Spectris Malvern Panalytical AERIS User manual
AUTOMATION MANUAL
AERIS
AUTOMATION MANUAL
AERIS
AUTOMATION MANUAL
DISCLAIMER
COPYRIGHT NOTICE
TABLE OF CONTENTS
TABLE OF CONTENTS
CHAPTER 1 INTRODUCTION
CHAPTER 2 HARDWARE AND SIGNALS
2.1 Specifications for Aeris in automation
2.2 Install the conveyor belt
Figure 2.1
Figure 2.2
2.3 Activate the licenses
2.4 Enable automation hardware signals
2.5 Set a static IP address (optional)
CHAPTER 2 HARDWARE AND SIGNALS
2.6 Go to Advanced mode
‑
CHAPTER 2 HARDWARE AND SIGNALS
CHAPTER 3 UNIVERSAL AUTOMATION
INTERFACE
3.1 Messages
3.2 Messages format
Table 3.1
3.3 Sample administration
3.4 TIME_STAMP format
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5 Message contents (COMMANDS)
3.5.1 Request system status
Details
Example
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5.2 Request spectrometer/sample changer/takeover status
Details
Example
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5.3 Request list status
Details
Example 1
Example 2
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5.4 Request sample status
Details
Example 1
Example 2
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5.5 Request parameter status
Details
Example
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5.6 Request location state
Details
Example
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5.7 Request connection status
Details
Example
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5.8 System restart
Details
Example
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
3.5.9 System flush
Details
Example
CHAPTER 3 UNIVERSAL AUTOMATION INTERFACE
Table of contents
Popular Laboratory Equipment manuals by other brands
Agilent Technologies
Agilent Technologies TPS-mobile user manual
l-com
l-com BT-CAT5-NB12 user manual
Agilent Technologies
Agilent Technologies 7200 Operation manual
Tuttnauer
Tuttnauer 2840 EL-D Operation & maintenance manual
KLA Tencor
KLA Tencor P-16+ user guide
Julabo
Julabo CORIO CD Original operating manual