SQ Professional BLITZ User manual

INSTRUCTION MANUAL
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
SQIM 8244-1143 29-07-2022 V10 | SQ Professional Ltd © 2022 All rights reserved
2 IN 1 FOOD PROCESSOR

2
Due to sharp parts and potential hazards, this appliance should not be used by children
under 16 years old unless supervised by an adult.
Please keep the appliance and mains cable out of the reach of children. This is not a toy!
If used by persons with reduced physical, sensory or mental capabilities, instruction and
supervision must be given to understand the use of the appliance and the hazards involved.
Always disconnect the appliance from the power socket if it is left unattended and before
assembling, disassembling or cleaning.
If the mains cable is damaged, it must be replaced by qualified persons
in order to avoid any hazards.
FEATURES
1 Blending Jug Cap
2 Blending Jug Lid
3 Blending Jug
4 Connector
5 Safety Interlocks
6 Motor Unit
7 Speed Control
8 PULSE Button
9 Push Cover
10 Feeder Tube
11 Mixing Bowl Cover
12 Mixing bowl
13 Citrus Juicer Basket
14 Juicing Cone
15 Drive Shaft
16 Blade Disc
17 Chopping Blade
18 Mixing Blade
19 Blade Retainer
20 Fine Slicing Blade
21 Coarse Slicing Blade
22 Fine Shredding Blade
23 Coarse Shredding Blade
24 Potato Slurry Blade
20
21
22
23
24
SHARP BLADES!
3
6
7
5
4
1
2
8
5
5
16
17
18
19
9
15
10
11
12
19
5
5
13
5
14

3
IMPORTANT SAFEGUARDS
Do not use the appliance in a bathroom, near water, or
outdoors. Do not operate the appliance with wet hands or
bare feet.
Do not immerse any of the parts (appliance, mains cable,
plug) in water or other liquids during use to protect from
fire, electric shock and personal injury.
Do not use the appliance if it is damaged or malfunctioning.
Do not leave the appliance unattended whilst in use. Use
and store it out of reach of children.
Never process hot liquids and ingredients, as they may be
ejected due to a sudden build-up of steam.
To reduce the risk of injury, ensure that blades are
correctly attached. Always handle the blades carefully, as
they are extremely sharp.
Do not open the blending jug lid wor the mixing bowl
cover swhilst the appliance is running.
• This appliance is intended for household use only.
• Ensure that the appliance is always placed on a firm and flat
surface, away from any edges of the worktop. Do not place the
appliance onto a metal tray or metal surface whilst in use. Do
not place the appliance on, or near, a hot gas or electric burner
or in a heated oven.
• Keep the appliance and mains cable away from the edges of
worktops and out of reach of children. Route the mains cable so
it does not overhang, and cannot be tripped over or caught.
• Do not let the mains cable run across an open space, such as
between a low power socket and a table, or across any hot
area, such as a cooker. Heat may damage the mains cable.
• The connections on both sides of the mains cable (the
appliance and the power socket) should never be strained. If
the mains cable is damaged it must be replaced by a qualified
person or service to avoid any hazards.
• This appliance must not be operated by an external timer or a
remote control system.
• The top of the motor unit yshould always be kept dry. Before
cleaning and drying, disconnect the power supply. Ensure that
the motor unit yis completely dry before you reconnect the
appliance to the power supply.
• Ensure the blending jug w, mixing bowl d, juicing bowl f
and any attachments are securely in place before operating.
• Always close the blending jug lid wor have the mixing bowl
cover ssecurely locked in place before you switch the
appliance on.
• Never switch on the appliance when it is empty. Always
ensure there is at least the minimum amount of liquid or solid
ingredients in the blending jug eor mixing bowl dwhen
operating the appliance.
• Keep hands and utensils out of the blending jug eor mixing
bowl dwhile the appliance is running, to reduce the risk of
severe injury to persons or damage to the appliance. A scraper
may be used but only when the appliance is not running.
• Always use the push cover oto push food down the feeder
tube a. Never use your fingers, a fork, a spoon, a knife or
other utensils.
• Never use the chopping blade ktogether with the mixing
blade lor keep either of them in the mixing bowl while using
the blade disc jor citrus juicer basket f.
• Only remove the attachments when the appliance has come to
a complete stop.
• Always switch off the appliance and unplug the mains cable
from the power socket before changing attachments, or
approaching parts that move while in use. Unplug the appliance
when not in use.
• Keep the attachments, motor unit y, cable, and plug away
from sources of heat. Store in a dry place.
• Do not use the appliance for any purpose, aside from its
intended use.
• Use the blending jug e, mixing bowl dand citrus juicer f
only with the motor unit ysupplied (and vice versa) and do
not tamper with the connector rin any way.
• Operate the appliance for 40-60 seconds, then let it rest for 3
minutes before restarting. After five cycles, rest the appliance
for 20 minutes. To fully protect the appliance, the maximum
duration for continuous operation should be 40 seconds, with a
resting period of 30 minutes before restarting. Thus, after five
40-second cycles, rest the appliance for 1 hour.
BEFORE FIRST USE
Before attaching or removing any parts, make sure the
mains cable is unplugged from the power socket and the
speed control is in the 0 position.
Always take care when handling the stainless steel blades
as they are very sharp.
Prior to first use, wash all the parts that come into contact with food
with warm soapy water and dry thoroughly (see section on Cleaning).
Do not exceed the recommended maximum quantities.
Do not use the appliance to process ingredients that are hard (e.g.
frozen meat, bones and pips) or sticky (e.g. candied orange peel).

