U-Line H-2058 User manual

PAGE 1 OF 5 0714 IH-2058
πH-2058
cabinet
sHop desk
1-800-295-5510
uline.com
PARTS
TOOLS NEEDED
Phillips Screwdriver
10 mm Wrench
7 mm Wrench
8 mm Wrench
Small Bolt x 4
Medium Bolt x 8
Large Bolt x 61
Front Leg x 2 Back Leg x 2
Left Door x 1 Right Door x 1 Bottom Shelf x 1
Desk Top x 1
Lock Bar x 1Middle Shelf x 1
Small Nut x 4
Medium Nut x 8
Large Nut x 59 Front Channel x 1
Back Panel x 1 Side Panel x 2
Top Shelf x 1
Small Washer x 4
Medium Washer x 8
Drawer Track x 2
Small Lock Washer x 4
Medium Lock Washer x 8
Drawer Lock x 1
Door Handle With Lock x 1
Drawer x 1

PAGE 2 OF 5 0714 IH-2058
LEG ASSEMBLY
1. Place desk top on a smooth, non-marring surface
with top side facing down.
2. Attach front legs using 4 large bolts and 4 large nuts
on each leg. (See Figure 1) Attach back legs using 4
large bolts and 4 large nuts on each leg.
NOTE: Door hinges must face inward when
attaching front legs.
DRAWER ASSEMBLY
1. Remove drawer slides from the outsides of the
drawer. Press the drawer slide release lever to
remove slides completely. (See Figure 2)
NOTE: Depending on the side, press release
lever either down or up to remove slides.
2. Attach drawer slides to drawer tracks using 2 small
bolts, washers, lock washers and nuts. Extend drawer
slide completely to attach to track. Insert center bolt
first to align front bolt hole. (See Figure 3)
ASSEMBLY
Figure 1
Figure 2
Figure 3
RELEASE LEVER
DRAWER TRACK

PAGE 3 OF 5 0714 IH-2058
ASSEMBLY CONTINUED
3. Insert drawer tracks into inside of desk top, aligning
front and back bolt holes. Drawer slides must
face inward. Use 4 large bolts and 4 large nuts to
assemble each drawer track to the desk top.
(See Figure 4)
NOTE: Lip should face the bottom of desk
CABINET ASSEMBLY
1. Attach front channel with 2 large bolts. (See Figure 5)
NOTE: Hole must be to the left of center.
2. Attach side panel with 6 large bolts and 6 large nuts.
Lip must face towards desk top. (See Figure 6
3. Repeat for other side panel and back panel.
NOTE: Wait to install top bolts.
4. Install middle shelf at desired height with 4 large
nuts and 4 large bolts. Lip must face towards front of
desk.
Figure 5
Figure 4
Figure 6

PAGE 4 OF 5 0714 IH-2058
5. Install bottom shelf with 9 large nuts and 9 large
bolts. Lip must face towards front of desk.
(See Figure 7)
6. Set desk top assembly upright and recheck all bolts
and nuts for tightness.
7. Flip door hinges inward. Attach left door to hinges
using 4 medium bolts, washers, lock washers and
nuts. Repeat for the right door. (See Figure 8)
8. Disassemble door handle. Reassemble door handle
with lock bars. (See Figure 9)
NOTE: Longer rod on lock bars must point down.
Figure 8
Figure 9
Figure 7
ASSEMBLY CONTINUED
LIP

PAGE 5 OF 5 0714 IH-2058
TOP SHELF ASSEMBLY
1. Set desk top assembly upright and recheck all bolts
and nuts for tightness.
2. Place top shelf on desk top and assemble with 6
large bolts and 6 large nuts. (See Figure 10)
3. Insert drawer into desk top.
LOCK ASSEMBLY
1. Disassemble drawer lock and reassemble lock on
drawer. (See Figure 11)
ASSEMBLY CONTINUED
Figure 10
Fig ur e 11
π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com