Spracht ZuM Maestro BT User manual

ZūM Maestro BT™
ZūM Maestro BT™Headset
Bluetooth® Headset with Noise Canceling Microphone
USER GUIDE
English Only

Spracht®
Warranty
Spracht warrants its products against defects or malfunctions in material and workmanship
under normal use and service, with the exceptions stated below. This warranty lasts for
one year from the original date of purchase. Coverage terminates if you sell or otherwise
transfer the product. In order to keep this warranty in eect, the product must have been
handled and used as prescribed in the instructions accompanying the product. Spracht
shall (at its option) repair or replace a defective unit covered by this warranty, or shall
refund the product purchase price. Repair, replacement with a new or reconditioned unit, or
refund, as provided under this warranty, is your exclusive remedy. This warranty does not
cover any damages due to accident, misuse, abuse, or negligence. Spracht shall not be
liable for any incidental or consequential damages. Some states do not allow limitation or
exclusion of incidental or consequential damages, so the above limitation or exclusion may
not apply to you. Implied warranties of merchantability and fitness for a particular purpose
are limited in duration to the duration of this warranty. Some states do not allow limita-
tions on how long an implied warranty lasts, so the above limitation may not apply to you.
To make a warranty claim, the purchaser must obtain a return authorization number (RA)
from Spracht (serial number and purchase date required), and then return the product to
Spracht at purchaser’s expense. A copy of the original dated receipt or shipping document
must accompany the product. To obtain a return authorization, see Warranty on our web-
site www.spracht.com, e-mail [email protected], or contact us at:
Spracht
974 Commercial Street, Suite 108
Palo Alto, CA 94303 USA
Tel.: [phone] Fax: [phone]
For repair or replacement of a failed product, allow 4 to 6 weeks for processing
and shipment. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
i

ZūM Maestro BT™
Contents
Warranty
Package Contents
Charging the Headset
Setup
Pairing with a Bluetooth® Device
Using the Headset
Answering a Call
Ending a Call
Microphone Mute
Volume Adjustment
Zum Maestro BT™ Base Features
Features
Buttons and LEDs
Specifications
Headset Battery
Important Safety Instructions
FCC Declaration
Certifications
i
iii
1
1
2
2
2
2
2
3
4
4
5
5-6
6
ii

Spracht®
Package Contents
Headset
➊ Mic Mute
➋ Headset Volume Up
➌ Noise Canceling Microphone
➍ Headset Status LED
➎ Multiple Function Button
➏ Headset Volume Down
Base
➐ Charging Contacts
➑ Power Adapter Jack
➒ USB Port - for charging phone
or connecting to Mac or PC
for skype
Power Adapter
➊
➏
➎
➍
➋
➌
➐
➑➒
iii

ZūM Maestro BT™
Charging the Headset
Before you can use your headset, you must charge it. Plug the AC Adapter into
the base and a wall outlet. Place the headset in the base to charge it; the red LED
will be on. The LED will switch to green once charging is complete. If you take
the headset o the base it will go into stand-by mode. If no pairing is active, the
headset will shut down to preserve the charge in the battery.
Setup
Pairing with a Bluetooth® Device
First, make sure that our device, smart phone or Mac/PC, has Bluetooth®
functionality. Activate the Bluetooth® function on your device.
Turn on your headset
1. Press the Multi-Function button for at least 6 seconds (for location of the but-
ton, see item 5 on the diagram opposite). The LED (item 4) will alternately flash
red and blue, which indicates the headset is in pairing mode.
2. On your device, search for Bluetooth® devices. You should see ZūMBT when
you select Discover or Add on your device. Select ZūMBT to begin pairing. You
may need to enter the PIN code “0000” if your device requests it.
3. When the pairing is successful, the LED will turn solid blue and the ZūMBT™
icon will show on your device. You can make calls, listen to music, or use it
for Skype™. You should not have to pair again: you can reconnect by pressing
the icon.
4. If pairing did not succeed, turn the headset OFF,and repeat steps 13.
1

