Spedal CL586 User manual

USER MANUAL
MULTIFUNCTIONAL
DASHCAM
004C1907-EN
CL586

If you encounter any problems when reading this manual or using the product, please do
not hesitate to contact us: [email protected]
CONTENT
1. DISCLAIMER AND SAFETY GUIDELINES ��������01
1.1 Disclaimer ������������������������������������������������������������������������������01
1.2 Safety Guidelines���������������������������������������������������������������02
2. ACCESSORIES AND INTERFACES �����������������������03
2.1 In the box��������������������������������������������������������������������������������03
2.2 Product Diagram ����������������������������������������������������������������04
2.3 Installation Guideline������������������������������������������������������05
2.4 Interfaces Introduction��������������������������������������������������08
3. FUNCTIONS AND SETTINGS����������������������������������09
3.1 General Settings ����������������������������������������������������������������09
3.2 Carlink and its settings�������������������������������������������������� 11
3.3 Drive recording and its settings �������������������������������12
3.4 FM and its settings �����������������������������������������������������������13
3.5 Playback and its settings ���������������������������������������������14
4. APPENDIX�������������������������������������������������������������������������15
4.1 Specications ����������������������������������������������������������������������15
4.2 Warranty����������������������������������������������������������������������������������16

1. DISCLAIMER AND SAFETY GUIDELINES
1.1 Disclaimer
This product is a multifunctional dashcam, which will bring you a safe and pleasant
driving experience when the power supply is working normally and the components are
not damaged. Visit http://www.spedal.cc to get the complete "User Manual", pay special
attention to the cautions and warnings in it. Shenzhen Xinzhuang Gude Technology Co.
Ltd. (Spedal) reserves the right to update this User Manual.
The information in this document affects your safety and your legal rights and
responsibilities. Read this entire document carefully to ensure proper configuration
before use. Failure to read and follow the instructions and warnings in this document
may result in product loss, injury to you, or damage to your device. You must strictly
follow Spedal's guidelines to install and use the product, and never use parts that are
not provided or recommended by Spedal. Before assembling, setting up and using, be
sure to visit the o󰀩cial website of Spedal (http://www.spedal.cc) to download the "User
Manual" and carefully read all the instructions and warnings in the document. This
product is not a toy. Please do not allow children to touch this product or its parts and
wires. Please be careful when operating in scenes where children are present.
By using this product, you hereby signify that you have read this disclaimer carefully
and that you understand and agree to abide by the terms and conditions herein. The
user promises to be responsible for his actions and all consequences arising therefrom.
The user promises to use this product only for legitimate purposes, and agrees to all the
terms and contents of this document and any related policies or guidelines that Spedal
may formulate. You understand and agree that in the absence of driving records, Spedal
may not be able to analyze the cause of your product damage or accident, and cannot
provide you with after-sales service such as warranty.
In compliance with laws and regulations, Spedal reserves the right of nal interpretation
of this document and all related documents of this product. If the manual is updated,
revised or terminated, we will not notify you separately. Please visit the o󰀩cial website of
Spedal for the latest product information. Spedal is a trademark of Shenzhen Xinzhuang
Goodo Technology Co. Ltd. and its a󰀩liates. The product names, brands, etc. appearing
in this article are all trademarks or registered trademarks of their respective companies.
Notice: Spedal is not responsible for all losses caused by the user's
failure to use the product in accordance with this "User Manual”�
01

