Sprout SOUNDWAVE PRO User manual

SOUNDWAVE PRO
BLUETOOTH
SPEAKER
PRODUCT MANUAL

01. What’s in the box? 2
02. Product overview 3
03. Quick star guide 4
04. Operating controls 7
05. Specifications 10
06. Imporant safety info 11
07. Consumer guarantee 12
CONTENTS
Scan the QR code
to access an online
version of this manual
WE PUT MORE INTO
OUR TECH, SO YOU CAN
GET MORE OUT OF LIFE.
At Sprout, our purpose is to help
you unlock the potential of your
technology. We’re an Australian
brand, and we design all of our
products locally to ensure they
are uniquely suited to your lifestyle.
1

01. What’s in the box? 2
02. Product overview 3
03. Quick star guide 4
04. Operating controls 7
05. Specifications 10
06. Imporant safety info 11
07. Consumer guarantee 12
CONTENTS
Scan the QR code
to access an online
version of this manual
WE PUT MORE INTO
OUR TECH, SO YOU CAN
GET MORE OUT OF LIFE.
At Sprout, our purpose is to help
you unlock the potential of your
technology. We’re an Australian
brand, and we design all of our
products locally to ensure they
are uniquely suited to your lifestyle.
1

1. WHAT’S IN THE BOX?
Thank you for choosing the Soundwave Pro
Bluetooth Speaker by Sprout.
For optimum perormance and safety, please
read instructions carefully before usage.
Please keep this manual for future reference.
1x Soundwave Pro speaker
1x USB-A to USB-C charging cable
1x Product manual
1. LED indicator
2. Power buton
3. Play buton
4. Volume up buton
5. Volume down buton
6. UNISYNCTM buton
7. LED batery indicator
8. 3.5mm aux input por
9. USB-A output por
10. USB-C input por
2. PRODUCT OVERVIEW
1
7
2
3
8
9
10
4
5
6
32

1. WHAT’S IN THE BOX?
Thank you for choosing the Soundwave Pro
Bluetooth Speaker by Sprout.
For optimum perormance and safety, please
read instructions carefully before usage.
Please keep this manual for future reference.
1x Soundwave Pro speaker
1x USB-A to USB-C charging cable
1x Product manual
1. LED indicator
2. Power buton
3. Play buton
4. Volume up buton
5. Volume down buton
6. UNISYNCTM buton
7. LED batery indicator
8. 3.5mm aux input por
9. USB-A output por
10. USB-C input por
2. PRODUCT OVERVIEW
1
7
2
3
8
9
10
4
5
6
32

TURNING SOUNDWAVE PRO ON/OFF
To power on, long press the power buton for 2
seconds. Soundwave Pro will announce “power on”
whilst the LED indicator light at the top will light up.
It will flash blue/red until a Bluetooth connection
has been established.
To power of, long press the power buton for 2
seconds. The speaker will announce “power of”
with the LED indicator also turning of.
To preserve batery, Soundwave Pro will
automatically turn of afer 5 minutes of no Bluetooth
or 3.5mm aux connection.
CONNECTING VIA 3.5MM AUX CABLE
To play audio using the aux cable, connect the cable
from the Soundwave Pro to your device. The LED
indicator light will change to a solid red. Soundwave Pro
will play the audio when you press ‘play’ on your device.
Please note: Using 3.5mm aux input will override a
Bluetooth source input.
CONNECTING VIA BLUETOOTH
1. Press the power buton for approximately two
seconds. The LED indicator light will flash blue and
red to indicate Soundwave Pro is ready for pairing*
2. Turn on Bluetooth on your mobile phone/
music device**
3. ’Soundwave Pro’ will appear on your mobile
phone/music device. Select ‘Soundwave Pro’
to pair
4. Once your mobile phone/music device is
connected to the Soundwave Pro speaker,
the LED indicator light will change to a solid
blue, and the speaker will announce “Bluetooth
connected”***
5. Enjoy your music
*Soundwave Pro will automatically enter Bluetooth pairing
mode when turned on for the first time. To reset Bluetooth
pairing, hold the UNISYNC buton for 6 seconds to forget all
devices and initiate Bluetooth pairing mode again.
**If you are not familiar with Bluetooth pairing for your mobile
phone or music device, refer to the user guide for your mobile
phone/music device for instructions to pair a new device
using Bluetooth.
***Soundwave Pro will always store the last device paired
and if the device is within Bluetooth range, Soundwave Pro
will automatically connect to the device.
3. QUICK START GUIDE 3. QUICK START GUIDE
54