Spracht®
5. Zum Maestro BT™ can pair with 2 devices simultaneously. To begin, turn o the
Bluetooth® function on your first device.
• Power the headset OFF.
• Repeat steps 1-3 on the second device.
• When pairing is successful, turn on the Bluetooth® function on your first
device. You are now paired to 2 devices.
6. If no device is paired within 120 seconds of beginning pairing mode, the
headset will shut down to save power.
Using the Headset
Answering a Call
After you have successfully paired the headset with your device, the headset will
ring when there is an incoming call. Press the Multifunction Button (item 5 on the
image on page iii) to answer it.
Ending a Call
Press the Multifunction Button again to end a call.
Microphone Mute
During a call, a short press of the Mute Button (item 1 on page iii) will mute the
Microphone. Another short press of the Mute Button will turn the Microphone
back on.
Volume Adjustment
A short click of the Volume Down button (item 6 on page iii) will reduce the vol-
ume level in your headset, while a short click of the Volume Up button (item 2 on
page i) will increase the volume in your headset.
2

ZūM Maestro BT™
Zum Maestro BT™ Base Features
The Zum Maestro BT™ base has a USB port that can be used to charge your
smart phone. You can also connect to your Mac/PC via USB for such apps as
Skype if you don’t want to use the Bluetooth® function.
Features
1. Multi-Function Button (item 5 on page iii)
• Power On/Power O 3 sec press & hold
• Pairing 6 sec press & hold
• Answer a call short press
• End a call short press
2. Headset Volume (item 2 & 6 on page iii)
• Volume Down (item 2) click
• Volume Up (item 6) click
3. Headset Microphone Mute (item 1 on page iii)
• Mute On press
• Mute O (Mic back on) press
4. Headset LEDs (item 4 on page iii)
• Power On Blue LED flashes 4 times (300ms on, 300ms o)
• Power O Red LED flashes once (2s)
• Pairing Mode Blue LED and Red LED flash alternately (red
750ms on, blue 750ms on)
• Pairing Successful Blue LED flashes (300ms on, 8s o)
• Answer Call or Play Music Blue LED flashes (300ms on, 8s o)
• Charging Red LED on
• Charging Complete Blue LED on
3

Spracht®
Specifications
• Wideband audio for exceptional sound quality.
• Volume and mute controls
• Advanced hearing protection cuts o sudden loud volumes
• Bluetooth® Version: V3.0 backward compatible
• Advanced Multipoints
• Profile: Headset: 1.1 Hands-free: 1.5 A2DP
• Microphone with noise cancellation
• Crystal clear sound and voice (DSP)
• Distance: up to 33’ (10m)
• Talk time: 21 hours from 300mAh battery
• Stand by time: 500 hours
• Working environment: 32° to 104° F (0° to +40° C); up to 95% relative humidity
non-condensing.
• Visual indicators: LED indicates call status, pairing status, and others.
• Beep: indicates volume level, microphone mute, and others.
• Sound: Mic Noise canceling, sixth generation echo cancellation, tone control
• Charging: ZūM Maestro BT™ charges when docked in base.
Headset Battery
Battery type: Lithium-ion polymer.
Battery capacity: 300 mA per hour standard.
Battery talk time: Up to 21 hours.
Battery life: Minimum recharging 1000 times.
Battery standby time: At least 500 hours.
Operating temperature range: -20 °C to +60 °C.
Battery charging time: Less than 60 minutes to charge 20%. Less than 90
minutes to charge 50%. Fully charged in less than 3.5 hours.
Battery storage life: Before first charge, if the headset is turned o, it will retain
power for six months.
4

ZūM Maestro BT™
Important Safety Instructions
• Use only the power cord and battery indicated in this manual.
• Do not dispose of batteries in a fire. They may explode.
• Check with local codes for disposal and/or recycling instructions.
FCC Declaration
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this equipment not expressly approved by
Spracht could void your warranty and your ability to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocated the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
5

Spracht®
RF Warning Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
Certifications
6