Speco H4FB1 User manual

INSTRUCTION
MANUAL
4MP Flexible Intensier Technology
TVI 180Degree Camera
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 01/01/2021
H4FB1
(Bullet Camera)
Speco(180 Degree).indd 1 2021-01-08 오후 2:43:11

Contents
- 2 -
◑
Contents...................................................... 2
◑
Precautions ................................................. 3, 4
◑
Safety Instructions ...................................... 5
◑
Package Contents....................................... 6
◑
Camera Installation ..................................... 7-8
◑
Specications.............................................. 9
◑
Camera Dimension ..................................... 10
◑
Features...................................................... 11
◑
OSD Menu Details ...................................... 12- 25
◑
Trouble Shooting......................................... 26
Speco(180 Degree).indd 2 2021-01-08 오후 2:43:11

- 3 -
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
Speco(180 Degree).indd 3 2021-01-08 오후 2:43:13

- 4 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : To prevent electric shock and risk of fire hazards:
ō Do NOT use power sources other than those specified.
WARNING - To prevent electric shock and risk of fire hazards:
୛Do NOT use power sources other than that specified.
୛Do NOT expose this appliance to rain or moisture.
In USA and Canada, Use Class 2 Power Supply Only
Speco(180 Degree).indd 4 2021-01-08 오후 2:43:16

- 5 -
Safety Instructions
Precautions for use
Please handle this camera carefully :
◑ This camera should be installed by qualied personnel only
◑There are no user serviceable parts inside
◑Do not disassemble this camera other than to make initial adjustments
◑Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
◑Do not use a strong or abrasive detergent when cleaning the camera
◑Do not install near cooling or heating device
Speco(180 Degree).indd 5 2021-01-08 오후 2:43:16

- 6 -
Package Contents
Please make sure that the following items are included in the Package:
1) H4FB1 Included Junction Box
• 1 Power Jack
• 1 Mount Base Sticker
• 1 Wrench
• Set Screw
- 4 Tapping Screws 4x25
- 4 Hexagon Socket Screws M4x14
- 4 Plastic Anchor
Speco(180 Degree).indd 6 2021-01-08 오후 2:43:16

- 7 -
Camera Installation
6
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500mA)
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
3. CONNECT VIDEO CABLE
CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.
DC 12V Power Supply
Power In put :R ED
Center : (+)
LBACK:(-)
RED(+)
Power Supply
AC 24V
Speco(180 Degree).indd 7 2021-01-08 오후 2:43:16

- 8 -
Camera Installation
Compatibility
1) H4FB1
INTCM
Speco(180 Degree).indd 8 2021-01-08 오후 2:43:17

- 9 -
F
1/2.8”
0.01Lux
SPECIFICATIONS
H4FB1(1.8mm)
■
4MP TVI 180Degree Camera
1.8mm Fixed Board Lens
Image sensor
Resolution
Framelate
Scanning system
Min. illumination
Video Output
S/N Ratio
Lens
Function
Power Consumption
Operating Temperature
Storage Temperature
Dimensions
Weight
Sensor type
Effective pixels
Total pixels
HD-Analog
Fixed Board / TDN Focal Length
AGC
Shutter Speed
Brightness
Sens-UP
WDR
BLC
HLC
ACE(D-WDR/ATR-EX)
Privacy Masking
DEFOG
D-ZOOM
Day & Night
Smart -IR
White Balance
DNR
Mirror
Sharpness
Defog
Gamma Correction
Shading
Language
System Check
1/2.8" SONY STARVIS 5.69Mega CMOS Sensor
2616(H) X 1964(V), 5.14M Pixels
2704(H) X 2104(V), 5.69M Pixels
720P/1080P/1440P/1944P
NTSC 30P , PAL 25P, 20P, 12.5P
Progressive Scan
0.01 Lux @ F1.2
TVI,CVBS
More than 50dB
f = 1.8mm / 185° (D) x 185° (H) x 140° (V) - ±5%
0 ~ 10 Level Adjustable
AUTO /FLK/ MAMUAL(1/60Sec ~ 1/30000Sec)
0 ~ 20 Level Adjustable
OFF/AUTO (x2 ~ x32)
OFF/ON(LINE/FRAME)LOW/MIDDLE/HIGH
OFF/ON
OFF/ON
OFF/ON(LOW/MIDDLE/HIGH)
OFF/ON (16 Zone)
OFF/ON(LOW/MIDDLE/HIGH)
1.0x ~ 16.0x
Auto(AGC)/COLOR/BW/EXTERN(Lux CTL, PWM CTL)
0~20 Level Adjustable
AUTO(1,700K ~ 11,000K)/AUTOext/PRESET/Manual
2D, 3DNR
MIRROR/FLIP
0~15 Level Adjustable
OFF/ON
O.45 ~ 0.75
OFF/ON
ENG/KOR/CHN1/CHA2/JPN
ON(PUSH) (HD-Analog Output & POWER)
Dual Voltage : DC12V 250mA / AC24V 120mA ±10%(MAX)
-10 ~ +50 Deg C. RH 95% Max.
-20 ~ +60 Deg C. RH 95% Max.
3.12"(Dia)*7.46"(H)
1.5 Ibs
MODEL H4FB1
Speco(180 Degree).indd 9 2021-01-08 오후 2:43:19