TURNING SOUNDWAVE PRO ON/OFF
To power on, long press the power buton for 2
seconds. Soundwave Pro will announce “power on”
whilst the LED indicator light at the top will light up.
It will flash blue/red until a Bluetooth connection
has been established.
To power of, long press the power buton for 2
seconds. The speaker will announce “power of”
with the LED indicator also turning of.
To preserve batery, Soundwave Pro will
automatically turn of afer 5 minutes of no Bluetooth
or 3.5mm aux connection.
CONNECTING VIA 3.5MM AUX CABLE
To play audio using the aux cable, connect the cable
from the Soundwave Pro to your device. The LED
indicator light will change to a solid red. Soundwave Pro
will play the audio when you press ‘play’ on your device.
Please note: Using 3.5mm aux input will override a
Bluetooth source input.
CONNECTING VIA BLUETOOTH
1. Press the power buton for approximately two
seconds. The LED indicator light will flash blue and
red to indicate Soundwave Pro is ready for pairing*
2. Turn on Bluetooth on your mobile phone/
music device**
3. ’Soundwave Pro’ will appear on your mobile
phone/music device. Select ‘Soundwave Pro’
to pair
4. Once your mobile phone/music device is
connected to the Soundwave Pro speaker,
the LED indicator light will change to a solid
blue, and the speaker will announce “Bluetooth
connected”***
5. Enjoy your music
*Soundwave Pro will automatically enter Bluetooth pairing
mode when turned on for the first time. To reset Bluetooth
pairing, hold the UNISYNC buton for 6 seconds to forget all
devices and initiate Bluetooth pairing mode again.
**If you are not familiar with Bluetooth pairing for your mobile
phone or music device, refer to the user guide for your mobile
phone/music device for instructions to pair a new device
using Bluetooth.
***Soundwave Pro will always store the last device paired
and if the device is within Bluetooth range, Soundwave Pro
will automatically connect to the device.
3. QUICK START GUIDE 3. QUICK START GUIDE
54

LED INDICATOR
• Flashing blue/red - Bluetooth pairing mode
• Solid blue - Bluetooth connected
• Solid red - 3.5mm aux connected
POWER BUTTON
• 2 second long press - power on/power of
• 4 second long press - power on + Bluetooth pairing
PLAY BUTTON
• 1 press - play/pause/answer call/end call
• 2 second long press - reject call
• 2 presses - Siri/Google
VOLUME UP BUTTON
• 1 press - volume up
• 2 second long press - nex track
VOLUME DOWN BUTTON
• 1 press - volume down
• 2 second long press - restar track
• 2 second long press x2 - previous track
UNISYNCTM BUTTON
• 1 press - cycle through UNISYNC functions
(UNISYNC mode/UNISYNC audio/UNISYNC disabled)
• 2 second long press - disconnects Bluetooth
(device remains paired to Soundwave Pro)
• 6 second long press - resets UNISYNC and Bluetooth
connection (device will need to be re-paired)
3. QUICK START GUIDE 4. OPERATING CONTROLS
CHARGING YOUR SOUNDWAVE PRO
1. Remove the por cover on the back of the
speaker, and connect the speaker via the USB-C
por to the USB-A power source, using the
included charging cable
2. The LED batery indicator will flash from one to four
LEDs to indicate Soundwave Pro is charging. The
lights will stop flashing once Soundwave Pro is fully
charged. A full charge will take approximately 4-5
hours, depending on the speed of the charger.
Once charged, remove the charge cable and
replace the por cover.
Please note: Soundwave Pro will announce
“low batery” when the batery level reaches
approximately 10%
LED BATTERY INDICATOR
4 white lights on: Batery 76-100%
3 white lights on: Batery 51-75%
2 white lights on: Batery 26-50%
1 white light on: Batery 0-25%
76

LED INDICATOR
• Flashing blue/red - Bluetooth pairing mode
• Solid blue - Bluetooth connected
• Solid red - 3.5mm aux connected
POWER BUTTON
• 2 second long press - power on/power of
• 4 second long press - power on + Bluetooth pairing
PLAY BUTTON
• 1 press - play/pause/answer call/end call
• 2 second long press - reject call
• 2 presses - Siri/Google
VOLUME UP BUTTON
• 1 press - volume up
• 2 second long press - nex track
VOLUME DOWN BUTTON
• 1 press - volume down
• 2 second long press - restar track
• 2 second long press x2 - previous track
UNISYNCTM BUTTON
• 1 press - cycle through UNISYNC functions
(UNISYNC mode/UNISYNC audio/UNISYNC disabled)
• 2 second long press - disconnects Bluetooth
(device remains paired to Soundwave Pro)
• 6 second long press - resets UNISYNC and Bluetooth
connection (device will need to be re-paired)
3. QUICK START GUIDE 4. OPERATING CONTROLS
CHARGING YOUR SOUNDWAVE PRO
1. Remove the por cover on the back of the
speaker, and connect the speaker via the USB-C
por to the USB-A power source, using the
included charging cable
2. The LED batery indicator will flash from one to four
LEDs to indicate Soundwave Pro is charging. The
lights will stop flashing once Soundwave Pro is fully
charged. A full charge will take approximately 4-5
hours, depending on the speed of the charger.
Once charged, remove the charge cable and
replace the por cover.
Please note: Soundwave Pro will announce
“low batery” when the batery level reaches
approximately 10%
LED BATTERY INDICATOR
4 white lights on: Batery 76-100%
3 white lights on: Batery 51-75%
2 white lights on: Batery 26-50%
1 white light on: Batery 0-25%
76

