Spy Tec GL-300 User manual

GL-300
Quick start guide
www.spytecinc.com

Setup (Hardware)
1. Connect the charger (part shown in Figure 2) to mains
supply.
2. Open the cover for USB connection (in Figure 1) and
connect the micro USB end of charger to the unit
3. The power LED (second from top) will be blinking
while the unit is being charged. Once fully charged, it
will be solid.
4. As soon as the charger is disconnected from the unit,
the power LED will be o.
5. The Cellular LED should be slowly flashing and this
indicates that connectivity has been obtained.
Log Into Your Account
Your login details will be e-mailed to you to the address
you provided on the GPS activation form. Using the
account login and password, log on to your account at
http://www.spytecgps.com . Once the Cellular LED is
flashing slowly, the device is transmitting information
to the host server and you can see all the logged
information.
Figure 1
Figure 2
Setup (Tracking Service)
1. Visit http://www.spytecinc.com/gps-activation and
complete the activation form and click the submit
button when you are finished.
2. Our GPS Team will program your GPS tracking device
and e-mail you the log-in credentials to use at http://
www.spytecgps.com.
Troubleshooting
1. Ifyouareexperiencingdiicultiessigninguporlogging
in to your GPS account please e-mail GPSactivation@
spytecinc.com for immediate assistance.
2. If you are experiencing technical diiculties with your
GPS tracking, please contact support.gps@spytecinc.
com for immediate assistance.
3. If your GL-300 has just been setup and is incorrectly
showing a location of New Jersey, please place the
GL-300 by a window (or bring it outside) for 5-10
minutes so it is able to achieve its first GPS lock.

www.spytecinc.com
GL-300
Quick start guide