- 10 -
Camera Dimension
1) H4FB1
2.33”
3.36”
7.46”
2.33”
3.73” dia 3.12” dia
Speco(180 Degree).indd 10 2021-01-08 오후 2:43:19

- 11 -
General Features
●
Transfer Video Interface
The combination of a 5Mega CMOS image sensor and TVI DSP provides an excellent resolution
of TVI picture.
●
DNR
Smart DNR prevents the image blurring of moving object and activates only if moving objects
are appearing on the scene.
●
Smart-IR
No saturation image, vivid image in darkness! "TVI" camera makes very sharp video image in
darkness! This technology eliminates saturation of video image of the closer object in darkness
by control of the IR sensitivity. Saturation never happens in our "TVI"cameras, you can enjoy
vivid image in any dark condition!
●
Sens-Up
Despite a limited & low light condition, Sens-Up - Max. x32 helps the viewer to get visible and
clear images.
●
Defog
Defog function “improves” the clarity of images taken in poor conditions such as fog, smoke,
rain or snow.
●
WDR
A powerful and advanced technology that captures a high resolution picture even where
images appear dark.
●
CVBS(Composite Video Blanking and Sync)
TV system is switchable 'NTSC' or 'PAL' with built-in OSD.
●
Intelligent Function
An extraordinary technology that enables Speco Technologies TVI to become the ultimate
solution by providing intelligent features based on motion detection. It also strengthens crime
prevention and detection.
Speco(180 Degree).indd 11 2021-01-08 오후 2:43:19

- 12 -
How to Set Up the camera menu
●
Setup Menu
MENU
LENS
SENS-UP
BACKLIGHT
DNR
1.PRESET
2.MAIN SETUP
INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY(WDR) / ELEVATOR
1.ALC
2.EXPOSURE
3.BACKLIGHT
OFF
ON
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN (SAVE/CANCEL)
OFF
HLC
BLC
WDR
LENGTH
RETURN (SAVE/CANCEL)
0~20 default : 10
AUTO
MANUAL
FLICKER
OFF, X2, X4, X8, X16, X32
0~10 default : 10
LEVEL
MODE
RETURN
H-POS
V-POS
H-SIZE
V-SIZE
RETURN (SAVE/CANCEL)
WDR MODE
WEIGHT
RETURN (SAVE/CANCEL)
0~6 default : 0
INDOOR/OUTDOOR/DEBLUR
RETURN (SAVE/CANCEL)
1/30, 1/60, 1/120, 1/250, 1/700, 1/1000, 1/1600, 1/2500, 1/5000, 1/7000, 1/10000, 1/30000(30P)
1/60, 1/120, 1/250, 1/700, 1/1000, 1/1600, 1/2500, 1/5000, 1/7000, 1/10000, 1/30000, 1/50000(60P)
0~20 default : 10
BLK/WHT/YEL/CYN/GRN/MAG/RED/BLU
0~20 default : 11
0~19 default : 10
0~20 default : 3
0~12 default : 3
LINE/FRAME
OFF
BOX
POLYGON
LOW/MIDDLE/HIGH
WINDOW ZONE
WINDOW USE
H-POS
V-POS
H-SIZE
V-SIZE
RETURN (SAVE/CANCEL)
WINDOW ZONE
WINDOW USE
POS0-X
POS0-Y
POS1-X
POS1-Y
POS2-X
POS2-Y
POS3-X
POS3-Y
RETURN (SAVE/CANCEL)
0 ~ 3 default : 0
ON/OFF
0 ~ 1920 default : 426
0 ~ 1080 default : 240
0 ~ 1920 default : 512
0 ~ 1080 default : 432
0 ~ 3 default : 0
ON/OFF
default : 420
default : 240
default : 730
default : 240
default : 426
default : 540
default : 726
default : 540
INDOOR
DC LENS : INDOOR
MANUAL LENS : AUTO
X8
OFF
HIGH
OUTDOOR
DC LENS : OUTDOOR
MANUAL LENS : AUTO
X16
OFF
HIGH
LOWLIGHT
DC LENS : INDOOR
MANUAL LENS : AUTO
X32
OFF
HIGH
HALLWAY
DC LENS : INDOOR
MANUAL LENS : AUTO
X8
OFF
MIDDLE
LOBBY
DC LENS : INDOOR
MANUAL LENS : AUTO
X8
WDR
LOW
ELEVATOR
DC LENS : INDOOR
MANUAL LENS : AUTO
X8
OFF
LOW
SPECO PRESET MODE default
SPECO TECH
Speco(180 Degree).indd 12 2021-01-08 오후 2:43:20