CONNECTING MULTIPLE SPEAKERS VIA UNISYNCTM
Using the UNISYNC feature you can connect up to
50 UNISYNC compatible speakers. In this example,
your Soundwave Pro is your primary device.
To connect a replica, shor press the UNISYNC
buton on your primary speaker once to enter
UNISYNC mode. Once the primary announces it is
in UNISYNC mode, repeat on the replica. Afer the
replica announces it is in UNISYNC mode, press the
UNISYNC buton on the replica device once more –
the replica will announce it is using UNISYNC audio.
The primary speaker will show a solid blue light while
replicas will show a flashing red and blue light.
To exit UNISYNC mode, press the UNISYNC buton
until you hear UNISYNC disabled.*
Press and hold the UNISYNC buton for 6 seconds
to reset the UNISYNC function.**
*If UNISYNC is disabled, Soundwave Pro will disconnect from
but remember the replicas connected to it.
**Reseting UNISYNC will enable Soundwave Pro to ‘forget’ all
replica devices and Bluetooth connections.
POWERBANK
Soundwave Pro comes with a USB-A output por,
which is capable of supplying up to 5V⎓2A (10W).
Whilst charging another device, the LED batery
indicator lights will flash. The number of lights
flashing will indicate how much charge is remaining
in the speaker’s powerbank.
MULTIPOINT CONNECTION
Mulipoint is a feature that allows Soundwave Pro
to connect to two Bluetooth devices at once. This
means that you can listen to music from one device,
whilst still hearing notifications and receiving calls
from another device.
To setup Mulipoint:
1. Connect your first Bluetooth device
2. Hold down the UNISYNC buton for 2 seconds
to disconnect Bluetooth
3. Connect your second Bluetooth device
4. Hold down the power buton for 2 seconds
and turn of Soundwave Pro
5. Hold down the power buton for 2 seconds
and turn on Soundwave Pro
Soundwave Pro will announce “Bluetooth
connected” twice. Soundwave Pro will play audio
from the last device it receives a command from,
but it will treat the device with calls and notifications
as priority.
4. OPERATING CONTROLS 4. OPERATING CONTROLS
98

CONNECTING MULTIPLE SPEAKERS VIA UNISYNCTM
Using the UNISYNC feature you can connect up to
50 UNISYNC compatible speakers. In this example,
your Soundwave Pro is your primary device.
To connect a replica, shor press the UNISYNC
buton on your primary speaker once to enter
UNISYNC mode. Once the primary announces it is
in UNISYNC mode, repeat on the replica. Afer the
replica announces it is in UNISYNC mode, press the
UNISYNC buton on the replica device once more –
the replica will announce it is using UNISYNC audio.
The primary speaker will show a solid blue light while
replicas will show a flashing red and blue light.
To exit UNISYNC mode, press the UNISYNC buton
until you hear UNISYNC disabled.*
Press and hold the UNISYNC buton for 6 seconds
to reset the UNISYNC function.**
*If UNISYNC is disabled, Soundwave Pro will disconnect from
but remember the replicas connected to it.
**Reseting UNISYNC will enable Soundwave Pro to ‘forget’ all
replica devices and Bluetooth connections.
POWERBANK
Soundwave Pro comes with a USB-A output por,
which is capable of supplying up to 5V⎓2A (10W).
Whilst charging another device, the LED batery
indicator lights will flash. The number of lights
flashing will indicate how much charge is remaining
in the speaker’s powerbank.
MULTIPOINT CONNECTION
Mulipoint is a feature that allows Soundwave Pro
to connect to two Bluetooth devices at once. This
means that you can listen to music from one device,
whilst still hearing notifications and receiving calls
from another device.
To setup Mulipoint:
1. Connect your first Bluetooth device
2. Hold down the UNISYNC buton for 2 seconds
to disconnect Bluetooth
3. Connect your second Bluetooth device
4. Hold down the power buton for 2 seconds
and turn of Soundwave Pro
5. Hold down the power buton for 2 seconds
and turn on Soundwave Pro
Soundwave Pro will announce “Bluetooth
connected” twice. Soundwave Pro will play audio
from the last device it receives a command from,
but it will treat the device with calls and notifications
as priority.
4. OPERATING CONTROLS 4. OPERATING CONTROLS
98

