FURNITUREBOX TEO User manual

TEO
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/teo
SCAN ME

Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
SAFETY AND CARE ADVICE
• Check you have all the components and tools listed.
• Remove all ttings from the plastic bags and separate
them into their groups.
• We do not recommend the use of power drills/drivers
for inserting screws, as this could damage the unit.
Only use hand screwdrivers and Allen keys.
• Keep children and animals away from the work area,
small parts could cause choking if swallowed.
• Make sure you have enough space to layout the parts
before starting.
• Assemble the item as close to its nal position (in the
same room) as possible.
• Do not overtighten the nuts to avoid causing damage
to the threads.
• Only clean using a soft dry cloth to remove dust. Use
a wood cleaner / protection agent to remove dirt and
grime, and restore the sheen to the wood nish. Do
NOT use bleach or abrasive cleaners.
• Harsh chemicals should not be used to clean wooden
furniture. Using chemicals can damage the nish and
cause color differences in the wood.
• From time to time check that there
are no loose screws on this unit
• Keep out of direct sunlight to avoid
sun and light damage and colour
bleaching
• Keep away from direct heating and
cooling surfaces as this can affect
the moisture content of the wood.
• Do not drag wooden furniture.
Always lift the item to avoid
scratches to ooring as well as
damage to the furniture legs.
• Always use coasters underneath
hot objects to keep from getting
white rings or spots in the nish.
• This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre
• Keep sharp or pointed items
away from the furniture to avoid
scratches.

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
10 MINUTE
BUILD
MAXIMUM
CAPACITY 100Kg
2 PERSON
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 1
Assemble on a clean, at soft surface to avoid any bumps or
scratches. Note that this piece features solid wood, and so will be
quite heavy. Please lift and move it carefully, always with help, to
avoid any injuries.
Place coffee table top [A] upside down on at surface. Align both
legs [B] with the pre-drilled holes.
Attach the legs using 1 x washer [E] followed by 1 x screw [D] for
each hole - 3 per leg, 6 in total. Tighten using Allen key [F].

www.furniturebox.co.uk
FULL ASSEMBLY INSTRUCTIONS
STEP 3
Carefully and with help turn your coffee table over onto
its feet. Check stability. Your new coffee table is ready to
use.
STEP 2
Attach the drawer
knob [C] by screwing 1
x screw [G} in from the
inside of the drawer,
and screwing on 1 x
drawer knob [C] onto
the exposed end of the
screw on the outside of
the drawer.

www.furniturebox.co.uk
www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.