Speco HT7246H User manual

INSTRUCTION
MANUAL

4QFDP5FDIOPMPHJFTJTDPOTUBOUMZEFWFMPQJOHQSPEVDUJNQSPWFNFOUT
8FSFTFSWFUIFSJHIUUPNPEJGZQSPEVDUEFTJHOBOETQFDJGJDBUJPOTXJUIPVUOPUJDFBOEXJUIPVUJODVSSJOHBOZPCMJHBUJPO 3FW
HT7246H / HT7247H / HT7250H / HT7248FFiH
(Dome Camera with Chameleon™ Cover)
HTINTB8H / HTINTB8HW / HTINTB9H / HTINTB9HW
/ HTINTB10H / HTINTB10HW / HTB11FFiH
(Bullet Camera with mount plate)
HTINTD8H / HTINTD8HW
(Turret Camera)

Contents
- 1 -
Ł

Contents...................................................... 1
Ł

Precautions ................................................. 2, 3
Ł

Safety Instructions ...................................... 4
Ł

Package Contents....................................... 5
Ł

Camera Installation ..................................... 6-11
Ł

.............................................. 12-14
Ł

Camera Dimension ..................................... 15, 16
Ł

Features...................................................... 17
Ł

OSD Menu Details ...................................... 18- 32
Ł

Trouble Shooting......................................... 33

- 2 -
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-4°F and +140°F. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.

- 3 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
ōDo NOT use power sources other than those specified.
In USA and Canada, Use Class 2 Power Supply Only

- 4 -
Safety Instructions
1SFDBVUJPOTGPSVTF
1MFBTFIBOEMFUIJTDBNFSBDBSFGVMMZ
Ł
ŁThere are no user serviceable parts inside
ŁDo not disassemble this camera other than to make initial adjustments
ŁUse a UL approved regulated 24 volt AC or 12 volt DC power supply
Ł

Ł
Please insure that your installation area can support the weight of the camera
ŁDo not use a strong or abrasive detergent when cleaning the camera
ŁDo not install near cooling or heating device

- 5 -
Package Contents
Please make sure that the following items are included in the Package:
1) HT7246H, HT7247H, HT7250H, HT7248FFiH




- 3 Tapping Screws 4x40
- 3 Plastic Anchor
2) HTINTB8H, HTINTB8HW, HTINTB9H, HTINTB9HW, HTINTB10H,
HTINTB10HW, HTB11FFiH




- 4 Tapping Screws 4x25
- 4 Hexagon Socket Screws 5x10
3) HTINTD8H, HTINTD8HW



- 3 Tapping Screws 4x25
- 2 Hexagon Socket Screws M6x20

- 6 -
CAMERA INSTALLATION
jvuulj{Gwv~lyGjhislG
XUG~oluG|zpunGXYG}vs{zGkjGOGG\WWGhPG
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}GhP
ZUGjvuulj{G}pklvGjhislG
T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG
[UGjvuulj{GhGGOyGP
T jGORGSGjvtPGGwGGGOTUGjvtPGG
uGGGlGhGkGGtG
kGG˄vu˅GGGU
kjGXY}GwGz
wGpGaylk
j GaGORP
ishjraOTP
ylkORP
wGz
hjGY[}
R
T
jvtG
hGvG
wGhGkG
uGhGk

- 7 -
CAMERA INSTALLATION
Compatibility
1) HT7246H, HT7247H, HT7250H, HT7248FFiH
2) HTINTB8H, HTINTB8HW, HTINTB9H, HTINTB9HW, HTINTB10H,
HTINTB10HW, HTB11FFiH
INTWM
CVCJBB
INTPM
INTJBS
CVCJBD
INTCM
DFM

- 8 -
CAMERA INSTALLATION
Compatibility
3) HTINTD8H, HTINTD8HW
INTWM INTPM JB03TG

CAMERA INSTALLATION
- 9 -
1. HT7246H, HT7247H, HT7250H, HT7248FFiH
CAUTION : The installation instructions in this manual are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any servicing other
than that contained in the operating instructions unless you are qualified to do so.
VANDAL DOME BODY ASSEMBLY
BODY OUTER COVER
TAPPING SCREW 4X40, 3EA
VANDAL DOME BASE ASSEMBLY
PLASTIC ANCHOR 6x30, 3EA

CAMERA INSTALLATION
- 10 -
2. HTINTB8H, HTINTB8HW, HTINTB9H, HTINTB9HW, HTINTB10H,
HTINTB10HW, HTB11FFiH
CAMERA ASSEMBLY
HEXAGON SOCKET SCREW M5X10, 4EA
TAPPING SCREW 4X25, 4EA
BASE ADAPTOR BRACKET

CAMERA INSTALLATION
- 11 -
3. HTINTD8H, HTINTD8HW
DOME BASE
HEXAGON SOCKET SCREW M6X20, 2EA
DOME ASSEMBLY
DOME BODY
TAPPING SCREW 4X25, 3EA

- 12 -
SPECIFICATIONS
Intensifier H
(Dome Camera with Chameleon™ Cover)





