S+S Regeltechnik HYGRASGARD 4100 Series Operating instructions

OPERATING INSTRUCTIONS,
MOUNTING & INSTALLATION
HYGRASGARD® 4100 Series
RFF ⁄ RFTF
Room humidity and temperature sensors,
with or without display, on-wall, calibrateable
 1572 03 ⁄ 2010
S+S REGELTECHNIK GMBH
KLINGENHOFSTRASSE 11
90411 NUREMBERG ⁄ GERMANY
PHONE +49 (0) 911 ⁄ 5 19 47- 0
FAX +49 (0) 911 ⁄ 5 19 47- 70
ma[email protected]
www.SplusS.de
S+S stands for reliable control technology resulting from certified
development and production while employing high-quality materials.
Our products combine easy mounting & installation and precision you feel
with long service life in the patented original design.
Guaranteed made in Germany!
PRECISION YOU FEEL. THE ORIGINAL. MADE IN GERMANY.
Congratulations!
You have bought a German
quality product.
MADE
IN
GERMAN Y
1

HYGRASGARD® 4100 Series
RFF ⁄ RFTF
Room humidity and temperature sensors, on-wall, calibrateable,
with active ⁄ passive output, series Frija II
Quality product for HVAC sector, accuracy 3 % r. H.
The calibrateable room humidity and temperature sensor HYGRASGARD® RFF ⁄ RFTF measures the
relative humidity and ⁄ or temperature of air. It converts the measurands humidity and temperature
into standard signals of 0 -10 V or 4...20 mA and is optional available with or without display (for dis-
playing actual humidity and actual temperature) in an elegant enclosure made of plastic, with snap-on
lid, base with 4-hole attachment for installation on vertically or horizontally installed in-wall flush boxes,
with predetermined breaking point for on-wall cable entry, or in enclosures made of stainless steel
(top and bottom part are of stainless steel, the lid is screwed on), vandalism-secure version e.g. for
schools, military barracks, and public buildings. Relative humidity (in % r.H.) is the quotient of water
vapour partial pressure divided by the saturation vapour pressure at the respective gas temperature.
HYGRASGARD® RFF ⁄ RFTF are applied in non-aggressive dust-free ambiences in refrigeration, air
conditioning, ventilation and clean room technology, in interior rooms such as residential rooms, of-
fices, hotels, technical rooms, meeting rooms and convention centres. These measuring transducers
are designed for exact detection of air temperature and humidity. A digital long-term stable sensor is
used as measuring element for humidity and temperature measurement. Fine adjustment by the user
is possible.
TECHNICAL DATA:
Power supply: ..................................
24 V AC (± 20 %) and 15 … 36 V DC (± 10 %) for U variant
15 … 36 V DC (± 10 %) for I variant (depending on working resistance)
Power consumption: ....................... < 1.1 VA ⁄ 24 V DC ; < 2.2 VA ⁄ 24 V AC
Sensors: ........................................... digital humidity sensor with integrated temperature sensor,
dew-proof, small hysteresis, high long-term stability
HUMIDITY:
Measuring range, humidity: ........... 0 …100 % r. H. (output corresponding to 0 -10 V or 4 … 20 mA)
Operating range, humidity: ............ 0 … 95 % r. H. (without formation of dew)
Deviation, humidity: ......................... ± 3 % r. H. (20…80 %) at +20 °C, otherwise ± 5 % r. H.
Output, humidity: ............................. 0 -10 V at U variant 4 … 20 mA at I variant,
working resistance < 800 Ω, see load resistance diagram
TEMPERATURE:
Measuring range, temperature: ... 0 … + 50 °C (output corresponding to 0 -10 V or
4 … 20 mA or Ohm value) others upon request!
Operating range, temperature: .... 0 …+ 50 °C
Deviation, temperature: ................. ± 0.8 K at 20 °C, under standard conditions
Output, temperature: ..................... 0 -10 V or 4 … 20 mA or Ohm value
Ambient temperature: ................... storage - 25 …+ 50 °C, operation - 5 …+ 55 °C
Electrical connection: ..................... 2-, 3- or 4-wire connection (see connecting diagram)
0.14 -1.5 mm ² via terminal screws on circuit board
Enclosure: ........................................ plastic, material ABS,
colour pure white (similar RAL 9010),
stainless steel enclosure optional
Dimensions: ..................................... 98 x 106 x 32 mm (Frija II)
100 x 100 x 25 mm (stainless steel)
Installation: ....................................... wall mounting or on in-wall flush box, Ø 55 mm,
base with 4-hole for mounting on vertically or horizontally
installed in-wall flush boxes for cable entry from the back,
with predetermined breaking point for on-wall cable entry
from top ⁄ bottom in case of plain on-wall installation
Long-term stability: ......................... ±1 % per year
Protection class: ............................. III (according to EN 60 730)
Protection type: .............................. IP 30 (according to EN 60 529)
Standards: ....................................... CE conformity,
according to EMC directive 2004 ⁄ 108 ⁄ EC,
according to EN 61326-1: 2006,
according to EN 61326-2-3: 2006
Optional: ........................................... two-line display with illumination, 36 x15 mm (W x H),
for displaying ACTUAL temperature and ⁄ or ACTUAL humidity
RFF ⁄ RFTF
without display
(Frija II)
2

