IMPORTANT
SAFETY
INSTRUCTIONS
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your SOLE climber from the
electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the
climber on a flat level surface with access to a 230-volt, 5-amp grounded outlet with only
the climber plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER.
Do not operate climber on deeply padded, plush or shag carpet. Damage to both
carpet and climber may result.
Keep children away from the climber. There are obvious pinch points and other
caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the climber if it has a damaged cord or plug. If the climber is not
working properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is
being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position and then remove the plug from the
outlet.
Do not attempt to use your climber for any purpose other than for the purpose it is
intended.
The hand pulse sensors are not medical devices. Various factors, including the
user’s movement, may affect the accuracy of heart rate readings. The pulse sensors
are intended only as exercise aids in determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable
for use on your climber. Quality athletic shoes are recommended to avoid leg fatigue.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
