SQ Professional BLITZ SUPERBLEND User manual

instruction manual
SUPERBLEND
BLENDER & GRINDER
BEFORE OPERATING THIS UNIT, PLEASE CAREFULLY READ THE FOLLOWING INSTRUCTIONS.
SQIM 4157-4226-5685-5686-5959 30-09-19 V7

SQIM 4157-4226-5685-5686-5959 30-09-19 V7 | SQ Professional Ltd © 2019 All rights reserved
Superblend Blender & Grinder Instruction Manual
TABLE OF CONTENTS
CONTENTS
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
IMPORTANT SAFEGUARDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
ASSEMBLY OF THE GLASS JUG OR GRINDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
USING THE BLENDER OR GRINDER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
ENVIRONMENTAL PROTECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
2

All images are for illustration purposes only. Actual products may vary.
IMPORTANT SAFEGUARDS
Superblend Blender & Grinder Instruction Manual
IMPORTANT!
Due to sharp parts and potential hazards
the appliance is not suitable for the use
of children under 8 years old. Even when
off please keep the appliance and cord
out of the reach of children. Children
over 8 must be supervised by an adult
at all times when using or cleaning the
appliance. This is not a toy!
The appliance can be used by persons
with reduced physical, sensory or
mental capabilities if they have been
given supervision and instruction and
understand the use and hazards involved.
Always disconnect the appliance from the
mains supply socket if it is left unattended
and before assembling, disassembling or
cleaning.
If the mains cable is damaged, it must be
replaced by qualified persons in order to
avoid any hazards.
3

SHARP BLADES!
10
SQIM 4157-4226-5685-5686-5959 30-09-19 V7 | SQ Professional Ltd © 2019 All rights reserved
Superblend Blender & Grinder Instruction Manual
FEATURES
FEATURES
1 Lid cap
2 Lid
3 Anti-drip spout
4 Grinder cover
5 Grinder base
6 Jug
7 Connector
8 Transmitter
9 Motor block
10 Rotary switch
SPECIFICATIONS
Rated Voltage: . . . . . . . . . . . . . . . . . . . . . . .220-240V
Frequency:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50Hz
Rated Power:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400W
Blender Jug Capacity:. . . . . . . . . . . . . . . . . . . . . 1.5L
Grinder Capacity: . . . . . . . . . . . . . . . . . . . . . . . . .100g
READ THE INSTRUCTIONS AND KEEP THEM SAFE. REMOVE ALL PACKAGING BEFORE USE.
2
3
4
5
6
7
8
9
1
4

All images are for illustration purposes only. Actual products may vary.
FEATURES
Superblend Blender & Grinder Instruction Manual
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1 Read all instructions carefully before using the appliance.
2 This appliance is intended for household use only. It is not
suitable for commercial use such as staff kitchen areas and
other working environments.
3 Ensure that the appliance is always placed on a firm and flat
surface, away from the edge of the work top. Do not place
the appliance onto a metal tray or metal surface whilst in use.
Do not place the appliance on, or near, a hot gas or electric
burner or in a heated oven. Do not operate the appliance with
wet hands or barefoot.
4 Keep the appliance and mains cable away from the edges of
work tops and out of reach of children. Route the cable so
it does not overhang, and cannot be tripped over or caught.
5 Do not let the cable run across an open space, such as
between a low socket and a table, or across any hot area, such
as cooker. Heat may damage the mains cable.
6 The connections on both sides of the mains cable (the
appliance and socket) should never be strained. If the mains
cable is damaged it must be replaced by qualified person or
service to avoid any hazards.
7 Do not use the appliance in a bathroom,
near water, or outdoors. Do not immerse any of
the parts (appliance, mains cable, plug) in water
or other liquids to protect against fire, electric
shock and personal injury.
8 Do not use the appliance if it is damaged or
malfunctions. Do not leave the appliance unattended
whilst in use. Use and store it out of reach of children.
9 This appliance must not be operated by an external timer or
a remote control system.
10 SQ Professional Ltd may not be held liable for eventual
damages to persons, animals or objects caused by incorrect
installation or deriving from improper, erroneous or
unreasonable use.
11 The connector
7
and transmitter
8
should always be
kept dry. Before washing and drying disconnect the power
supply; ensure that the connector
7
and transmitter
8
are
completely dry before you reconnect the appliance to power
supply.
12 Ensure the lid
2
or assembled grinder
4
are securely in
place and the jug
6
is correctly locked onto the motor block
9
before operating the appliance.
13 Do not switch on the appliance when it is empty. Ensure
there is the at least a minimum amount of liquid or solid
ingredients in the blender or grinder.
14 Always close the lid
2
and the anti-drip spout
3
, or have
the grinder securely placed and locked onto the motor block
9
before you switch the appliance on. Do not open the lid
2
or attempt to open the grinder
3
whilst the appliance
is running.
15 Keep hands and utensils out of the jug
6
while
blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper
may be used but only when the blender is not
running.
16 Blades are extremely sharp. Handle carefully.
17 Switch off the the blender and unplug from the socket
before changing attachments or approaching parts that
move while in use. Unplug the blender when not in use.
18 Ensure that the blender has come to a complete stop before
cleaning and storing away. Keep the attachments, motor
block
9
, cable, and plug away from sources of heat. Store
in a dry place.
19 Do not use the blender for any other purpose
than its intended use.
20 Use the jug
6
or grinder
4
only with the motor block
9
supplied (and vice versa) and do not tamper with the
connector in any way.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE!
5