• Dimensions: 231x 105x 150mm
• Unit weight: 1345g
• USB-C input: 5V⎓3A (15W), 9V⎓2A (18W)
• USB-A output: 5V⎓2A (10W)
• Batery capacity: 15600mAh
• Playime: Up to 24 hours at 50% volume
• Driver size: 2x 70mm
• Frequency response: 20-22kHz
• Power output: 20W
• Total max power output: 40W
• IP rating: 56 Splashproof
(when por cover is closed)
• Bluetooth version: 5.3
• Aux input: 3.5mm
1. Do not atempt to charge Soundwave Pro when it
is wet or you suspect water has seeped into the
device. Thoroughly dry Soundwave Pro and make
sure all connections are dry before atempting to
remove the por cover. Failure to do so may resul
in electrical shock, fire or electrical damage to
Soundwave Pro and may void the warranty
2. Do not use Soundwave Pro near an open fire,
heat source or excessive heat
3. Do not disassemble this device or atempt to
modify in any manner
4. Sound levels should be appropriate to your
environment and comply with all local regulations.
5. Ensure that you can hear and are aware of
any potential hazards around you when you are
enjoying your Soundwave Pro speaker
All Sprout products go through thorough quality
assurance inspections. If you find that your device
is excessively hot, is emiting odour, is deformed,
abraded, cut or is experiencing or demonstrating an
abnormal phenomenon, immediately stop all product
use and contact Sprout.
5. SPECIFICATIONS 6. IMPORTANT SAFETY INFO
1110

• Dimensions: 231x 105x 150mm
• Unit weight: 1345g
• USB-C input: 5V⎓3A (15W), 9V⎓2A (18W)
• USB-A output: 5V⎓2A (10W)
• Batery capacity: 15600mAh
• Playime: Up to 24 hours at 50% volume
• Driver size: 2x 70mm
• Frequency response: 20-22kHz
• Power output: 20W
• Total max power output: 40W
• IP rating: 56 Splashproof
(when por cover is closed)
• Bluetooth version: 5.3
• Aux input: 3.5mm
1. Do not atempt to charge Soundwave Pro when it
is wet or you suspect water has seeped into the
device. Thoroughly dry Soundwave Pro and make
sure all connections are dry before atempting to
remove the por cover. Failure to do so may resul
in electrical shock, fire or electrical damage to
Soundwave Pro and may void the warranty
2. Do not use Soundwave Pro near an open fire,
heat source or excessive heat
3. Do not disassemble this device or atempt to
modify in any manner
4. Sound levels should be appropriate to your
environment and comply with all local regulations.
5. Ensure that you can hear and are aware of
any potential hazards around you when you are
enjoying your Soundwave Pro speaker
All Sprout products go through thorough quality
assurance inspections. If you find that your device
is excessively hot, is emiting odour, is deformed,
abraded, cut or is experiencing or demonstrating an
abnormal phenomenon, immediately stop all product
use and contact Sprout.
5. SPECIFICATIONS 6. IMPORTANT SAFETY INFO
1110

Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to
a major failure. If you have any questions about your
rights in relation to this product, please return it to point
of sale or contact us at [e-mail].
This warranty does not afect your legal statutory
rights under the Australian Consumer Law. For more
information about your rights under Australia Consumer
Law go to .accc.gov.au.
Your Sprout Soundwave Pro speaker is warranted
to the original owner for 24 months from the
date of purchase against defects in material and
workmanship under normal use and service.
The warranty does not cover misuse of this product
and liability will not exceed the purchase price of
the product.
If you have any problems while using the product,
please do not hesitate to contact our customer
suppor team.
For warranty and technical suppor please visit
sproutinc.com.au or email [e-mail].
Thank you for choosing a Sprout product.
7. CONSUMER GUARANTEE
12

Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to
a major failure. If you have any questions about your
rights in relation to this product, please return it to point
of sale or contact us at [e-mail].
This warranty does not afect your legal statutory
rights under the Australian Consumer Law. For more
information about your rights under Australia Consumer
Law go to .accc.gov.au.
Your Sprout Soundwave Pro speaker is warranted
to the original owner for 24 months from the
date of purchase against defects in material and
workmanship under normal use and service.
The warranty does not cover misuse of this product
and liability will not exceed the purchase price of
the product.
If you have any problems while using the product,
please do not hesitate to contact our customer
suppor team.
For warranty and technical suppor please visit
sproutinc.com.au or email [e-mail].
Thank you for choosing a Sprout product.
7. CONSUMER GUARANTEE
12

Sprout Accessories Pty Ltd
W: Sproutinc.com.au | E: [e-mail]