SportsPlay 802-176 User manual

2'-0"
*IMPORTANT*
*IMPORTANT**IMPORTANT*
*IMPORTANT*
6
7
2
3
DETAIL B
DETAIL BDETAIL B
DETAIL B
4
Please retain t is instructions s eet in your files. It contains important
maintenance instructions, as well as replacement parts information.
ITEM NO. PART
NUMBER DESCRIPTION QTY.
1 803-268 Spacer Bar 1
2 803-267 End Support 2
3 803-328 Ladder 1
4 116-514 5/16" x 3-1/2" Hex Bolt 2
5 116-510 5/16" x 2-1/2" Hex Bolt 8
6 226-501 5/16" Lock Nut 10
7 326-501 5/16" Lock Was er 10
8 105-015 1-5/8" Pipe Plug 8
9 415-515 T-Clamp 4pr.
SINGLE SIDE BIKE RACK (Port)
SINGLE SIDE BIKE RACK (Port)SINGLE SIDE BIKE RACK (Port)
SINGLE SIDE BIKE RACK (Port)
54321
802-176
802-176802-176
802-176
6
7983
2
6
7
8
5
9
5
DETAIL A
DETAIL ADETAIL A
DETAIL A
A
AA
A
B
BB
B
2
8
9
3
1
C
CC
C
S eet 1 of 2
S eet 1 of 2S eet 1 of 2
S eet 1 of 2
10'-3" 2'-6"

802-176
802-176802-176
802-176
facilitate water drainage.
54321
SINGLE SIDE BIKE R CK (Port)
SINGLE SIDE BIKE R CK (Port)SINGLE SIDE BIKE R CK (Port)
SINGLE SIDE BIKE R CK (Port)
Tighten and/or replace immediatly.
On products with platforms install 1 - 2 degrees off level to
GENER L SSEMBLY INSTRUCTIONS:
GENER L SSEMBLY INSTRUCTIONS:GENER L SSEMBLY INSTRUCTIONS:
GENER L SSEMBLY INSTRUCTIONS:
GENER L M INTEN NCE INSTRUCTIONS:
GENER L M INTEN NCE INSTRUCTIONS:GENER L M INTEN NCE INSTRUCTIONS:
GENER L M INTEN NCE INSTRUCTIONS:
SPECIFIC SSEMBLY INSTRUCTIONS:
SPECIFIC SSEMBLY INSTRUCTIONS:SPECIFIC SSEMBLY INSTRUCTIONS:
SPECIFIC SSEMBLY INSTRUCTIONS:
Check all the parts and hardware with the packing list to be sure you
have received everything needed to assemble this product.
CONT CT YOU LOC L DISTRIBUTOR WITH NOTIFIC TION OF
NY MISSING OR D M GED P RTS. Contact must be made with-
in ten days of receipt of your order.
Only hand tighten nuts & bolts on initial assembly. Final tightening
should be done EVENLY after final assembly when unit has been
plumbed and leveled.
fter assembly is complete, NY ENDS OF BOLTS PROTRUDING
BEYOND NUTS SHOULD BE CUT OFF/OR PEENED OVER TO
REMOVE NY SH RP PROJECTIONS. Go over entire unit to file
smooth any sharp edges or projections that may have been caused
by rough handling in shipping or installation. T-Clamps are designed
for both one and two bolt connections. In many situations only one
bolt is required. See specific assembly instruction.
Check MONTHLY for loose bolts, damaged or broken parts.
Completely assemble Bike Rack.