SQIM 4157-4226-5685-5686-5959 30-09-19 V7 | SQ Professional Ltd © 2019 All rights reserved
Superblend Blender & Grinder Instruction Manual
USE & CARE
BEFORE FIRST USE
ALL PARTS OF THE BLENDER OR THE GRINDER ARE TO BE THOROUGHLY
CLEANED BEFORE BEING USED FOR THE FIRST TIME (SEE SECTION
ON CLEANING).
Ensure that the rotary switch
10
is in the position “0”. Take out the
required length of cable and connect the appliance to the mains
supply.
ASSEMBLY OF THE BLENDER JUG
1 Mount the jug
6
on a motor block
9
, align the connector
7
and transmitter
8
- image A. Turn the jug
6
counterclockwise
until it locks. image B
2 Place the lid
2
on top and push down firmly - image C.
To remove the lid cap
1
turn it counterclockwise. To insert
the lid cap and turn it clockwise until it locks - image D. Ensure
that the anti-drip spout
2
is firmly closed before switching
the appliance on.
3 Once finished, ensure the appliance is switched off and
unplugged. Turn the jug
6
clockwise to remove it from
the motor block
9
.
A B C D
ASSEMBLY OF THE GRINDING MILL
1 Turn the grinder cover
4
upside down.
2 Insert the grinder base
5
and turn it clockwise untill it locks.
image E.
3 Attach the assembled grinding mill on to the motor block
9
- image F. Turn it counterclockwise until it clicks to ensure
it is locked. image G
USING THE BLENDER OR GRINDER
1 Assemble the blender or grinder and ensure that the rotary
switch
10
is turned to ‘0’. Remove the lid or the grinder cover.
2 BLENDER: Place the ingredients into the jug
6
and attach
the lid
2
. Remove the lid cap
1
to pour the liquids through
the opening then place it back before you start blending.
For best results do not fill the jug above the 1000ml mark,
especially if using liquid ingredients.
GRINDER: fill the grinder cover half full and attach the grinder
base
4
. Mount the assembled grinder on the motor block
9
and ensure it is safely locked.
3 Turn the rotary switch
10
to desired speed to switch the
appliance on.
SPEED SETTING
1 LOW SPEED - for light blending of liquid ingredients
2HIGH SPEED - for heavy blending with solid ingredients
and thicker liquids.
PULSE SHORT BURSTS OF VERY HIGH SPEED - rough blending
of solid ingredients and thicker liquids, grinding and
short, powerful impulse movements (the dial does not
permanently engage in the ‘PULSE’ setting. You have to
hold the dial or turn it repeatedly in the ‘PULSE’ setting).
After using the blender or the grinder, always turn the switch
to the ‘0’ setting and unplug the appliance from the mains socket.
USEFUL TIPS
1 To achieve the best results when pureeing solid ingredients,
place small portions into the jug one by one instead of
placing a large quantity all at once. Do not overload.
2 When processing solid ingredients, cut them into small pieces
(2-3cm) first.
3 When mixing solid ingredients start off first with a small
amount of liquid. Gradually add more of the liquid through
the opening in the lid.
4 If blending warm liquids or ingredients always ensure that
they are cooled down before blending. Do not fill the glass
jug over 1000ml mark.
5 Always stabilise the blender or grinder by placing your hand
on top of the lid when operating the appliance.
6 For stirring solids or very thick liquid ingredients we
recommend that you use the blender in ‘PULSE’ mode to
prevent the blades from becoming stuck.
6

