sprogs SPG-122181 User manual

SPG-122181 ASSEMBLY INSTRUCTIONS
For assistance, call: Customer Service 1-866-619-3458
Parts:
Hardware:
(4) Hex
Screws
(2) Allen wrenches
Table
(4) Hex Caps
(2) Legs
Step 1: Assemble Legs to-
gether by sliding the cutout of
one into the cutout of another.
Sides of legs with holes should
be the higher hoizontal edge for
the next step.

Step 4: Tighten down all
screws snugly. Assembly is
now complete. DO NOT
OVER-TIGHTEN. DO NOT
DRILL.
Step 3: Attach Table Top to Leg
Assembly using Hex Screws
from supplied hardware. Align
slots in cleats with holes in leg as-
sembly and insert screw. Hand
tighten screw into Hex Cap in-
serted from other side. Continue
repeatingStep 3 until all four
cleata are attached to the leg as-
sembly with hex screws and
caps.
Step 2: Place Table on top of
leg assembly. Align dados in
underside of Table with edges
of leg pieces. Sides of legs
with holes should be closest to
the underside of table. Do not
attempt to move cleats on un-
derside of table.
For assistance, call: Customer Service 1-866-619-3458