4
OPERATION DIAGRAMS
SLICING & SHREDDING
F G H I
CHOPPING
A B
JUICING
N O
C
P
E
R
D
Q
BLENDING
MLJ K

5
OPERATING INSTRUCTIONS
The appliance will not operate if the mixing bowl cover or
blending jug lid are not correctly fitted.
Do not attempt to remove the blending jug lid or mixing
bowl cover while the appliance is in use.
CHOPPING
Suitable for and chopping, puréeing or whisking.
• Ensure that the appliance is unplugged, then place the drive shaft
hon the motor unit y.
• Place the mixing bowl don the drive shaft hwith the handle
on the right-hand side. Align the triangle on the bottom edge of the
mixing bowl dwith the open lock symbol on the motor unit y.
• Turn the mixing bowl dclockwise to lock it in place. The triangle
on the bottom edge of the mixing bowl dmust be aligned with
the closed lock symbol on the motor unit yin order to operate
the appliance. operation diagram a
• Mount the blade retainer ;on the tube in the middle of the
mixing bowl d.
• Fit the chopping blade konto the blade retainer ;and
ensure that it sits flat on the bottom of the mixing bowl d, with the
lower blade almost touching the bottom. operation diagram b
• Place ingredients into the mixing bowl d. Large pieces of food
should be cut into 2cm cubes first. operation diagram c
• Place the mixing bowl cover sonto the mixing bowl dwith
the feeder tube aon the right-hand side. Align the triangle
on the edge of the mixing bowl cover swith the open lock
symbol on the upper rim of the mixing bowl d.
• Hold the feeder tube awith your left hand and the mixing
bowl dhandle with your right hand. Turn the mixing bowl
cover sclockwise until it clicks into place. This will engage the
safety interlocks in the handle and ensure the mixing bowl
dis securely attached, so that the appliance is safe to operate.
operation diagram d
• Plug the mains cable into the electric socket. Rotate the speed
control to the desired speed. operation diagram e
• For short, powerful bursts, press the PULSE button and hold
for the desired time. When released, the appliance will return
to the initial speed setting selected on the speed control .
• When the chopping process is finished, turn the speed control
to 0, ensure the appliance has come to a complete stop and
then unplug the mains cable from the electric socket.
• Hold the handle of the mixing bowl dwith your right hand
and the feeder tube awith your left hand, and turn it anti-
clockwise to release the safety interlock . After this, remove
the mixing bowl cover sby turning it anti-clockwise to unlock it.
• Carefully lift the blade retainer ;with the chopping blade
kattached, then push the handle of the mixing bowl d
anti-clockwise to unlock it. Following this, lift the mixing bowl d
carefully and empty the ingredients.
WHISKING
Suitable for cake mixes, kneading, beating egg whites, making a
batter, and whipping cream.
• The whisking function has the same operating steps as the
chopping function. Simply replace the chopping blade kwith
the mixing blade l. operation diagram b
SLICING, GRATING AND SHREDDING
Always use the push cover to push the food down.
Suitable for processing firm foods such as carrots and hard cheeses,
as well as softer foods such as tomatoes and cucumbers. Food should
be cleaned and cut into pieces that fit into the feeder tube.
• Ensure that the appliance is unplugged, then place the drive
shaft hon the motor unit y.
• Place the mixing bowl donto the drive shaft hwith the
handle on the right-hand side. Align the triangle on the bottom
edge of the mixing bowldwith the open lock symbol on the
motor unit y. Turn the mixing bowl in a clockwise direction to
lock it in place. The triangle on the bottom edge of the mixing
bowl dmust be aligned with the closed lock symbol on the
motor unit yin order to work the appliance.
• Mount the blade retainer ;onto the tube in the middle of the
mixing bowl d. operation diagram a
• Hold the blade disc with one hand and insert one of the slicing
blades
20
21
, shredding blades
22
23
or a slurry blade
24
onto
the opening of the blade disc jwith the other hand. Ensure
that the hole in the blade sits on top of the hole in the centre of
the blade disc j. operation diagram f
• Place the assembled blade disc jon the blade retainer ;
and ensure that it is stable. operation diagram g
• Place the mixing bowl cover son the mixing bowl dwith the
feeder tube aon the right-hand side. Align the triangle on the edge
of the mixing bowl cover swith the open lock symbol on the upper
rim of the mixing bowl d.
• Hold the feeder tube awith your left hand and the mixing bowl
dwith your right hand. Turn the mixing bowl cover sclockwise
until it clicks into place, as this will engage the safety interlocks .
• Plug the mains cable into the electric socket then select the desired
speed by rotating the speed control . operation diagram h
• Place the ingredients into the feeder tube aand slowly push the
food down with the push cover o. operation diagram i
• To switch the appliance off, turn the speed control to 0and
unplug the mains cable from the electric socket. Turn the mixing
bowl cover santi-clockwise to unlock and remove it.
• Remove any food left on top of the blade disc jwith an
appropriate utensil. Use the large holes on the blade disc jto
safely lift it off of the blade retainer ;.
• Remove the blade by carefully sliding it outwards, then remove
the blade retainer ;, detach the mixing bowl dand empty the
ingredients.