All images are for illustration purposes only. Actual products may vary.
USE & CARE
Superblend Blender & Grinder Instruction Manual
CLEANING
MOTOR BLOCK
NEVER IMMERSE THE MOTOR BLOCK IN WATER.
Wipe the motor block
9
clean with a damp cloth and dry
immediately with a soft cloth to avoid scratches and water marks
on the surface.
LIGHT CLEANING:
BLENDER: empty the jug
6
and fill it half way with tepid water and
a mild detergent. Place the jug on the motor block
9
and turn the
rotary switch
10
several times into the ‘PULSE’ setting, holding for a
few seconds each time. Empty the jug and rinse until clean, then dry.
GRINDER: to clean the grinder wipe the grinder base
4
it with a
damp cloth or sponge, using a lukewarm water with some washing
up liquid, if necessary. Remove any stuck food remains with a
small dishwashing brush. Dry immediately with a soft cloth. Wash
the grinder cover
3
with warm soapy water and dry thoroughly.
THOROUGH CLEANING:
BE CAREFUL WHEN HANDLING THE CUTTING BLADE INSIDE THE JUG.
THE BLADES ARE VERY SHARP.
BLENDER: Ensure that the jug
6
or grinder are completely empty
before cleaning. Use a small dishwashing brush to remove the
stuck food around the blades.
All parts except the motor block
9
can be washed by hand
or in a dishwasher. Do not use harsh scourers and agressive or
abrasive detergents.
WIRING UK PLUGS
Should the power cable or the power plug become
damaged, arrange for these to be replaced by Customer
Service or qualified person
before continuing to
use the appliance. The
appliance is fitted with
an ASTA approved 5A
fuse (BS1362) in a 5A plug
(BS1363).
The appliance must not
be used without fuse
cover fitted.
5 AMP
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked
with this symbol must not be disposed of with unsorted municipal
waste, but recovered, reused or recycled.
SERVICE
The product is not user-serviceable. If it is not
working, read the instructions, check the plug
fuse and main fuse/circuit breaker. If it is still not
working, consult your retailer.
If that does not solve the problem ring Customer
Service – they may be able to offer technical advice. Please have
the Model Number to hand, as they will not be able to help you
without it.
If you are advised to return the product to us, pack it carefully,
include a note with your name, address, day phone number, and
description of the problem.
If under a warranty, say where and when it was purchased and
include a valid VAT receipt. Send it to SQ Professional Ltd.
WARRANTY
THE WARRANTY FOR THIS PRODUCT IS COVERED BY
SQ PROFESSIONAL LIMITED. ANY FAULTS WITH THIS PRODUCT
ARISING THROUGH A MANUFACTURER DEFECT WILL BE COVERED
FOR 1 YEAR FROM THE DATE OF PURCHASE, SUBJECT TO A VALID
VAT RECEIPT BEING PRESENTED.
THIS DOES NOT INCLUDE FAULTS OR DAMAGE CAUSED BY MISUSE
OF GENERAL WEAR AND TEAR.
PLEASE CONTACT CUSTOMER SERVICES ON 01992 716 070
OR SEND AN E-MAIL TO [email protected],
MONDAY TO FRIDAY FROM 09:30 - 17:30.
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
7

Voltage Business Centre, Units 1 - 3
6 Mollison Avenue, Enfield, EN3 7XQ
T: 01992 716 070 |F: 01992 700 538
E: [email protected]
WWW.SQPROFESSIONAL.COM
SCAN THE QR CODE TO DISCOVER TIPS, RECIPES AND
INSPIRATION ON THE SQ PROFESSIONAL BLOG