Spring 2585-6A User manual

The Evolution of Intelligent Design®
Dec 2017
Model: 2585-6A
The Evolution of Intelligent Design®

Before You Begin
To ensure safe operation, read the following instructions in their
entirety.
Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the
warning is ignored.
Caution is used to indicate the presence of a hazard that will or can
cause minor personal injury or property damage if the caution is
ignored.
NOTICE
Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
•Equipment should only be used in a flat, level position.
•Do not obstruct or cover the equipment in any way when in use.
•Do not store or place any materials below the equipment when in
use.
•Always turn off and unplug electric heating elements when not in
use.
•Always allow equipment to cool before handling.
•Do not operate without water in the water pan.
•Do not operate unattended.
•Closely supervise equipment operating in public areas and/or around
children.
•Do not operate if equipment has been damaged or is malfunctioning
in any way.
27
Service & Repair
Never attempt to service any part of The Countertop Chafing Dish with
heating element. Attempting to service on your own, or through an
unauthorized repair facility, automatically voids your warranty. Contact
our Service Department at 630-527-8600. For service forms, visit the
Spring USA website.
Warranty
Spring USA’s Countertop Chafing Dish with heating element carries a ten-
year warranty against manufacturing defects on welds and metal
castings. Warranty does not cover abuse or normal wear and tear.
Maintenance Cont’d.
Clean the electric heating element with a slightly moistened cloth only.
Over time, mineral deposits may accumulate within the water pan.
Remove with de-liming solution. Follow the manufacturer’s instructions
for removal of mineral deposits from stainless steel surfaces.
If axles begin to squeak when opening the cover, apply cooking spray or
vegetable oil directly on the axle to lubricate the components. Wipe off
an excess oil. Never use WD-40 to lubricate the axle.
Electrical Shock Hazard. Liquids inside the heating element
can cause electrical shock. Never immerse the element in
water. Never carry the heating element by the cord.

Maintenance
The Countertop Chafing Dish with heating element should be cleaned
after every use to maintain the appearance and prolong the life of the
equipment.
Parts suitable for cleaning in a commercial dishwasher:
The frame and cover may be cleaned with warm, soapy water. Never use
abrasive materials or scouring pads. Never immerse the frame in water.
Thoroughly wipe off any mild soap. If needed, polish with stainless steel
cleaner or glass cleaner without ammonia.
6
Disassembly
When finished serving food:
1. Unplug the electric heating element.
2. Open the cover, remove the food pan and allow time for the water
and heating element to cool down before handling.
3. Once cooled, remove the heating element from beneath the water
pan by first twisting the bolts counter-clockwise.
4. Slide the heating element in the corresponding direction that aligns
the bolts with the bolt hole openings on the heat element.
5. The heating element will no longer be secured to the bottom of the
water pan and can be pulled straight down to remove.
6. Close the cover. Pull the cover straight up to remove.
7. Remove the water pan from the stand by pulling it straight up.
Empty the water from the pan after every service.
Burn Hazard. Follow the disassembly instructions prior to
cleaning.
•Food pan
•Water pan
3
Installation
Inspect all parts of the Countertop Chafing Dish with heating element
prior to installation. If the unit is damaged, do not use. Contact a
supplier for a replacement. To use the chafing dish, first place the unit
on a flat, level surface and attach the electric heating element.
To attach Spring USA’s electric heating element for rectangular chafing
dishes, model #9517, align the bolt holes on the element with the bolts
located on the underside of the water pan. The flat side of the heating
element should be touching the underside of the water pan. See Figure
1 for reference.
Slide the heating element in the corresponding direction that aligns the
bolts with the narrow slots on the element. See Figure 2 for reference.
Function
Spring USA’s Countertop Chafing Dish with heating element is intended
for serving prepared food. It has been designed specifically to keep food
warm. Food must be at or above serving temperature before being
placed in the chafing dish.
NOTICE: The Countertop Chafing Dish only maintains
temperature –it does not cook or continue to cook food.
Figure 1. Electric Heating Element, Flat Side Down
Figure 2. Electric Heating Element, Mounted Alignment

45
How to Operate
1. Open the cover and remove the food pan from the water pan.
2. Pour clean, hot water (140°F-180°F) into the water pan to the fill
line stamped on the backside of the pan.
3. Plug in the electric heating element. The element will automatically
start to heat.
4. Place the food pan containing prepared food into the water pan and
close the cover.
5. Regularly monitor the food temperature and water level in the
water pan. Food should remain above 140°F. Water should not fall
below the fill line. If needed, refill the water pan with hot water.
NOTICE: The water pan will warp if allowed to run dry
for an extended period of time. A warped water pan will
cause poor contact with the heating element and limit
heat transfer to the pan.
Dimensions
Weight: 32 lb. (14.5 kg)
Capacity: 9.875 qt. (0.95 L)
Height:
15.0”
(381 mm)
Depth:
16.8”
(426 mm)
Width:
26.0”
(660 mm)
Installation Cont’d.
Tightly fasten the bolts so the heating element is in direct contact with
the water pan and there is no gap between the parts. Run the heating
element cord through the holder located underneath the frame on
either side of the chafing dish. See Figure 3 for reference.
Figure 3. Electric Heating Element Cord in Holder
NOTICE: For ambient temperature water, allow one hour
for pre-heating with the cover closed and the heating
element on.
Burn Hazard. Hot food, surfaces, steam and liquid can burn
skin. Allow time for cooling before servicing.
Electrical Shock Hazard. Liquids inside the heating element
can cause electrical shock. Do not use a damaged power
cord.