Sprout Kids Rocker KR001 User manual

Kids Rocker
Assembly Guide
Rocker Back
(HZ1010RKR)
Seat
(HZ1010)
Brace
(HZ1010BRC)
Rocker Sides
(KRSD)
www.sprout-kids.com
Product Code: KR001
TM
Quark Enterprises, LLC ASI-KR
Made in the USA
Visit www.sprout-kids.com/mysprout
to register your product, and be the
first to hear about new colors, styles,
and products from Sprout.
For ages 3-7
Not for outdoor use
Assemble and Disassemble
Under Adult Supervision
Sprout products include a 30 day major defect
warranty. Sprout reserves the right to replace
the either the entire product or the defective
components or refund the purchase. This
warranty covers only damage due to normal
use. The warranty does not include damage
due to intentional damage, abuse, abnormal
use, immersion in water, outdoor use, or
unreasonable exposure. Claims should be
directed to the reseller.
Dimensions: 21" H x 12" W x 20" D
Weight Limit: 150 lbs

1
2
3
4
Lay one rocker side on the
ground. Place the brace,
seat, and back in place.
a
b
c
Place the other side in place.
Stand the rocker upright.
Push down on the chair back
to set it in place.
Tilt the rocker back and press
the seat and brace in place.
5
Rock Out!
(to take the rocker apart, just flip it over and push
down on the seat, brace, and back to release them