATW / AWB / Manual / AWC→SET
AUTO (1/50sec, 1/60sec ~ 1/100,000sec)
Off / Auto(Selectable limit *2 ~ *256)
High, Middle, Low, Off Selectable
Off/On (1~50 Level Adjustable)
Indoor / Outdoor / Off
On/Off (4 Zone)
On/Off (8 Zone)
Off / Mirror / V-Rev / Rotate
On/Off
0~31’(Level Adjustable)
Color /BW/ Auto/ EXT
On(*32) / Off
Auto:128 Point
1EA
DC 12V / AC24V(Dual Voltage)
DC 12V 220mA(CDS OFF,Heater ON) / 400mA(CDS OFF,Heater ON)
AC 24V 100mA(CDS OFF,Heater ON) / 150mA(CDS OFF,Heater ON)
DC Auto Iris Varifocal Lens(4mm-9mm)
15m
14~122ºF RH 95% Max.
-4~140ºF RH 95% Max.
2.75"(W) * 3.54"(H) * 7.4"(D)
1.1 lbs
Sensor
Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D
Backlight
Resolution
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter Speed
Sense-Up
Gain Control
3 DNR
D-WDR
Motion Detection
Privacy
Mirror
Freeze
Sharpness
D&N Selection
Digital Zoom
Blemish Compensation
Heater
Power
Power Consumption
Lens
IR Distance
Operating Temperature/Humidity
Storage Temperature/Humidity
Dimension
Weight
MODEL VL5700BPVF / VL5700BPVFW

- 7 -
OSD Control Button
1. Type A, Type B, Type C of OSD button could be used when it needs to
OSD control.
2. Type D is extra Option (wired Remote controller)

- 8 -
●
Setup Menu
How to Set Up the camera menu
΄Ͷ΅Ά΁;ͶͿΆ ͵ͶͷͲΆͽ΅΄Ͷ΅
΃Ͷ΅
ͶͿ͵
;ͲͿΆͲͽ
΄͹Ά΅΅Ͷ΃
΀ͷͷ
ͽ΀Έ
;ͺ͵͵ͽͶ
͹ͺ͸͹
΀ͷͷ
΃Ͷ΅
ͶͿ͵
΀ͷͷ
ͽ΀Έ
;ͺ͵͵ͽͶ
͹ͺ͸͹
΁΀΄ͺ΅ͺ΀Ϳ
΄ͺ΋Ͷ
Ͳ͸ͲͺͿ
͵ͶͷͲΆͽ΅
΃Ͷ΅
ͶͿ͵
ͽͶ·Ͷͽ ί΄ΖΝΖΔΥΒΓΝΖ
Ͳͽͽ͵ͲΊ
Ϳͺ͸͹΅΀ͿͽΊ
΁΀΄ͺ΅ͺ΀Ϳ
΄ͺ΋Ͷ
Ͳ͸ͲͺͿ
͵ͶͷͲΆͽ΅
΃Ͷ΅
ͶͿ͵
͹ͺ͸͹ͽͶ·ͶͽίͲΕΛΦΤΥΒΓΝΖ
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
ͶͿ͵
΀ͷͷ
΃Ͷ΅
ͶͿ͵
Ͳ΅Έ
ͲΈͳ
ͲΈʹ΄Ͷ΅
΃Ͷ΅
ͶͿ͵
ͺͿ͵΀΀΃
΀Ά΅͵΀΀΃
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
ͲΆ΅΀ͷͽͼ
ΩΩΩΩΩΩΩΩ
΄ͶͿ΄ͶΆ΁ΩίΩͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ͽ΀ΈͽͶ·ͶͽίͲΕΛΦΤΥΒΓΝΖ
ͽ΀ΈͽͶ·ͶͽίͲΕΛΦΤΥΒΓΝΖ
ͲΆ΅΀
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
Ͳ΃ͶͲ
Ͳ΃ͶͲ
͸ͲͺͿ
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
;ͲͿΆͲͽ
ͳ΃ͺ͸͹΅ͿͶ΄΄ίͲΕΛΦΤΥΒΓΝΖ
Έ͹ͺ΅ͶͳͲͽ
ͳͽʹ
͹΄ͳͽʹ
ͺͿ͵΀΀΃
΀Ά΅͵΀΀΃
΃Ͷ΅Ά΃Ϳ
;΀͵Ͷ
ͽͶͿ΄
ͶΉ΁΀΄Ά΃Ͷ
Ͳ͸ʹ
΄ͶͿ΄ͶΆ΁
͵Έ͵΃
ͳͽʹ
͵ʹ
;ͶͿΆ
͹ͺ͸͹ͽͶ·ͶͽίͲΕΛΦΤΥΒΓΝΖ
ͳͽΆͶίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΃Ͷ͵ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ

- 9 -
΃Ͷ΅
ͶͿ͵
ͶΉ΅
ͳΆ΃΄΅΀Ϳ΀ͷͷ
͸ͲͺͿ
΀ͷͷ
΃Ͷ΅
ͶͿ͵
΀ͷͷ
ʹͲ;΅ͺ΅ͽͶ΀Ϳ΀ͷͷ
ͷ΃ͶͶ΋Ͷ΀Ϳ΀ͷͷ
;ͺ΃΃΀΃
·ͷͽͺ΁
΃΀΅Ͳ΅Ͷ
΀ͷͷ
͵΋΀΀;ΩίΩ
΁ͲͿί
΅ͺͽ΅ί
΃Ͷ΅Ά΃Ϳ΃Ͷ΅ͶͿ͵
ͿͶ͸ͺ;Ͳ͸Ͷ ΀Ϳ΀ͷͷ
΃Ͷ΅
ͶͿ͵
ʹͲ;ͺ͵
ͺ͵͵ͺ΄΁ͽͲΊ ΀Ϳ΀ͷͷ
ͳͲΆ͵΃Ͳ΅Ͷ
΃Ͷ΅Ά΃Ϳ ΃Ͷ΅
ͶͿ͵
΁΀΄ͺ΅ͺ΀Ϳ
΄ͺ΋Ͷ
Ͳ͸ͲͺͿ
;΀΅ͺ΀Ϳ·ͺͶΈ ΀Ϳ΀ͷͷ
΃Ͷ΅Ά΃Ϳ ΃Ͷ΅
ͶͿ͵
΀ͷͷ
Ͳ΃ͶͲ΄ͶͽͶʹ΅
Ͳ΃ͶͲ͵ͺ΄΁ͽͲΊ ΁΀΄ͺ΅ͺ΀Ϳ
΄ͺ΋Ͷ
Ͳ͸ͲͺͿ
ʹ΀ͽ΀΃
΃Ͷ΅Ά΃Ϳ ΃Ͷ΅
ͶͿ͵
΀ͷͷ
ͺͿ΅
ͽͽ
΀Ϳ
;ͺ΃΃΀΃
͵΋΀΀; ΀Ϳ
΀Ϳ
΀Ϳ Ͳ΃ͶͲ
΃Ͷ΅Ά΃Ϳ΃Ͷ΅ͶͿ͵
΃Ͷ΅Ά΃Ϳ
ͽͶ·Ͷͽ΃ͲͿ͸ͶίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ͲΆ΅΀
΃Ͷ΅Ά΃Ϳ
ͳΈ ͺ΃΄;Ͳ΃΅
΄΁ͶʹͺͲͽ
΀Ϳ
͵ͲΊͿͺ͸͹΅
͵Ϳ΃
;΀΅ͺ΀Ϳ
΁΃ͺ·ͲʹΊ
΄ΊͿʹ
΀΁΅ͺ΀Ϳ
΃Ͷ΅Ά΃Ϳ
Ͳ΃ͶͲ΄ͶͽͶʹ΅Ͳ΃ͶͲίͲ΃ͶͲ
Ͳ΃ͶͲ͵ͺ΄΁ͽͲΊ
΄ͶͿ΄ͺ΅ͺ·ͺ΅Ίί
΃΄
΀΁΅ͺ΀Ϳ
͵ͶͷͷͶʹ΅
͵ͿͲ͸ʹίͲΕΛΦΤΥΒΓΝΖ
Ϳ͵Ͳ͸ʹίͲΕΛΦΤΥΒΓΝΖ
ʹ΀ͽ΀΃
͵ͶͽͲΊίͲΕΛΦΤΥΒΓΝΖ

- 10 -
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
ͶͿ͵
΄͹Ͳ΃΁ͿͶ΄΄
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
ͶͿ͵
ͷͲʹ΅΀΃Ί ΃Ͷ΄Ͷ΅
΃Ͷ΅
ͶͿ͵
ͶΉͺ΅
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
;΀Ϳͺ΅΀΃
΃Ͷ΅Ά΃Ϳ
ʹ΃΅
ͽʹ͵
΃Ͷ΅Ά΃Ϳ
Ͳ͵ͻΆ΄΅
΃Ͷ΄Ͷ΅
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
ͽͶ·Ͷͽί
ͳͽΆͶ͸ͲͺͿί
΃Ͷ͵͸ͲͺͿί
ίͽΖΧΖΝͲΕΛΦΤΥΒΓΝΖ
ͽͶ·Ͷͽί
ͳͽΆͶ͸ͲͺͿί
΃Ͷ͵͸ͲͺͿί
͸Ͳ;;ͲΆ΄Ͷ΃ί
ͽͶ·Ͷͽί
Ά΄Ͷ΃
ͳͽΆͶ͸ͲͺͿί
΃Ͷ͵͸ͲͺͿί
͸Ͳ;;ͲΆ΄Ͷ΃ί
΄΅Ͳ΃΅
͵ͶͷͶʹ΅
΄ͶͿ΄ͶΆ΁ΩίΩ
͵ͺͷͷͶ΃ͶͿʹͶί

- 11 -
Menu items can be selected by using the OSD buttons of the camera
1. Press the Set Up button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the arrow indicator Up or Down to select the desired feature by pressing
the Up or Down button.
Menu Set Up
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR
ON
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR
ON

- 12 -
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left or Right button.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol is display "- - - -"
Lens
DC:DC Auto Iris Lens
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR
ON