1.2 Safety Guidelines
1�2�1 Warnings
● Please use the original cable and power cords only;
● Do not exceed the rated voltage when using the device;
● Do not install or operate the device with wet hands;
● Do not install the device in places of high temperature, humidity.
● Do not install the device in places of ammable or explosive gases or liquids;
● Do not install the device in an area interfering with the driver's sight or driving safety;
● Do not install the device on the airbag cover or within the airbag’s working range;
● Do not leave the device in a closed vehicle under high temperature for a long time;
● Do not poke the device and its accessories using sharp objects such as awl or scissor;
● Do not disassemble, repair or modify the device and its accessories by yourself;
● Do not install, use or place the device within the reach of any children under 16;
● Do not cut the charging cable.
Notice: Damage caused to the dashcam as result of not obeying the
warnings above is not covered by the warranty!
1�2�2 Cautions
● Do not press the lens forcefully to avoid lens breakage or lens misalignment;
● Do not directly touch the lens surface to avoid stains that a󰀨ect the recording e󰀨ect;
● Do not remove the memory card to avoid le damage during the shutdown process;
● When using the memory card for the rst time, please format it on the device to ensure
stable reading and writing;
● When not using the device for a long time, please pull out the memory card to ensure
the memory card’s performance.
02

2. ACCESSORIES AND INTERFACES
2.1 In the box
Before using this product, please check whether the product package contains all of the
following items. If anything is missing, please contact Spedal or your local agent.
● Multifunctional radar detector ● In-Car charger
● Suction Mount ● Quick Guide
Notice: Please use the SPEDAL original cable and accessories only�
Gifts and accessories are not covered by the warranty� The content of
this product package is subject to change without notice, the actual
package shall prevail!
03

2.2 Product Diagram
Notice: When the function Carlink is activated, the projection chip
and the drive recording chip will work at the same time� The surface
temperature of the heatdissipating metal sheet can reach as high as
60℃, which is within normal range of working temperature� Please do
not touch the sheet surface for a long while to prevent being scalded�
GPS Input
TF Card Slot
AV-IN
Mount Locking Clip
USB / Power Input
Touch screen
Reset button
Loudspeaker
heat-dissipating metal sheet
Adjustable camera
Power button
04

2.3 Installation Guideline
The device is in the storage state when it leaves the factory. Please follow the steps
below to prepare for installation.
1. Take the device and its accessories out of the box or plastic bag;
2. Tear o󰀨 the protective lm on the screen and lens of the device if there is any;
3. Remove the wire tie that binds the wire.
2�3�1 Installation Position
● Do not install the device in a position blocking the view of the driver or in an unsafe
area.
● Install the device near the rearview mirror but not in a place blocking the driver vision.
● Install the device within the wiper blade area to ensure clear capture on rainy days.
● Do not install the device on the airbag cover or near the airbag operating range.
● Do not install the device on the windscreen protection lm to prevent damage to the
lm.
● Install the device in a position not a󰀨ecting any other electronic devices in your vehicle.
Note: Please follow the instruction or warnings above strictly� Our
company assumes no responsibility for any injury or death caused by
car impact or airbag problems�
05

2�3�2 Card Installation
Install the TF card in the TF socket with the pins facing upwards. Push the TF card
forward, and the card can be removed after it pops out.
Please use the 32GB TF card that comes with the product. A third-party TF card should
meet these requirements: Class 8 or above, maximal 128GB.
Note: Installing and removing the TF card in the recording mode may
result in failure of recording videos and causing damage to the TF
card. Please turn o󰀨 the device before inserting or unplugging the TF
card�
Note: When recording or snapping, if the TF card is not inserted or
the TF card is abnormal, the device will broadcast an alarm sound
of "dididi" and show a pop-up window to remind the user that the TF
card is not inserted�
06

2�3�3 lnstallation Method
1. Aim the magnetic transfer slide buckle at the mount buckle on the device.
2. Hold the device and chuck bracket with your hands, and aim the mount at the chuck
bracket on the device.
3. Select a proper position (such as the center of the rearview mirror), attach the suction
mound to the windshield and rotate the mount clockwise to lock.
4. Adjust the recording angle (it is the best angle that the car front shows in the middle of
the display).
Note: The suction mount can be replaced by the sticker mount� Select
a proper position, tear the protective paper and paste into the front
windshield (do not move it within 24 hours)
07

