SQ Professional MEGA Series User manual

MEGARANGE
BLENDER
&GRINDER
BEFORE OPERATING THIS UNIT, PLEASE CAREFULLY READ THE FOLLOWING INSTRUCTIONS.
MGIM 9366-9367-9368 01-07-2020
INSTRUCTION MANUAL
MEGABLEND

MGIM 9366-9367-9368 01-07-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED.
MEGABLEND BLENDER & GRINDER INSTRUCTION MANUAL
IMPORTANT!
Due to sharp parts and potential hazards the appliance is not suitable
for the use of children under 8 years old.
When off please keep the appliance and mains cable out of the
reach of children.
Children over 8 must be supervised by an adult at all times when
using or cleaning the appliance. This is not a toy!
The appliance can be used by persons with reduced physical,
sensory or mental capabilities if they have been given supervision
and instruction and understand the use and hazards involved.
Always disconnect the appliance from the mains supply socket if it is
left unattended and before assembling, disassembling or cleaning.
If the mains cable is damaged, it must be replaced by qualified
persons in order to avoid any hazards.
TABLE OF CONTENTS
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
BEFORE FIRST USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
ASSEMBLY OF THE BLENDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
ASSEMBLY OF THE GRINDING MILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
USING THE BLENDER OR GRINDING MILL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
USEFUL TIPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
ENVIRONMENTAL PROTECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
GUARANTEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
2

SHARP BLADES!
ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
MEGABLEND BLENDER & GRINDER INSTRUCTION MANUAL
SPECIFICATIONS
Rated Voltage: . . . . . . . . . . . . . . 220-240V
Frequency: . . . . . . . . . . . . . . . . . . . 50Hz
Rated Power: . . . . . . . . . . . . . . . . 600W
Blender Jug Capacity: . . . . . 1.5L
Grinding mill Capacity:. . . . 100g approx.
READ THE INSTRUCTIONS
AND KEEP THEM SAFE.
REMOVE ALL PACKAGING
BEFORE USE.
FEATURES
1 Removable lid cap
2 Lid
3 Easy-pour spout
4 Blender jug
5 Blender blade
6 Motor unit
7 Rotary switch
8 Anti-slip feet
9 Grinding mill cover
10 Grinding mill blade
11 Grinding mill base











3

MGIM 9366-9367-9368 01-07-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED.
MEGABLEND BLENDER & GRINDER INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1 Read all instructions carefully before using the
appliance.
2 This appliance is intended for household use only.
It is not suitable for commercial use such as staff
kitchen areas and other working environments.
3 Ensure that the appliance is always placed on a
firm and flat surface, away from the edge of the
worktop. Do not place the appliance onto a metal
tray or metal surface whilst in use. Do not place the
appliance on, or near, a hot gas or electric burner
or in a heated oven. Do not operate the appliance
with wet hands or barefoot.
4 Keep the appliance and mains cable away from
the edges of worktops and out of reach of children.
Route the mains cable so it does not overhang, and
cannot be tripped over or caught.
5 Do not let the mains cable run across an open
space, such as between a low socket and a table,
or across any hot area, such as a cooker. Heat may
damage the mains cable.
6 The connections on both sides of the mains
cable (the appliance and socket) should never be
strained. If the mains cable is damaged it must be
replaced by a qualified person or service to avoid
any hazards.
7 Do not use the appliance in a bathroom, near
water, or outdoors. Do not immerse any of the
parts (appliance, mains cable, plug) in water
or other liquids to protect against fire, electric
shock and personal injury.
8 Do not use the appliance if it is damaged
or malfunctions. Do not leave the appliance
unattended whilst in use. Use and store it out of
reach of children.
9 This appliance must not be operated by an
external timer or a remote control system.
10 SQ Professional Ltd may not be held liable for
eventual damages to persons, animals or objects
caused by incorrect installation or deriving from
improper, erroneous or unreasonable use.
11 The connector (on the bottom of the blender jug 
or grinding mill base ), and transmitter (on top of
the motor unit ) should always be kept dry.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE!
12 Before washing and drying, disconnect the power
supply; ensure that the connector and transmitter
are completely dry before you reconnect the
appliance to power supply.
13 Ensure the lid or the grinding mill cover are
securely in place and the blender jug or the
assembled grinding mill are correctly locked onto
the motor unit before operating the appliance.
14 Do not switch on the appliance when it is empty.
Ensure there is the at least a minimum amount of
liquid or solid ingredients in the blender jug or
grinding mill.
15 Always ensure the lid is closed, or have the
grinding mill securely placed and locked onto the
motor unit before you switch the appliance on.
Do not open the lid  or attempt to open the
grinding mill whilst the appliance is running.
16 Keep hands and utensils out of the blender jug 
while blending to reduce the risk of severe injury
to persons or damage to the blender. A scraper
may be used but only when the blender is not
running.
17 The blade is extremely sharp. Handle carefully.
18 Always switch off the appliance and unplug the
mains cable from the power socket before changing
attachments or approaching parts that move while
in use. Unplug the appliance when not in use.
19 Ensure that the appliance has come to a complete
stop before cleaning and storing away. Keep the
attachments, motor unit , mains cable, and plug
away from sources of heat. Store in a dry place.
20 Do not use the appliance for any other purpose
than its intended use.
21 Use the blender jug or grinding mill only with
the motor unit supplied (and vice versa) and do
not tamper with the connector in any way.
4

ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
MEGABLEND BLENDER & GRINDER INSTRUCTION MANUAL
BEFORE FIRST USE
ALL PARTS OF THE BLENDER OR THE GRINDING MILL ARE TO BE THOROUGHLY CLEANED BEFORE BEING USED FOR THE FIRST TIME (SEE
SECTION ON CLEANING).
Ensure that the rotary switch is turned to 0 and mains cable unplugged from the power socket.
ASSEMBLY OF THE BLENDER
A Mount the blender jug on the motor unit.
B Align the triangle on the blender jug with the
open lock symbol on the side of the motor unit .
C Turn the blender jug anti-clockwise to align the
triangle with the closed lock symbol on the
motor unit .
D Place the lid on top and push down firmly. To
insert the lid cap , align its protrusions with the
groves on top of the lid , push down and turn
clockwise until it locks in place. To remove the lid cap
turn it counter-clockwise and lift it.
E Once finished blending, switch the appliance
off and unplug the mains cable from the
power socket. Turn the blender jug anti-
clockwise to unlock it and carefully lift it from
the motor unit .
ASSEMBLY OF THE GRINDING MILL
F Turn the grinding mill cover upside-down and
fill it with the dry ingredients. Do not fill above the
MAX mark.
G Turn the grinding mill base upside-down and
insert it into the grinding mill cover , aligning the
groves and protrusions on the grinding mill base 
with those on the inside of the grinding mill cover
. Holding the grinding mill cover  firmly, turn the
grinding mill base clockwise until it locks in place.
Ensure the grinding mill cover  is securely fit.
H Mount the assembled grinding mill aligning the
triangle under the MAX mark on the grinding mill
cover  with the open lock symbol on the side
of the motor unit .
I Turn the assembled grinding mill counter-clockwise
until it clicks and the triangle under the MAX mark
is aligned with the closed lock symbol on the motor
unit .
J After grinding is finished, switch the appliance off
and unplug the mains cable from the power socket.
Detach the grinding mill from the motor unit by
turning it anti-clockwise.
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKED
UNLOCKED
LOCKEDUNLOCKED
LOCKED
UNLOCKED
A B C D E
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKEDUNLOCKED
LOCKED
UNLOCKED
F G H I J
5

MGIM 9366-9367-9368 01-07-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED.
MEGABLEND BLENDER & GRINDER INSTRUCTION MANUAL
USING THE BLENDER OR GRINDING MILL
Ensure that the rotary switch is turned to 0 and
mains cable unplugged from the power socket.
BLENDER
1 Assemble the blender and remove the lid .
2 Place the ingredients into the blender jug  and
attach the lid .
3 Remove the lid cap  to pour the liquids through
the opening then place it back before you start
blending.
4 Plug the mains cable into the power socket and
turn the rotary switch  to desired speed to
switch the appliance on.
5 If blending warm liquids or ingredients always
ensure that they are cooled down before blending.
Do not fill the glass jug over 1000ml mark.
6 Always stabilise the blender or grinding mill by
placing your hand on top of the lid when operating
the appliance.
7 For stirring solids or very thick liquid ingredients
we recommend that you use the blender in PULSE
mode to prevent the blades from becoming stuck.
GRINDING MILL
1 Assemble the grinding mill and mount it onto the
motor unit .
2 Place one hand on top of the grinding mill to
stabilise it and turn the rotary switch to desired
speed.
3 Grind until the desired consistency has been
reached. Do not exceed 1 minute of grinding at
one time.
4 Once the grinding process is finished, detach the
grinding mill from the motor unit . Hold it upside
down, carefully detach the grinding mill base 
and scoop the ground ingredients out.
SPEED SETTINGS
1 -low speed - for light blending of liquid ingredients.
2 -high speed - for heavy blending with solid ingredients
and thicker liquids.
P -pulse (short bursts of very high speed) - for rough
blending of solid ingredients and thick liquids,
grinding and short, powerful pulse movements
(the dial does not permanently engage in the
pulse setting. You have to hold the rotary switch 
or turn it repeatedly to the PULSE setting).
After using the blender or the grinding mill, always
turn the switch to the 0setting and unplug the
appliance from the mains socket.
CLEANING
MOTOR UNIT
NEVER IMMERSE THE MOTOR UNIT IN WATER.
Wipe the motor unit  clean with a damp cloth and
dry immediately with a soft cloth to avoid scratches and
water marks on the surface.
LIGHT CLEANING
BLENDER - empty the blender jug and fill it half
way with tepid soapy water. Place the blender jug
on the motor unit and turn the rotary switch 
to PULSE setting several times, each time holding for
a few seconds. Empty the blender jug and rinse
until clean. Dry with a soft, lint free cloth.
GRINDING MILL - wipe the grinding mill base with
a damp cloth or sponge, using tepid soapy water, if
necessary. Remove any stuck food remnants with a
small dish-washing brush. Dry immediately with a soft,
lint free cloth. Wash the grinding mill cover with
warm soapy water and dry thoroughly.
USEFUL TIPS
To achieve the best results when pureeing solid
ingredients, cut them into small pieces first (2-
3cm). Place small portions into the blender jug 
then add one by one. do not overload.
When mixing solid ingredients, start off with a
small amount of liquid. Gradually add more of
the liquid through the opening in the lid .
Grind in intervals of 30 seconds with a 1 minute
pause in between. Repeat the grinding process
until you are happy with the grind consistency.
Experimenting with the length of grinding will
enable you to get your preferred grind.
To yield the best flavour and aroma always grind
fresh ingredients. To prolong the freshness store
the coffee beans and the ground coffee in an
airtight container in a cool, dry place.
Freshly ground spices have more flavour and are
best when ground just before use. Only grind
spice seeds that do not contain moisture or oil
such as peppercorn, coriander seeds, mustard
seeds and similar.
Grinding extremely hard, oily, moist or sticky
ingredients may damage the appliance. Grains
such as corn, wheat, rye and similar may cause
damage to the grinding mill cover .
Nuts contain a lot of oil which will release during
the grinding process and clog the grinding mill
blades .
never add o ils or liquids wh ile grinding.
6

ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
MEGABLEND BLENDER & GRINDER INSTRUCTION MANUAL
THOROUGH CLEANING
BE VERY CAREFUL WHEN HANDLING THE CUTTING BLADE INSIDE
THE BLENDER JUG. THE BLADES ARE VERY SHARP.
Ensure that the blender jug , grinding mill base 
and grinding mill cover are completely empty before
cleaning. Use a small dish-washing brush to remove
the stuck food around the blades and wash with tepid
soapy water.
All parts except the motor unit can be washed by
hand or in a dishwasher. Do not use harsh scourers
and aggressive or abrasive detergents.
Ensure that all parts are completely dry before
assembling and operating the appliance.
WIRING UK PLUGS
Should the mains cable or the power plug become
damaged, arrange for these to be replaced by
Customer Service or a qualified person before
continuing to use the appliance. The appliance is
fitted with an ASTA approved 5A fuse (BS1362) in a
5A plug (BS1363).
The appliance must not be used without a fuse
cover fitted.
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to
hazardous substances in electrical and electronic
goods, appliances marked with this symbol must not
be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
5 AMP
SERVICE
The product is not user-serviceable. If it is not
working, read the instructions, check the plug fuse
and main fuse/circuit breaker. If it is still not working,
consult your retailer.
If that does not solve the problem ring Customer
Service – they may be able to offer technical advice.
Please have the Model Number to hand, as they will
not be able to help you without it. If you are advised
to return the product to us, pack it carefully, include
a note with your name, address, day phone number,
and description of the problem.
If under a guarantee, say where and when it was
purchased and include a valid VAT receipt. Send it
to SQ Professional Ltd.
GUARANTEE
THE GUARANTEE FOR THIS PRODUCT IS COVERED
BY SQ PROFESSIONAL LIMITED. ANY FAULTS
WITH THIS PRODUCT ARISING THROUGH A
MANUFACTURER DEFECT WILL BE COVERED FOR 1
YEAR FROM THE DATE OF PURCHASE, SUBJECT TO
A VALID VAT RECEIPT BEING PRESENTED.
THIS DOES NOT INCLUDE FAULTS OR DAMAGE
CAUSED BY MISUSE OF GENERAL WEAR AND
TEAR.
PLEASE CONTACT CUSTOMER SERVICES BY
PHONE ON 01992 716 070 OR SEND AN E-MAIL
TO [e-mail], MONDAY
TO FRIDAY FROM 09:30 - 17:30.
THIS DOES NOT AFFECT YOUR STATUTORY
RIGHTS.
7

MEGARANGE
SCAN THE QR CODE TO EXPLORE
OUR FULL PRODUCT RANGE.
VOLTAGE BUSINESS CENTRE, UNITS 1 - 3 6 MOLLISON AVENUE ENFIELD EN3 7XQ
t01992 716 070 f01992 700 538 [e-mail]
WWW.SQPROFESSIONAL.COM