The two-line display readout switches
between the ACTUAL humidity reading
in % r. H. and the ACTUAL temperature
reading in °C.
Backlighting is installed for better
instrument readability.
Dimensional drawing RFF ⁄ RFTF
Enclosure Frija II
RFF ⁄ RFTF
with illuminated display
Connection Display RFF ⁄ RFTF
with illuminated display
Display Readout RFF ⁄ RFTF
with illuminated display
3

Dimensional drawing RFF ⁄ RFTF
Enclosure stainless steel
RFF ⁄ RFTF
in stainless steel enclosure
Enclosure Frija
To open the enclosure, set a screwdriver (2.0) in the groove
at centre, press down, and lift up the bottom frame slightly.
Pull top cover forward and hold it.
4

Connecting diagram RFTF - I
(passive temperature
sensor)
Connecting diagram RFTF - U
RFTF - U mit Display
Connecting diagram RFTF - I
(Transmitter)
Connecting diagram RFF - U Connecting diagram RFF - I
(Transmitter)
Connecting diagram RFTF - U
(passive temperature
sensor)
Schematic diagram RFTF - U - x
RFTF - U - x with display
Schematic diagram RFTF - I - x
RFTF - I - x with display
1
2
3
4
–UB-GND
Free
Output humidity in % r.H. 0-10 V
+UB 24V AC/DC
1
2
3
4
–UB-GND (optional for backlighting)
Free
Output humidity in % r.H. 4-20mA
+UB 24V DC
1
2
3
4
5
6
Passive element
–UB-GND
Output temperature in °C 0-10V
Output humidity in % r.H. 0-10 V
+UB 24V AC/DC
e.g. Pt1000, Ni1000,
LMZ235Z
1
2
3
4
5
6
Passive element
–UB-GND (optional for backlighting)
Output temperature in °C 4–20mA
Output humidity in % r.H. 4–20mA
+UB 24V AC/DC
e.g. Pt1000, Ni1000,
LMZ235Z
1
2
3
4
–UB-GND
Output temperature in °C 0-10V
Output humidity in % r.H. 0-10 V
+UB 24V AC/DC
1
2
3
4
Output temperature in °C 4-20mA
Output humidity in % r.H. 4-20mA
+UB 24V DC
–UB-GND (optional for backlighting)
6
1 2 3 4
5
+UB 24V AC/DC
Output humidity in % r.H. 0-10V
Output temperature in °C 0-10V
–UB-GND
Plug for display
min. max.min. max.
Offset
°C r.H.
Passive sensor
Offset temperature : ± 5 K
Offset humidity : ± 10% r.H.
6 5
4321
+UB 24V DC
Output humidity in % r.H. 4-20mA
Output temperature in °C 4-20mA
- UB-GND (optional
for LCD backlighting)
Plug for display
min. max.min. max.
Offset
°C r.H.
Passive sensor
Offset temperature : ± 5 K
Offset humidity : ± 10% r.H.
5

