Sper scientific WBGT User manual

WBGT Heat Stress Meter
800036

2
WBGT Heat Stress Meter - 800036
Copyright ©2015 by Sper Scientic
ALL RIGHTS RESERVED. Printed in the USA
The contents of this manual may not be reproduced
or transmitted in any form or by any means electronic,
mechanical, or other means that do not yet exist or may
be developed, including photocopying, recording, or any
information storage and retrieval system without the express
permission from Sper Scientic.
HEAT STRESS REFERENCES:
Refer to any of the following organizations for
current and reliable data regarding heat stress
threshold recommendations and guidelines.
• American Conference of Governmental Industrial
Hygienists (www.acgih.org).
• American Industrial Hygiene Association
(www.aiha.org).
• Canadian Centre for Occupational Health & Safety
(www.ccohs.ca).
• Environmental Protection Agency (www.epa.gov).
• International Organization for Standardization
(www.iso.org).
• National Climatic Data Center (www.ncdc.noaa.gov).

3
TABLE OF CONTENTS
INTRODUCTION. . . . . . . . . . . . . . . . 4
FEATURES. . . . . . . . . . . . . . . . . . . 5
MATERIAL SUPPLIED . . . . . . . . . . . . . 5
UNIT DESCRIPTION. . . . . . . . . . . . . . 6
KEYPAD . . . . . . . . . . . . . . . . . . . . 7
LCD DISPLAY . . . . . . . . . . . . . . . . . 8
FUNCTION SELECTIONS . . . . . . . . . . . 9
Display Mode Selection . . . . . . . . . . . 9
Heat Index Measurement . . . . . . . . . 10
Non-Sleep Mode Selection. . . . . . . . . 10
Alarm Threshold Selection . . . . . . . . . .11
Data Analysis. . . . . . . . . . . . . . . . 12
BATTERY REPLACEMENT . . . . . . . . . 13
TROUBLESHOOTING . . . . . . . . . . . . 13
ERROR CODES . . . . . . . . . . . . . . . 14
SPECIFICATIONS . . . . . . . . . . . . . . 15
WARRANTY . . . . . . . . . . . . . . . . . 16

4
INTRODUCTION
The Sper Scientic WBGT (Wet Bulb Globe
Temperature) Heat Stress Meter (Model 800036) is
light-weight, portable, and provides the most accurate
determination of the heat stress index based on the
cumulative e󰀨ect of air temperature, air movement,
relative humidity, and radiant heat.
The WBGT Heat Stress Meter provides highly accurate
readings with a typical response time of only 15
seconds. The WBGT Heat Stress Meter provides
settings for both indoor and outdoor activities, and
includes an audible alarm that is adjustable to your
WBGT threshold.
You can use the WBGT Heat Stress Meter almost
anywhere to determine appropriate exposure levels
to high temperatures and avoid heat exhaustion
during athletic events, military exercises, and
industrial activities.
This WBGT Heat Stress Meter comes fully calibrated
from our manufacturing facility, and should maintain
it’s calibration.

5
FEATURES
• Light-weight, Portable, and Accurate—Provides
accurate readings with a typical response time
of only 15 seconds, and settings for both
indoor/outdoor activities.
• Threshold Alarm—An audible alarm that is adjustable
to your WBGT threshold.
• Long-Life Battery Operation—An expected battery
life of more than 1000 hours (alkaline) and 250 hours
(general purpose).
• Tripod Mountable—A tripod screw mount for hands-
free monitoring.
• Data Analysis—USB port to connect with a PC for
real-time data analysis. USB cable and data software
sold separately.
MATERIALS SUPPLIED
Meter
Batteries
Instruction Manual

6
Black Ball Sensor Shell
Sensor
Sensor Cover
Sensor Housing Screws (front
and back of unit)
Tripod Screw (back of unit)
LCD Display
Power/Set, Mode and
Next Buttons
USB Port (side of unit)
Battery Compartment
(back of unit)
UNIT DESCRIPTION

7
KEY PAD
Press the SET button to turn on/
o󰀨 the unit and to enter the alarm
setting mode.
Press the NEXT button to select a
digit in the alarm setting mode
and to exit the setting mode
when complete.
Press the MODE button to change
the display mode, to select the
environment mode (IN/OUT), and
to change the values when setting
the alarm mode.
+
Press the SET and MODE button
simultaneously to select Non-Sleep
mode and prevent the unit from
turning o󰀨 automatically.
+
Press the NEXT and MODE button
simultaneously to select between
°C & °F temperature scales.

8
LCD DISPLAY
WBGT - Wet Bulb
Globe Temperature
A composite temperature
used to estimate the e󰀨ect
of temperature, humidity,
wind chill, and solar
radiation on humans.
TG - Black Globe Temperature
Temperature as measured by a black globe thermometer,
which monitors the e󰀨ects of direct solar radiation on an
exposed surface. This temperature is analogous to what
you feel when standing in the sun.
TA - Air Temperature (Ta)
The standard temperature as normally referenced in
weather observations and forecasts.
% - Relative Humidity
The percentage of water vapor in the air.
IN/OUT - Indoor/Outdoor
Environment with or without direct sun exposure using
the following equations:
Indoor/Outdoor (No Sun): WBGT=0.7 WB + 0.3 TG
Outdoor (Full Sun): WBGT=0.7 WB + 0.2 TG + 0.1 TA

9
C/F - Celsius/Fahrenheit
Ambient temperature in either Celsius or Fahrenheit.
- Low Battery Indicator
The low battery icon indicates that you must replace
the batteries.
DP/REC/888 - Unused
These indicators are reserved for use in future models.
Please disregard.
FUNCTION SELECTIONS
This WBGT Heat Stress Meter comes fully calibrated
from our manufacturing facility, and should maintain
it’s calibration.
Display Mode Selection
1. Turn on the meter by pressing the SET button.
The LCD display turns on and the meter enters
measuring mode.
2. Short press the MODE button to select the RH,
WBGT, TA, and TG modes, respectively.
3. Press and hold the MODE button, to select either
IN (for indoor measurements) or OUT (for outdoor
measurements). Each time you press and hold the
MODE button, the LCD display switches between
IN and OUT.

10
4. When reading temperature, press the MODE
and NEXT buttons simultaneously to select
between a Celsius (C°) and Fahrenheit (F°)
temperature reading.
Heat Index Measurement
1. Turn on the meter by pressing the SET button. The
LCD display turns on and enters measuring mode.
2. Slide down the sensor protective cover. The LCD
displays the value for the selected display mode
within 15 seconds.
3. When you have completed your readings, slide the
cover back up to its protective position and press the
SET button to turn o󰀨 the unit.
Non-Sleep Mode Selection
To save battery life, the WBGT Heat Stress Meter
turns o󰀨 automatically after 20 minutes of inactivity.
To monitor the environment continuously for longer
periods, you may override this feature:
1. With the meter turned o󰀨, press and hold the SET
and MODE buttons simultaneously for 2 seconds.
The meter displays П and enters Non-Sleep
measurement mode.