SPORTS ART ICARE E872M User manual

Sports Art Industrial Co., Ltd. TUV-CERT ISO 9001/9002 Certied Quality Products 2012.11.28
ICARE E872M
Body Weight Support System Platform’s Manual

ICARE E872MP OWNER’S MANUAL CONTENTS
1. INTRODUCTION ...............................................................................2
2. SAFETY PRECAUTIONS .................................................................3
3. LIST OF PARTS ................................................................................4
4. ASSEMBLE THE PRODUCT ............................................................5

2
1. INTRODUCTION
Congratulations on your purchase of the SportsArt ICARE E872MP Body
Weight Support System Platform. Made through a partnership between
Madonna ICARE and SportsArt Fitness, this product was built specically
for physical rehabilitation.
Before this product is assembled or operated, we recommend that you famil-
iarize yourself with this manual. Understanding the correct methods of assembly
and operation will help ensure that exercisers obtain their goals safely and
successfully.

3
2. SAfETy PRECAUTIONS
Safety was an important consideration in the design of the SportsArt Fitness
ICARE E872MP Body Weight Support System Platform. However, during the use
of the physical rehabilitation elliptical trainer and the Body Weight Support System
Platform, you must pay careful attention to the safety.
●For safety, operate this product only as instructed, and install only SportsArt parts
onto this product.
●Assemble the Body Weight Support System Platform on a solid, level surface;
DO NOT use it outdoors or near water.
●Check the Body Weight Support System Platform before every use. Make sure
all parts are assembled, and all fasteners are tightened. DO NOT use the Body
Weight Support System Platform if the unit is not fully assembled.
●If this product is damaged in any way, stop operating it. If this product has
any issue or is broken, notify the SportsArt service department.
● DO NOT use accessories or parts that are not specically recommended
by the manufacturer. Such parts might cause injuries or cause the unit to
fail.
●All users must be supervised at all times while using this product.
●Children should never be allowed to play on or near the product.

4
3. LIST Of PARTS
PART # DESCRIPTION QTY
IC02-001 4" Leg 4
IC02-002 8" Leg 15
IC02-003 18" Leg 8
IC02-007 Toe Guard 2
IC02-201 Full Platform Section 4
IC02-202 Clinician Platform 2
IC02-203 Platform Ramp 2
IC02-204 Half Platform Section 2
IC1042 1/4-20 x 5/8" Carriage Bolt, Zinc 57
IC1043 1/4-20 Nylock Nut 57
IC1073 Leg Cap 27
IC02-002
IC02-101
IC02-007
IC02-201
IC02-203
IC02-202
IC02-201
IC02-003
IC1073

5
4. ASSEMBLE THE PRODUCT
(a). Lay the platforms face down and organize them into groups as shown
below.
(b). Identify the proper legs and place them in the appropriate corners as
shown.
(c). Insert the bolts from the outside; tighten the nuts from the inside. In some
instances the bolt will go through two platforms and then a leg.
(d). Platforms that require toe guard will need to be lifted slightly to connect
toe guards properly.
IC1042
57X
18" LEG
IC02-003
8x
IC02-202
USE 3x - 18" LEGS
IC02-201
USE 2x - 8" LEGS
IC02-201
USE 2x - 8" LEGS
IC02-201
USE 2x - 8" LEGS
IC02-203
USE 1x - 8" LEGS
IC02-203
USE 2x - 8" LEGS
IC02-204
USE 4x - 4" LEGS IC02-204
USE 2x - 8" LEGS
IC02-201
USE 4x - 8" LEGS
IC1042
IC1043 TOE GUARDS -
Must lift platform to bolt properly
IC1043
57X
IC02-202
USE 5x - 18" LEGS
8"LEG
IC02-002
15x
4" LEG
IC02-001
4x