- 13 -
How to Set Up the camera menu
●
Setup Menu
MENU
4.DAY&NIGHT
5.WHITE BAL
6.SPECO DNR
7.IMAGE
AUTO
COLOR
B&W
EXTERN
AUTO/AWB/AWC-SET
MANUAL
OFF/LOW/MIDDLE/HIGH
SHARPNESS
COLOR GAIN
GAMMA
MIRROR
FLIP
D-ZOOM
ACE
DEFOG
SHADING
PRIVACY
D>N THRES(AGC)
N>D THRES(AGC)
DELAY
RETURN (SAVE/CANCEL)
SMART - IR
GHOST_CAT
LED LEVEL
D>N THRES(CDS)
N>D THRES(CDS)
DELAY
RETURN (SAVE/CANCEL)
C-TEMP
R-GAIN
B-GAIN
RETURN (SAVE/CANCEL)
0 ~ 10 default : 10
0 ~ 20 default : 10
0.45, 0.55, 0.6, 0.65
ON/OFF
ON/OFF
1.0X ~ 16X default : 1.0X
OFF, LOW, MIDDLE, HIGH
ON
OFF
ON
OFF
BOX
POLYGON
0~20 default : 13
0~20 default : 3
LOW, MIDDLE, HIGH
0~20 default : 2
ON/OFF
0~10 default : 10
0~20 default : 13
0~20 default : 7
LOW, MIDDLE, HIGH
3000K/5000K/8000K
0~20 default : 10
0~20 default : 10
MODE
LEVEL
RETURN (SAVE/CANCEL)
WEIGHT
RETURN (SAVE/CANCEL)
ON
OFF
ON
AUTO/MANUAL
LOW,MIDDLE,HIGH
0% ~ 100% default : 100%
ZONE NUM
ZONE DISP
H-POS
V-POS
H-SIZE
V-SIZE
Y LEVEL
CB LEVEL
CR LEVEL
TRANS
RETURN (SAVE/CANCEL)
ZONE NUM
ZONE DISP
POS0-X
POS0-Y
POS1-X
POS1-Y
POS2-X
POS2-Y
POS3-X
0~15 default : 0
ON/OFF
0~60 default : 12
0~34 default : 2
0~60 default : 3
0~34 default : 3
0~20 default : 10
0~20 default : 10
0~20 default : 10
0~3 default : 0
0~15 default : 0
ON/OFF
default : 80
default : 5
default : 88
default : 5
default : 88
default : 13
default : 80
Speco(180 Degree).indd 13 2021-01-08 오후 2:43:20