Type overview
HYGRASGARD® RFTF-U, x F Output: Humidity (relative) active, temperature passive
HYGRASGARD® RFF and RFTF Output: Humidity (relative) and temperature active
Type ⁄ WG1 Measuring Range ⁄ Readout Output
Designation Item No. Humidity Temperature Humidity Temperature
RFTF-U, Pt100 HYGRASGARD-4131-1001-000 0 …100 % r. H. 0…50 °C 0 - 10 V Pt100
RFTF-U, Pt1000 HYGRASGARD-4131-1005-000 0 …100 % r. H. 0…50 °C 0 - 10 V PT1000
RFTF-U, Ni1000 HYGRASGARD-4131-1009-000 0 …100 % r. H. 0…50 °C 0 - 10 V Ni1000
RFTF-U, Ni1000 TK5000 HYGRASGARD-4131-1010-000 0 …100 % r. H. 0…50 °C 0 - 10 V Ni1000TK5000
RFTF-U, NTC 1,8 k HYGRASGARD-4131-1012-000 0 …100 % r. H. 0…50 °C 0 - 10 V NTC 1,8 k Ohm
RFTF-U, NTC 10 k HYGRASGARD-4131-1015-000 0 …100 % r. H. 0…50 °C 0 - 10 V NTC 10 k Ohm
RFTF-U, NTC 20 k HYGRASGARD-4131-1016-000 0 …100 % r. H. 0…50 °C 0 - 10 V NTC 20 k Ohm
RFTF-U, LM 235 Z HYGRASGARD-4131-1021-000 0 …100 % r. H. 0…50 °C 0 - 10 V LM235Z, 10mV ⁄ K
RFTF-U, xx - Display Two-line display with illumination
RFTF-U, xx - Stainless steel enclosure
Type ⁄ WG1 Measuring Range ⁄ Readout Output
Designation Item No. Humidity Temperature Humidity Temperature
RFF - I HYGRASGARD-4132-0000-000 0 …100 % r. H. – 4 … 20 mA –
RFF - U HYGRASGARD-4131-0000-000 0 …100 % r. H. – 0 - 10 V –
RFTF - I HYGRASGARD-4132-1000-000 0 …100 % r. H. 0 … 50 °C 4 … 20 mA 4 … 20 mA
RFTF - U HYGRASGARD-4131-1000-000 0 …100 % r. H. 0 … 50 °C 0 - 10 V 0 - 10 V
RFTF - xx - Stainless steel enclosure
RFF - I - Display HYGRASGARD-4132-0200-000 0 …100 % r. H. – 4 … 20 mA –
RFF - U - Display HYGRASGARD-4131-0200-000 0 …100 % r. H. – 0 - 10 V –
RFTF - I - Display HYGRASGARD-4132-1200-000 0 …100 % r. H. 0 … 50 °C 4 … 20 mA 4 … 20 mA
RFTF - U - Display HYGRASGARD-4131-1200-000 0 …100 % r. H. 0 … 50 °C 0 - 10 V 0 - 10 V
6

