NX18 NX30
Capacity - lb (kg) 18 (8) 30 (14)
Width - in (mm) 26” (660) 30 3/4” (780)
Depth - in (mm) 29 1/8” (739) 33 1/8” (842)
Height - in (mm) 40 7/8” (1038) 47 3/8” (1202)
Cylinder Diameter - in (mm) 20 7/8” (530) 25 5/8” (650)
Cylinder Depth - in (mm) 13” (330) 15 3/4” (400)
Cylinder Volume - cu. ft. (liters) 2.7 (76) 5.9 (132)
Door Opening Size - in (mm) 11 7/8” (300) 11 7/8” (300)
Door Bottom to Floor - in (mm) 11” (280) 15” (381)
Wash Speed - RPM 10-50 10-50
Distribution Speed - RPM 85 85
Extract Speed - RPM 250-1000 100-1000
G-Force Factor - RPM 74-296 88-363
Water Inlet Conn. - in (mm) 3 x 3/4” (19) 3 x 3/4” (19)
Drain Connection Size - in (mm) 2” (51) 2” (51)
Motor Size - HP (kw) 1 (.75) 2 (1.5)
Voltage/Hz/Phase Non-heat 200-240/50-60 1 200-240/50-60 1
Circuit Breaker 15 15
Voltage/Hz/Phase* Elect. heat 200-240/50-60/3 200-240/50-60/3
Circuit Breaker 25 50
Voltage/Hz/Phase Elect. heat 380-415/50-60/3 380-415/50-60/3
Circuit Breaker 16 32
Shipping Dimensions - H 44 7/8” (1140) 51 5/8” (1310)
in (mm) W 29 1/8” (740) 33 1/2” (850)
D 33 1/8” (840) 37” (940)
Net Weight - lb (kg) 465 (211) 717 (325)
Shipping Weight - lb (kg) 514 (233) 783 (355)
Agency Approvals CE, ETL CE, ETL
AC05-208
Washer-Extractor Specifications
* Special order may require longer time, check with factory.
Due to the continous product improvements, design and specifications
subject to change without notice.
©Copyright 2005 Alliance Laundry Systems LLC
www.speedqueen.com
Variable Speed Drive
Since all fabrics have different
extract speed requirements, our
line of softmount washer-extractors
have variable extract speeds. A low
extract speed is ideal for synthetics,
permanent press and blends. A
mid-range extract speed is ideal
for mattress pads, blankets and
spreads. A high extract speed is
ideal for terry and cotton items.
A higher G-Force during extraction
lowers the water retention of the
fabrics being processed. Lower water
retention also reduces the gas or
electricity used during the drying
process, saving money on utilities
and improving customer turnover.
Superior Performance
Suspension
Extensive
engineering
efforts have
developed a
heavy-duty
suspension
system
designed for
superior washing performance
and absorb out-of-balance load
vibrations without the need for
special foundations.
Durable 304
polished
stainless steel
construction
on the washer-
extractors
won't corrode,
chip, crack or pit with normal use,
and is extremely rust resistant. In
fact, the polished stainless exterior,
top and front panels will maintain
their lustrous appearance for years
to come.
Stainless Steel
Construction
Speed Queen’s 18 lb and 30 lb
capacity softmount washer-
extractors fit through 36” door
openings. Softmount washer-
extractors require no additional
cement base, making installation
easier and less costly.
Easy Installation
As the No.1 supplier of commercial
coin-operated laundry equipment,
Speed Queen continues to lead in
customer satisfaction with its top-
of-the-line commerical laundry
equipment. Manufactured with
quality components, Speed Queen
coin-operated washers and dryers
are durable, rugged and built better
to last longer.
Commercial Quality
Our advanced
microprocessor
control is
designed to
offer eight pre-programmed cycles.
These cycles can be customized to
fit your specific needs. Customized
cycles can significantly reduce
water consumption or reduce
turnaround time by doing the
maximum amount of cleaning in
the shortest amount of time. The
micro control is easy to operate
utilizing a separate start pad and
cycle symbols designed to match
garment care labels.
Fully Programmable
Control