- 14 -
How to Set Up the camera menu
●
Setup Menu
MENU
3.EXIT
8.SYSTEM
9.EXIT
RETURN (SAVE/CANCEL)
VIDEO OUTPUT
IMAGE RANGE
LANGUAGE
CAM TITLE
RESET
RETURN (SAVE/CANCEL)
SAVE/CANCEL
OUTPUT
FRAME RATE
FREQ
CONFIRM
RETURN (SAVE/CANCEL)
FULL
COMP
USER
ENG, CHN, CHN(S), JPN, KOR
OFF
RIGHT UP
LEFT DOWN
ON-PUSHING
OFF
TVI
720/30P, 1080/30P, 1440/30P, 1944/20P, 1944/12.5P
50HZ/60HZ
YES(PUSH)
OFFSET
RETURN
POS3-Y
Y LEVEL
CB LEVEL
CR LEVEL
TRANS
RETURN (SAVE/CANCEL)
0~32 default : 10
default : 13
0~20 default : 10
0~20 default : 10
0~20 default : 10
0~3 default : 2
Speco(180 Degree).indd 14 2021-01-08 오후 2:43:20

- 15 -
2. Move and select the required function using the Up and Down button.
* Move the triangular indicator Up or Down to select the desired feature by pressing
the Up or Down button.
Menu Set Up
Menu items can be selected by using the OSD buttons of the camera.
1. PRESET
1-1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY(WDR) / ELEVATOR.
- Used for a quick and easy setup for the installation environment.
* The Advaned Set Up menu will be displayed on the monitor.
SPECO TECH
1. PRESET
2.MAIN SETUP
3.EXIT
INDOOR
MENU
1. ALC
2. EXPOSURE
3. BACKLIGHT
4. DAY&NIGHT
5. WHITE BAL
6. SPECO DNR
7. IMAGE
8. SYSTEM
9. EXIT
OFF
OFF
AUTO
AUTO
MIDDLE
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
Speco(180 Degree).indd 15 2021-01-08 오후 2:43:20

- 16 -
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol displayed “---“.
1. On the Set Up menu, Select ALC by using the Up or Down button.
1. ALC
◆ ALC[ON/OFF] : Automatic Lens Control (ALC) is easily adjusted fixed lens field of view angle adjustment.
MENU
1. ALC
2. EXPOSURE
3. BACKLIGHT
4. DAY&NIGHT
5. WHITE BAL
6. SPECO DNR
7. IMAGE
8. SYSTEM
9. EXIT
OFF
OFF
AUTO
AUTO
MIDDLE
1. On the Set Up menu, Select EXPOSURE by using the Up or Down button.
2. EXPOSURE
MENU
1. ALC
2. EXPOSURE
3. BACKLIGHT
4. DAY&NIGHT
5. WHITE BAL
6. SPECO DNR
7. IMAGE
8. SYSTEM
9. EXIT
OFF
OFF
AUTO
AUTO
MIDDLE
Speco(180 Degree).indd 16 2021-01-08 오후 2:43:21

- 17 -
2. Select the desired shutter mode by pressing the Left or Right button.
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
10 IIIIIIIIIIIIIIIIIII|
AUTO
X8
10 IIIIIIIIIIIIIIIIIII|
◆ BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20.
◆ SHUTTER : DC lens is launched with the setting of 1/30 and the manual lens is launched
with the setting of Auto shutter, but the shutter speed can be adjusted from 1/30 to 1/50,000.
→ FLK : Select FLK mode if flickering occurs ; caused by the unmatched frequency of electric light.
◆ SENS-UP : The bright screen can be displayed by sensing the degree of the darkness automatically
under the circumstance of low light condition or at night.
→ Off ~x32 Level Adjustable.
◆ AGC (Auto Gain Control) : The higher the AGC level is, the more noises appear.
→ 0~10 Level selectable.
NOTE
* Sens-Up mode is not worked when Electronic shutter is selected as Manual.
3. BACKLIGHT
On this menu, backlight image can be compensated by users selecting one of modes. (HLC, BLC, WDR)
1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
Speco(180 Degree).indd 17 2021-01-08 오후 2:43:21