Load resistance diagram RFF ⁄ RFTF
4 … 20 mA
Technical data
Temperature table Range: 0 …+50 °C
°C UA in V IA in mA
0 0 4.0
5 1 5.6
10 2 7.2
15 3 8.8
20 4 10.4
25 5 12.0
30 6 13.6
35 7 15.2
40 8 16.8
45 9 18.4
50 10 20.0
Humidity table Range: 0 …100 % r. H.
% r.H. UA in V IA in mA
0 0 4.0
5 0.5 4.8
10 1.0 5.6
15 1.5 6.4
20 2.0 7.2
25 2.5 8.0
30 3.0 8.8
35 3.5 9.6
40 4.0 10.4
45 4.5 11.2
50 5.0 12.0
55 5.5 12.8
60 6.0 13.6
65 6.5 14.4
70 7.0 15.2
75 7.5 16.0
80 8.0 16.8
85 8.5 17.6
90 9.0 18.4
95 9.5 19.2
100 10.0 20.0
800
700
600
500
400
300
250
50
200
10 15 20 25 30 35 36 40
Load resistance diagram
Working resistance (Ohm)
Operating voltage (V DC)
Admissible
range
Note
For 4...20 mA devices, DC voltage must be used
(without residual ripple, see permissible range of
load resistance diagram). Do not use pulsating DC
voltage.
7

Notes
Errors and technical changes excepted.
Notes regarding products RFF ⁄ RFTF
- This device may only be used in non-precipitating air without any above-atmospheric or below atmospheric pressure at the sensor
element.
- Dust and contamination distort the measurement result and are to be avoided. Minor contaminations and dust deposits can be
removed using compressed air.
- Touching the humidity sensor element must absolutely be avoided as this would cause significant measurement errors.
- In case of contamination we recommend cleaning and recalibration at the factory.
- Chemicals or other cleaning agents must under no circumstances get onto the sensor.
- Relative humidity in the range of 0 ...100 % is indicated by the output signal of 0 – 10 V or 4 ... 20 mA. The operating range of the device
comprises 0.0 ... 95.0 % r.H.; beyond that range measurement errors respectively deviations increased may occur.
- When connecting several sensors (0 – 10 V) to one common power supply of 24 V AC (alternating voltage) correct polarity must be
observed as otherwise the alternating voltage source my be short - circuited.
- The voltage outputs are short - circuit proof, applying overvoltage at the voltage output can destroy the device.
- If these devices are operated beyond the specified range, all warranty claims are forfeited.
General notes:
- Devices must only be connected to safety extra - low voltage.
- To avoid damages and errors at the device (e.g. by voltage induction) shielded cables are to be used,
laying parallel with current - carrying lines is to be avoided, and EMC directives are to be observed.
- This device shall only be used for its intended purpose. Respective safety regulations issued by the VDE, the states,
their control authorities, the TÜV and the local energy supply company must be observed.
- The buyer has to adhere to the building and safety regulations and has to prevent all perils of any kind.
- No warranties or liabilities whatsoever will be assumed for defects and damages arising from improper use of this device.
- Consequential damages caused by a fault in this device are excluded from any warranty and ⁄ or liability.
- These devices must be installed by authorized qualified personnel only.
- The technical data and connecting conditions of the mounting and operating instructions delivered together with the device are
exclusively valid. Deviations from the catalogue representation are not explicitly mentioned and are possible in terms of technical
progress and continuous improvement of our products.
- In case of any modifications made at the devices by the user, all warranty claims are forfeited.
- This device must not be installed close to heat sources (e.g. radiators) or be exposed to their heat flow. Direct sun irradiation or heat
irradiation by similar sources (powerful lamps, halogen spotlights) must absolutely be avoided.
- Operating this device close to other devices that do not comply with EMC directives may influence its functionality.
- This device must not be used for monitoring applications, which solely serve the purpose of protecting persons against hazards or
injury, or as an EMERGENCY STOP switch for systems or machinery, or for any other similar safety-relevant purposes.
- Dimensions of enclosures or enclosure accessories may show slight tolerances on the specifications provided in these instructions.
- Modifications of these records are not permitted.
- In case of a complaint, only complete devices returned in original packing will be accepted.
Our "General Terms and Conditions of Sale and Delivery" together with the "General Conditions for the Supply of Products and Services
of the Electrical anElectronics Industry" (ZVEI conditions) including the supplementary clause "Extended Retention of Title" solely apply as
the exclusive terms and conditions.
© Copyright by S+S Regeltechnik GmbH · Reprints, in part or in total, are only permitted with the approval of S+S Regeltechnik GmbH.
8