6
BLENDING
• Ensure that the appliance is unplugged from the electric socket,
then remove the drive shaft hfrom the motor unit y.
• Place the blending jug eon the motor unit ywith the handle
on the right-hand side. Align the triangle on the bottom edge
of the blending jug ewith the open lock symbol on the inside
rim of the motor unit y. There is no safety interlock sensor
on the left-hand side of the motor unit yand therefore, the
appliance will not operate if the blending jug handle eis on the
left-hand side. operation diagram j
• Once the blending jug ehas been correctly aligned, turn
its handle in a clockwise direction until it clicks and locks in
place. operation diagram k
• Place ingredients into the blending jug e, then place the
blending jug lid won top with its long tab on the right-hand
side. Rotate the blending jug lid wclockwise until it clicks
into place. This will engage the safety interlocks in the
handle and ensure that the blending jug eis securely
attached. Insert the blending jug cap qinto the lid opening.
operation diagrams l- m
• Plug the mains cable into the electric socket and rotate the
speed control to select the desired speed.
• To activate a short, powerful impulse movement press and
hold the PULSE button for the desired amount of time.
• To add liquids during the blending process, remove the blending
jug cap qand slowly pour the liquid into the jug.
• To switch the appliance off, turn the speed control to 0,
ensure it has come to a complete stop and then unplug the
mains cable from the electric socket.
• Following this, turn the blending jug lid wanti-clockwise to
disengage the safety interlocks and then remove it. After
this, turn the blending jug eanti-clockwise to remove it from
the motor unit yand pour the contents out.
JUICING
When juicing large amounts of fruit, ensure that the liquid
in the mixing bowl does not exceed the 2000 ml.
• Ensure that the appliance is unplugged, then place the drive
shaft hon the motor unit y.
• Place the mixing bowl don the drive shaft hwith the handle
on the right-hand side. Align the triangle on the bottom edge of the
mixing bowl dwith the open lock symbol on the motor unit ythen
turn it clockwise to lock it in place. The triangle on the bottom edge of
the mixing bowl dmust be aligned with the closed lock symbol on
the motor unit yto activate the safety interlocks .
operation diagram n
• Place the citrus juicer basket fon the mixing bowl d. Rotate
it clockwise until the tab on its rim locks into place. This will
engage the safety interlock in the handle and ensure that
the citrus juicer basket fis securely attached, making sure the
appliance is safe to operate. operation diagram o- p
• Insert the juicing cone into the citrus juicer basket fand ensure
that it sits snuggly on the drive shaft h.
• Plug the mains cable into the electric socket and select the desired
speed by rotating the speed control . operation diagram q
• Carefully place a halved citrus fruit onto the juicing cone 
and gently press down to extract the juice. Using lower speeds is
recommended when juicing citruses. operation diagram r
• To switch off the appliance, turn the speed control to 0, ensure
the appliance has come to a complete stop then unplug the
mains cable from the electric socket.
• When the juicing process is completed, first remove the juicing
cone . To remove the citrus juicer basket fturn it anti-
clockwise to disengage the safety interlock and remove it.
• Turn the mixing bowl danti-clockwise to unlock and remove it
from the motor unit yand then pour out your fresh juice.
CLEANING
Always unplug from the electric socket before cleaning.
Never immerse the motor unit in water.
Exercise care when handling the stainless steel blades.
Do not use harsh scourers, sponges, chemical or abrasive
substances on any parts.
Wipe the motor unit yclean with a damp cloth, then dry
immediately with a soft cloth, to avoid scratches and water marks on
the surface. Ensure that the connector ris completely dry.
LIGHT CLEANING
• After the blending jug eor mixing bowl dhave been
emptied, fill it half way with tepid water and a mild detergent,
then return it to the motor unit y. If using the mixing bowl d
ensure the chopping blade kor mixing blade lare correctly
inserted.
• Cover with the blending jug lid wor mixing bowl cover sand
ensure they are correctly fitted and locked.
• Turn the speed control to 1 and press the PULSE button ,
holding for a few seconds each time. Empty the blending jug e
or mixing bowl d, rinse until clean, then dry thoroughly.
THOROUGH CLEANING
• Hand-wash the blending jug e, mixing bowl dand all the
attachments with warm water and mild detergent.
• Use a small dry brush to clean any citrus bits stuck in the slits of
the juicer bowl and any food residue that may be obstructing
the safety interlocks , connector r, blades or any parts that
come in contact with the connector r.
• All attachments except the blending jug eand mixing bowl d
can be washed in the dishwasher. Place the attachments in
the upper part of the dishwasher but make sure that the water
never exceeds a maximum temperature of 50°C.