- 18 -
◆ Off : Deactivated status.
◆ HLC : This function is used to surpress or strong light source (for example, headlights of cars during
nighttime) so that other subjects can be seen in more detail. If you select HLC, a submenu appears
where you can make finer adjustments.
- LEVEL : Adjust the brightness level from which on the light source is to be masked out.
0~20 level adjustable.
- MODE : Select the color of HLC range.
HLC
LEVEL
MODE
RETURN
10 IIIIIIIIIIIIIIIIIII|
BLK
◆ BLC : This function is used to counterbalance the screen image by increasing the brightness so that a
subject which appears dark due to a strong backlight can be displayed in more detail. If you select BLC,
a submenu appears where you can make finer adjustments.
- H-POS/V-POS/H-SIZE/V-SIZE : Define the position and size of the area of interest by changing the position
& size.
BLC
H-POS
V-POS
H-SIZE
V-SIZE
RETURN
11
10
3
3
MENU
1. ALC
2. EXPOSURE
3. BACKLIGHT
4. DAY&NIGHT
5. WHITE BAL
6. SPECO DNR
7. IMAGE
8. SYSTEM
9. EXIT
OFF
OFF
AUTO
AUTO
MIDDLE
Speco(180 Degree).indd 18 2021-01-08 오후 2:43:21

- 19 -
WDR
WDR MODE
WEIGHT
RETURN
FRAME
OFF
◆ WDR : The WDR (Wide Dynamic Range) function works to correct excessive light within the frame to
produce a usable image. When the image has simultaneous bright and dark areas, it makes both areas
distinct. If you select WDR, a submenu appears where you can make finer adjustments.
- WDR MODE : The Specific WDR area can be selected.
* BOX
WINDOW ZONE [0~3]
WINDOW USE [ON/OFF]
H-POS [1~1920] : You can select the horizontal starting position of the monitoring area.
V-POS [1~1080] : You can select the vertical starting position of the monitoring area.
H-ZISE [1~1920] : You can select the horizontal size of the monitoring area.
V-SIZE [1~1080] : You can select the vertical size of the monitoring area.
* POLYGON
WINDOW ZONE [0~3]
WINDOW USE [ON/OFF]
POS0-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS0-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS1-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS1-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS2-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS2-Y : You can select the vertical & Diagonal starting position of the monitoring area.
POS3-X : You can select the horizontal & Diagonal starting position of the monitoring area.
POS3-Y : You can select the vertical & Diagonal starting position of the monitoring area.
- WEIGHT [MIDDLE, HIGH, LOW] : Select the WDR level of the camera.
4. DAY&NIGHT
You can change the color mode of color or black / white by setting up the mode.
1. Select Day&Night using the Up or Down button on the Set Up menu screen.
2. Select the desired mode using the Left or Right buttons.
Speco(180 Degree).indd 19 2021-01-08 오후 2:43:22

- 20 -
◆ AUTO : Automatically, It shifts into the color mode in the bright environment and the B/W mode in the
low light condition. It can adjust the delay time, starting brightness and end brightness according to the
ambient conditions by pressing the Set button.
◆ INTENSIFIER : The bright screen can be displayed by sensing the degree of the darkness automatically
under the circumstance of low light condition or at night.
- SMART IR. : 0~20 smart IR level adjustable.
- GHOST_CAT[ON/OFF] : Get rid of Ghost phenomenon (image dragging) when set-up the SENS-UP.
- LED LEVEL : 0~10 IR ADJUST level adjustable.
- D>N THRES(CDS) : 0~20 CDS THRES level adjustable.
- N>D THRES(CDS) : 0~20 CDS THRES level adjustable.
- DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between COLOR and B/W.
4. DAY&NIGHT
SMART-IR
GHOST_CAT
LED LEVEL
D&N THRES(CDS)
N&D THRES(CDS)
DELAY
RETURN
2 IIIIIIIIIIIIIIIIIII|
OFF
10 IIIIIIIIIIIIIIIIIII|
13 IIIIIIIIIIIIIIIIIII|
7 IIIIIIIIIIIIIIIIIII|
LOW
MENU
1. ALC
2. EXPOSURE
3. BACKLIGHT
4. DAY&NIGHT
5. WHITE BAL
6. SPECO DNR
7. IMAGE
8. SYSTEM
9. EXIT
OFF
OFF
AUTO
AUTO
MIDDLE
5. WHITE BAL
Use this function when the color adjustment of a screen is needed.
1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
Speco(180 Degree).indd 20 2021-01-08 오후 2:43:22