- 13 -
3. Press the RETURN to return to the SETUP menu.
NOTE
* When DC is selected, the brightness can be adjusted. The brightness control
range is 1 ~ 100.
Lens
BRIGHTNESS
RETURN
100
This function is used to select Automatic or Manual shutter speed control.
1. On the Set Up menu screen select EXPOSURE by using the Up or Down button.
2. Select the desired shutter mode by pressing the Left or Right button.
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.
Exposure
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR
ON

- 14 -
EXPOSURE
SENS-UP
SHUTTER
AGC
SENS-UP
BLC
D-WDR
RETURN
SENS-UP
RETURN
AUTO
MIDDLE
AUTO
OFF
OFF
RET
x 4
NOTE
*Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed
from 1/60, FLK, 1/250~1/100,000.
→FLK: Select FLK mode if flickering occurs; caused by the unmatched frequency of electric
light. If select FLK mode, sense-up does not operate.
* AGC(AUTO GAIN CONTROL):
A higher gain increases brightness but also increases any noise.
OFF : Deactivates the AGC function
LOW : Sets automatic gain control to LOW.
MIDDLE : Sets automatic gain control to MIDDLE.
HIGH : Sets automatic gain control to HIGH
* SENS - UP:
At night and/or in dark conditions, the Sens-Up mode can be selected to desired value from x2 ~ x256.

- 15 -
* OFF: BLC function does not operate.
* BLC: Select LOW/MID/HIGH
User can select and define a specific area in scene and view the area clearly.
Press the "ENTER" button at the AREA menu, you can change the area like a picture 1.
Press the "ENTER" button again after area setting, you can change the area like a picture 2.
Default: Press the Default to return to factory defaults.
* RETURN:
Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.
NOTE
* Pressing the SET button in AUTO mode allows adjustment of image brightness
by increasing or decreasing the shutter speed (x2 ~x256).
* The higher the level, the brighter the image becomes, but it is possible that an
after image (ghosting) could appear.
* When SENS-UP is activated the increased magnification can induce noise and
pixelation; this is quite normal.
Back Light(BLC)
This camera witch is using 3D-DNR DSP provides intelligent light level control to overcome
even strong backlight conditions.
BLC
GAIN
AREA
DEFAULT
RETURN
MIDDLE
RET

- 16 -
* HSBLE: HSBLC function is especially effective for reading car number plates at the night time.
You can select and define the required observation area for the target object and ignore a strong light area.
Press the "ENTER" button at the AREA menu, you can change the position as shown in Picture 1.
Press the "ENTER" button again after area setting, you can change the position as shown in Picture 2.
Default: Press the Default to return to factory defaults.
PICTURE 1
PICTURE 1
PICTURE 2
PICTURE 2
POSITION
POSITION
SIZE
SIZE
HSBLC
LEVEL
MODE
AREA
DEFAULT
RETURN
5
ALL DAY
RET

- 17 -
* D-WDR: This camera which is using 3D-DNR DSP provides intelligent light level control to overcome even
strong backlight conditions.
→OFF: D-WDR function does not operate.
When there are simultaneous bright & dark image area WDR makes them both distinct and can be selected
as OUTDOOR and INDOOR.
* RETURN: Select Return to save the changes in the EXPOSURE menu and return to the SETUP menu.
HSBLC OFF
D-WDR OFF
HSBLC ON
D-WDR ON
D-WDR
LOW-LEVEL
HIGH-LEVEL
RETURN
5
5
RET

- 18 -
White Balance
The White Balance function is used to control the “on-screen” colors.
1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the Left or Right button.
* There are three user selectable White Balance settings available.
* ATW : (Auto Tracking White Balance)
Normal setting; when the color temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors)
* AWB : The White Balance is automatically adjusted in a specific environment.
* AWC → SET : To obtain the best results press the SET button while the camera is focused onto white
paper. If the environment, and/or light source changes, the White Balance will require re-adjustment.
* MANUAL : Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC then
change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red) and
B-Gain(Blue) while monitoring the color of the image.
WHITE BAL MANUAL
BLUE
RED
RETURN
40
21
RET
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR
ON

- 19 -
Day / Night
Picture can be displayed in either colour of black and white.
1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen.
2. Select the desired mode using the Left and Right buttons.
* COLOR : The picture is always displayed in color.
* BW : This picture is always displayed in black and white.
Select BW using the button and press the menu to activate COLOR BURST option.
IR SMART : It controls the IR LED(bright portion base), satuation is not expected.
B/WDAY NIGHT
BURST
IR SMART
RETURN
ON
ON
RET
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
AUTO
ON

- 20 -
AREA
SMART IR ONSMART IR OFF
SIZE
IR SMART
GAIN
AREA
RETURN
10
RET
→ AUTO: The mode will automatically switches to COLOR in normal condition and switches to BW mode
when ambient illumination is low.
Press the SET button to set the switching time or D→N(AGC), N→D(AGC) in AUTO mode.
DAY & NIGHT AUTO
DELAY
D→N(AGC)
N→D(AGC)
RETURN
5
170
70
RET