SPRI Push-Up Bars User manual

Push-Up Bars
Assembly Instructions
Step 1:
Each Push-Up Bars
consists of (1) curved
hand bar, (2) straight
legs, and (2) hand
screws.
Step 2:
Insert (1) leg into each
end of hand bar and
align screw holes.
NOTE! Legs
are positioned
perpendicular to hand
bar.
Step 3:
Insert (1) hand screw into each
of the screw holes located at
the lower, inside portion of
each side of the bar and hand
tighten.
Step 4:
Before each exercise
session, grasp top of
each Push-Up Bars and
apply direct downward
pressure. Tighten hand
screws if any bar
instability is noted.
Consult your physician
before beginning any type
of exercise program.
Push Up Bar_IS_R2.indd 1 8/17/11 11:42 AM

Call our toll-free number or visit our website
for more information on SPRI products
or to receive your SPRI catalog.
SPRI Products
1769 Northwind Blvd. Libertyville, IL 60048
800-222-7774 – www.spri.com
The leading manufacturer and
distributor of health, tness and
wellness exercise products
SPRI Products, Inc. Libertyville, Illinois 60048
SPRI is a registered trademark of SPRI Products, Inc.
©2011 SPRI Products PL-PUB-C / v.2009
SPRI (A Gaiam Company) assumes no liability or responsibility for
accidents or injury to person or property that may result from the
improper use of this product. Be sure to consult your health professional
before beginning these exercises or any type of exercise program.
Push-Up Bars
Assembly Instructions
Push Up Bar_IS_R2.indd 2 8/17/11 11:42 AM