02'(/ HT7246H/HT7247H/HT7250H/HT7248FFiH
1/3 Inch 960H Exview HAD CCD II
NTSC



2:1 Interlace
Internal


More than 52dB
:

Available


Color / BW / AUTO / EXT

 

On / Off (4 Programmable Zones)
On / Off (8 Programmable Zones)


On / Off







5.10"(Dia) * 3.46"(H)
1 lbs
Sensor type

Total pixels
Effective pixels
Scanning frequency
Scanning system
Synchronization
Resolution
Min. illumination
S/N Ratio

Electronic Shutter Speed
OSD
WDR

Day & Night
Gain Control
White Balance
Intensify
Motion Detection
Privacy Masking
SPECO DNR
Digital Zoom
DIS (Digital Image Stabilization)
Sharpness
Flip / Mirror
Power Supply
Power Consumption

Operational Temp.
Storage Temp.
Dimension
Weigh





- 13 -
Intensifier H
(Bullet Camera with mount plate)





SPECIFICATIONS
02'(/ HTINTB8H(W)/HTINTB9H(W)/HTINTB10H(W)/HTB11FFiH
1/3 Inch 960H Exview HAD CCD II
NTSC



2:1 Interlace
Internal


More than 52dB
:

Available


Color / BW / AUTO / EXT

 

On / Off (4 Programmable Zones)
On / Off (8 Programmable Zones)


On / Off







3.46"(W) * 4.01"(H) * 11.02"(D)
3 lbs
Sensor type

Total pixels
Effective pixels
Scanning frequency
Scanning system
Synchronization
Resolution
Min. illumination
S/N Ratio

Electronic Shutter Speed
OSD
WDR

Day & Night
Gain Control
White Balance
Intensify
Motion Detection
Privacy Masking
SPECO DNR
Digital Zoom
DIS (Digital Image Stabilization)
Sharpness
Flip / Mirror
Power Supply
Power Consumption

Operational Temp.
Storage Temp.
Dimension
Weigh





- 14 -
Intensifier H
(Dome Camera)

HTINTD8H
HTINTD8HW


SPECIFICATIONS
02'(/ HTINTD8H / HTINTD8HW
1/3 Inch 960H Exview HAD CCD II
NTSC



2:1 Interlace
Internal


More than 52dB
:

Available


Color / BW / AUTO / EXT

 

On / Off (4 Programmable Zones)
On / Off (8 Programmable Zones)


On / Off







5.47"(Dia) * 4.36"(H)
3.08 lbs
Sensor type

Total pixels
Effective pixels
Scanning frequency
Scanning system
Synchronization
Resolution
Min. illumination
S/N Ratio

Electronic Shutter Speed
OSD
WDR

Day & Night
Gain Control
White Balance
Intensify
Motion Detection
Privacy Masking
SPECO DNR
Digital Zoom
DIS (Digital Image Stabilization)
Sharpness
Flip / Mirror
Power Supply
Power Consumption

Operational Temp.
Storage Temp.
Dimension
Weigh

- 15 -
CAMERA DIMENSION
1) HT7246H, HT7247H, HT7250H, HT7248FFiH
2) HTINTB8H, HTINTB8HW, HTINTB9H, HTINTB9HW, HTINTB10H,
HTINTB10HW, HTB11FFiH
1.16”
5.10” dia
5.10” dia
3.93” dia
3.46”
3.46”
4.01”
3.11”
3.89” dia
11.02”
5.90”
5.03”
10.51”

- 16 -
CAMERA DIMENSION
3) HTINTD8H, HTINTD8HW
5.47” dia
4.36”
3.34”
3.70”

- 17 -
FEATURES
Now with “PRESETS”
PRESETS (Outdoor, Indoor, Elevator, Lobby, Hallway & Low Light)
Used for a quick and easy setup for the installation environment.
700TVL Resolution
Horizontal resolution of 700 TV lines is achieved by using a
SONY Super-HAD CCD with 520,000 pixels, and a custom DSP
yielding pictures with a high S/N ratio.
INTENSIFIER H
More Powerful Performance in low light condition.
High quality Pictures to be captured in very low light condition.
WDR
More Powerful WDR in strong back lighting.
Your camera allows you to get a clear image.
SPECO DNR

!"
HLC (High Light Compensation)
This function reverses bright spots in the picture (such as
headlights). This enables the entire system to do a better job of
resolving and displaying grayscale information such as a
license plate.

- 18 -
2. Move and select the required function using the Up and Down button.
* Move the triangular indicator Up or Down to select the desired feature by pressing
the Up or Down button.
0HQX6HW8S
MAIN SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
SPECO DNR
SPECIAL
ADJUST
RESET
RETURN
DCAUTO
ATW
COLOR
ON
Menu items can be selected by using the OSD buttons of the camera.
1. PRESET

- Used for a quick and easy setup for the installation environment.
* The Advaned Set Up menu will be displayed on the monitor.
SPECO TECH
PRESET MODE
ADVANCED
EXIT
INDOOR

- 19 -


Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
This function is to adjust the brightness of the monitor.


NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol displayed “---“.
/HQV
SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DCAUTO
ATW
COLOR
ON