2.4 Interfaces Introduction
2�4�1 Main Interface
Time & Date: The time and date can be set in the settings.
Settings: General settings of the device.
Carlink: Carlink to project your mobile phone onto the dashcam.
Dashcam: Photo and video shooting during drive process.
FM: FM to transfer the sound of your mobile phone onto the car loudspeaker.
Playback: Viewing of the photos and the videos.
Note: For more detailed introduction of the device functions and
settings, please refer to chapter 3� FUNCTIONS AND SETTINGS of this
manual�
08
Carlink
Settings
12:00
08-08 Sunday
FM PlaybackDashcam

3. FUNCTIONS AND SETTINGS
3.1 General Settings
Click “Settings” on the main interface to enter “General Settings”.
Click to return to the main interface. Scroll to see all subcategories.
● Screen saver
Default is Off. Choose time length to start the screen saver program during drive
recording.
Options: O󰀨 / 1 minute / 3 minutes
● Time setting
Date and time settings.
● Resolution
Default is 1080P(Front) + 1080P(Rear)
Options: 1080P(F) + 1080P(R) / 720P(F) + 720P(R)
Notice: You can match suitable rear camera for this device�
● Video duration
Default is 1 minute. Video duration when drive recording.
Options: 1 minute / 2 minutes / 3 minutes
Screen saver
Time setting
Resolution
Video duration
Gravity sensor
12:00
08-08 Sunday
09

● Gravity sensor
Default is O󰀨. Sensitivity of the Gravity sensor (G-Sensor). Emergency videos activated
by collision will be locked and can not be overwritten.
Options: O󰀨 / High / Low
● Park Monitoring
Default is O󰀨. Auto video recording for 1 minute when car is parked and sensed collision.
Emergency videos activated by collision will be locked and can not be overwritten.
Options: O󰀨 / High / Low
● Keyboard clicks
Default is On. Feedback sound of clicking.
Options: O󰀨 / On
● Language
System language.
Options: English, Detusch, 简体中⽂ , 繁体中⽂ , ⽇本語
● Firmware Version
View the 󽗉rmware version.
● Flicker frequency
Default is 50Hz.
Options: 50Hz / 60Hz
● Reset settings
Reset all settings back to factory settings, without deleting data from TF card.
Options: Yes / No
● Format TF Card
Format the TF card and delete all data.
Options: Yes / No
10

3.2 Carlink and its settings
Carlink technology will allow you to project your mobile phone screen onto the dashcam
screen. Please make sure your mobile phone has projection or screen mirroring function.
Click “Carlink” on the main interface to enter the carlink interface and follow the following
instructions or follow the guideline on screen (as shown in the picture below) to connect
your mobile phone to the dashcam.
Carlink Instruction:
1. Disconnect your mobile phone to any other WIFI;
2. Keep the WIFI option on your mobile phone “ON”;
3. Find the device WIFI “Spedal-Carlink” on your mobile;
4. Enter the WIFI password to connect to the wi;
5. Open the “Projection” or “Screen Mirroring” on your mobile phone;
6. Select the device name “Spedal-Carlink” on your mobile;
7. Screen and sound synchronization begin.
Note: Some mobile brands allow the projection/screen mirroring
programs running in the background� While some brands allows only
simultaneous projection� Please consult your mobile phone supplier
to confirm if you need to keep your mobile phone screen always on
during projection� If you have any problems when using this function,
please free to contact us: support@spedaltech�com
1. Select DEVICE NAME in the WIFI-Settings in your mobile;
2. Enter WIFI PASSWORD in your mobile to connect device;
3. Select DEVICE NAME in projection settings in your mobile;
4� The device will allow simultaneous projection / screen mirroring.
Carlink
Contact [email protected] for consultation
DEVICE NAME WIFI PASSWORD IP ADDRESS VERSION
11