7
STORAGE
Make sure that your appliance and all its accessories are
completely dry before putting them away.
The 2 in 1 Food Processor has a space-saving storage system where
all accessories can be put away tidily in the mixing bowl d.
Store the appliance in a dry and cool place.
SPECIFICATIONS
Rated Voltage: 220-240V~
Frequency: 50/60Hz
Rated Power: 700W
SERVICE
The product is not user-serviceable. If it is not working, read the
instructions, check the plug fuse and main fuse/circuit breaker. If it
is still not working, consult your retailer.
If that does not solve the problem ring Customer Service – they may
be able to offer technical advice. Please have the Model Number to
hand, as they will not be able to help you without it.
If you are advised to return the product to us, pack it carefully,
include a note with your name, address, day phone number, and
description of the problem. If under a guarantee, say where and
when it was purchased and include a valid VAT receipt. Send it to SQ
Professional Ltd.
GUARANTEE
The guarantee for this product is covered by SQ Professional
Limited. Any faults with this product arising through a manufacturer
defect will be covered for 1 year from the date of purchase, subject
to a valid vat receipt being presented. This does not include faults or
damage caused by misuse of general wear and tear. SQ Professional
Ltd will not be held liable for general wear and tear, or eventual
damages to persons, animals or objects caused by incorrect
installation or deriving from improper, erroneous or unreasonable
use.
Please contact customer services on 01992 716 070 or send an
e-mail to [e-mail], Monday to Friday from 09:30 -
17:30. This does not affect your statutory rights.
ELECTRICAL
The product must not be used without the fuse cover
fitted.
Should the power cable or the power plug become damaged,
arrange for these to be replaced by Customer Service or a qualified
person before continuing to use the appliance. The appliance is
fitted with a 5A fuse (BS1362) in a 5A plug (BS1363).
ENVIRONMENTAL
To reduce environmental and health problems due
to hazardous substances in electrical and electronic
goods, appliances marked with the symbol
below must not be disposed of with unsorted
municipal waste. Please repair, reuse or recycle
appropriately.
All images are for illustration purposes only. Actual products may vary.

SCAN THE QR CODE TO EXPLORE
OUR FULL PRODUCT RANGE.
Voltage Business Centre, Units 1 - 3
6 Mollison Avenue, Eneld, EN3 7XQ
T: 01992 716 070 | F: 01992 700 538
E: [email protected]
WWW.SQPROFESSIONAL.COM