SPORT-TRANSFER 10 019 Operator's manual

1
SPORT-TRANSFER sp. z o.o.
Jawornik 564
32-400 Myślenice
Tel. [phone]
e-mail: [e-mail]
INSTRUCTIONS FOR ASSEMBLY AND USE OF SPORTS EQUIPMENT
Product:
Foldable basketball structure
Code: 10 019 and 10 025
The basketball structure meets the requirements of the PN-EN 1270 standard: Playing Field Equipment -
Basketball Equipment. Functional And Safety Requirements, Test Methods”.
1.
Components
Number Part/subassembly name
Quantity per
product
1
Structure frame
1
2
Structure arms
2
3
Beam fastening the board to the structure
2
4
Diagonal of the structure
1
5
Diagonal lock
1
6
Screw M12x60
8
7
Self-locking nut M12
8
8
Screw M10x45
4
9
Self-locking nut M10
4
10
Washer widened M10
8
11
Pulling handle
2

2
2.
Assembly of the basketball structure
Assembly of the structure must be carried out by a specialist company.
-Attach the frame (1) to the wall in the sports hall at the appropriate height at 13 fixing points.
-It is recommended to select appropriate elements for fixing the structure to the wall, depending on the
wall structure.
-Horizontal force acting on a fixed frame equal to F=900 N or vertical force equal to F=3200 N should not
cause the frame mountings to loosen in the wall.
-Connect the arms (2) to the frame (1) using M12x60 screws (6) and M12 self-locking nuts (7).
-Fix to the arms (2) beams fixing the table to the structure (3) using M12x60 (6) bolts and M12 self-
contracting nuts (7).
-Fix the diagonal (4) (as in the picture) in the lower part of the arms (2) using M12x60 bolts (6) and M12
self-locking nuts (7).
-Fix the plate to the beams (3) using M10x45 bolts (8), M10 washers (10) and M10 self-locking nuts (9).
-Position the structure so that the arms (2) are perpendicular to the frame of the structure (1).
-In the diagonal (4) in place of lock (5) make a hole of 10mm diameter for the diagonal lock, the same
action should be repeated after folding the structure on the wall.
-Insert the diagonal lock (5).

3
3.
Folding in and out of the structure
-Place the first extraction handle (11) on the diagonal lock eye (5) and unlock the mechanism.
-Place the second pulling handle over the eye of the structure arm (2) and fold the structure towards the
wall in a steady motion.
-Proceed in the same way when disassembling the structure.
Attention:
Do not fold and unfold the structure pulling the eye of the lock (5)
4.
Using the set
a) The structure is designed exclusively for basketball play and cannot be used for any other purpose.
b) Before starting to use and periodically (max. every 3 months) it is necessary to check the fastenings of all
individual elements of the set.
ATTENTION:
Do not climb or hang on any part of the structure.