3.3 Drive recording and its settings
Click “Drive Recording” on the main interface to enter the dashcam interface.
Note:
1� You can change resolution and time in Settings�
2� The audio recording status has two status: ON/OFF� You can switch
the status by clicking on the “Audio recording” icon at the bottom of
the screen�
3� The lock file status has two status: Locked/Unlocked� You can
switch the status by clicking on the “Lock le” icon at the bottom of
the screen�
4� The video length sign will appear only when a video is being
recorded� You can change the video duration in settings�
5� The function “switch front and rear camera” can only be used when
an additional camera is connected to the device�
12
1080P 2020-05-16 07:03:21 00:00:00
Video Length
Lock File Status
Audio Recording Status
Settings - Time
Settings - Resolution
Switch Front And Rear Camera
Settings
Lock File
Return
Take A Photo
Record Video
Audio Recording
Playback

3.4 FM and its settings
Before using this function, please ensure at first that your mobile
phone has been connected to the dashcam through Carlink(refer to 3�2
Carlink and its settings) and screen and sound synchronization have
begun properly�
FM transmitter technology allows you to launch specic FM frequency - 91.0MHZ from
the dashcam. Once you adjust the radio frequency on your car to the same level -
91.0MHZ. The car’s loudspeaker will synchronize the sound from the dashcam which
originate from your mobile phone. In other word, the users can play music or use
navigation sound or any audio les on their mobile phones and the sound will come out
from their car’s loudspeakers through the FM transmitter technology.
0.0MHZ
Increase
Save The Conguration
Decrease
Fm Frequency
Value To Zero
Return
13

3.5 Playback and its settings
3�5�1 Playback Interface
3.5.2 Expanded le
14
FILE200516-083422-000103F.TS
FILE200516-083321-000102F.TS
FILE200516-083221-000101F.TS
FILE200516-083121-000100F.TS
FILE200516-083021-000099F.TS
FILE200516-082920-000098F.TS
FILE200516-082820-000097F.TS
FILE200516-082720-000096F.TS
01/13
File Preview, Click To Expand
Current Page / Total Page
Selected File In Red
Return
Unlocked
Locked Videos
Photos
Switch Files Of Front/rear
Unselected File In White
Video Sequences
Play And Pause Status
Forward
Play / Pause
Backward
Lock / Unlock Current File
File Name
Delete
Return
Video Duration
Date & Time
FILE200516-075517-000059F.TS 00:00:00 / 00:01:00
2021/05/16 07:56:13
21/25

4. APPENDIX
4.1 Specications
Display 5.0" full view IPS LCD screen
Aperture F#1.8
Resolution 1080P
Angle 120°
USB Mini USB 2.0
Video format TS
Photo format JPEG
Storage device TF card (Max support 128GB)
Operating temp� -20℃~65℃
Storage temp� -30℃~75℃
15

16
www.spedal.cc
Scan QR code
4.2 Warranty
Thank you for purchasing the Spedal multi-function driving recorder. This product has
a powerful driving record function, and at the same time you can project your mobile
phone interface to the driving recorder in real time. This product is a major breakthrough
in the technology of driving recorders in the industry.
Customers enjoy up to one year of warranty and after-sales service from the date of
purchase. During this period, our company will actively respond to customer problems
and provide maintenance services for product failures under normal use. Repairs within
the warranty period, delivery of the product for repair or replacement, and shipping back
to the original factory shall be paid by the product owner or the person sending the
repair.
The company reserves the right to reject maintenance requirements caused by the
following situations, including but not limited to:
1. Failure to follow the instructions in the manual and improper use may cause the
machine to malfunction or damage;
2. Failure due to unauthorized disassembly, modication or maintenance of equipment;
3. Equipment damage caused by natural disasters or other force majeure factors;
4. The warranty period of the equipment has expired;
5. Buyers purchase second-hand products that do not meet the warranty conditions from
informal channels.
Please strictly follow the instructions in this manual to use this product to avoid
unnecessary losses. If you have any questions or problems while reading the product
manual or using the product, please contact us by email: [email protected] or
visit our o󰀩cial website.