SQ Professional Power Juicer User manual

POWER JUICER
INSTRUCTION MANUAL
BEFORE OPERATING THIS UNIT, PLEASE READ THE FOLLOWING INSTRUCTIONS.
SQPC 5589 / 8306 21-11-2018

SQPC 5589 / 8306 30-11-2018 | SQ Professional Ltd © 2019 All rights reserved
BLITZ POWER JUICER INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
2
Due to sharp parts and potenal hazards the appliance is not
suitable for the use of children under 8 years old. Even when o
please, keep the appliance and cord out of the reach of children.
Children over 8 must be supervised by an adult at all mes when
using the appliance in any way. Children may not assemble
the product or touch the sharp blades at any mes to prevent
against accidents. This is not a toy!
The appliance can be used by persons with reduced physical,
sensory or mental capabilies if they have been given supervision
and instrucon and understand the use and hazards involved.

All images are for illustration purposes only. Actual products may vary.
IMPORTANT SAFEGUARDS
BLITZ POWER JUICER INSTRUCTION MANUAL
3
1 Read all instructions before using.
2 To protect against risk of electrical
shock do not put the unit in water or
any other liquid.
3 Close supervision is necessary when
any appliance is used around children.
4 Unplug from the mains socket when
the appliance is not in use, or before
putting on or taking o parts, and
before cleaning.
5 Avoid contact with moving parts.
6 Do not operate an appliance with a
damaged cord or plug, or after the
appliance is dropped or damaged in
any manner. Return the appliance
to the nearest authorised service
facility for examination, repair or
mechanical adjustment.
7 The use of attachments that are not
recommended by the manufacturer
may carry a risk of injury to persons.
8 Do not use outdoors.
9 Do not let the cord hang over the edge
of a table or counter.
10 Ensure juicer is completely assembled
before use. Do not operate the unit
without mesh lter, pulp container and
juice container
11 Always turn the juicer o after each use.
Ensure the motor stops completely
and unplug the power cord from
the wall outlet before attempting to
move the appliance, before cleaning,
disassembling, assembling and when
storing the appliance.
12 Do not unlock the interlocking arm
when juicer is in operation.
13 Do not leave this appliance unattended
during use.
14 Do not operate the juicer without the
pulp container in place.
15 The mesh lter is very sharp.
Handle very carefully. Do not use
the juicer if the rotating mesh lter
is damaged.
16 Do not put your ngers or other
objects into the juicer chute while
it is in operation. If food becomes
lodged in opening, use food pusher or
another piece of fruit or vegetable to
push it down.
17 Do not juice stone fruit unless seeds
and/or stones have been removed.
18 Do not operate the juicer longer
than 20 seconds before inserting
ingredients.
19 Do not operate the appliance
continuously with heavy loads for
more than 10 seconds. Allow the
motor to rest for 5 minutes between
each use.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using any electrical appliance, basic safety precautions should always be
followed including the following:

SQPC 5589 / 8306 30-11-2018 | SQ Professional Ltd © 2019 All rights reserved
BLITZ POWER JUICER INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
4
SPECIFICATION
Rated Voltage ....... 220-240V
Frequency .....................50Hz
Power ......................... 800W
POWER JUICER PARTS
1Interlocking safety arm
2Juice spout
3 Mesh lter holder
4 Stainless steel micro mesh lter
5Pulp container
6Juicer cover
7Feed chute
8Food pusher
9Juicer jug
10 Switch
11 Main housing
12 Juicing bowl
1
3
4
6
7
8
11
9
5
2
12
10

All images are for illustration purposes only. Actual products may vary.
IMPORTANT SAFEGUARDS
BLITZ POWER JUICER INSTRUCTION MANUAL
5
Before rst use
1 Carefully wash and dry all parts which come into contact with food – lid, food pusher,
stainless steel micro mesh lter, juicing bowl, pulp container and juicer jug. Wipe the
main body with a damp cloth.
2 Take out the required length of cable and connect the device to the mains supply.
Operating your appliance
1 Ensure that the juicer is correctly
assembled, the juicer jug (9) is placed
under the juice spout (2), and pulp
container (5) is in position before
commencing juicing.
2 Plug the cable to the mains socket and
turn the power ON at the power outlet.
Adjust the speed to the desired setting.
3 With the motor running, place food into
the feed chute (7). Use the food pusher
(8) to gently guide food down, and
extract the maximum amount of juice.
Speed setting
USE 1 for low speed - to juice softer
produce
2for high speed - to juice harder
produce
PULSE for grinding and short, powerful
impulse movements.
After using the Power Juicer, always move
the switch into the ‘0’ setting and disconnect
from the mains socket.
Place the juicing bowl on
the main housing
Place the mesh filter over the
mesh filter holder and press it
downward until it snaps into place
Place the juicer cover on the
juicing bowl by aligning the feed
chute and the mesh filter holder.
Fix the interlocking safety arm by
pushing it upward
Place the pulp container under
the pulp spout by tilting it
slightly forward
Slide the food pusher into the
food chute by aligning the groove
in the pusher
1
2
3 4
5 6
Place the juicing bowl on
the main housing
Place the mesh filter over the
mesh filter holder and press it
downward until it snaps into place
Place the juicer cover on the
juicing bowl by aligning the feed
chute and the mesh filter holder.
Fix the interlocking safety arm by
pushing it upward
Place the pulp container under
the pulp spout by tilting it
slightly forward
Slide the food pusher into the
food chute by aligning the groove
in the pusher
1 2
3
4
5 6
Place the juicing bowl on
the main housing
Place the mesh filter over the
mesh filter holder and press it
downward until it snaps into place
Place the juicer cover on the
juicing bowl by aligning the feed
chute and the mesh filter holder.
Fix the interlocking safety arm by
pushing it upward
Place the pulp container under
the pulp spout by tilting it
slightly forward
Slide the food pusher into the
food chute by aligning the groove
in the pusher
1 2
3 4
5
6
Place the juicing bowl on
the main housing
Place the mesh filter over the
mesh filter holder and press it
downward until it snaps into place
Place the juicer cover on the
juicing bowl by aligning the feed
chute and the mesh filter holder.
Fix the interlocking safety arm by
pushing it upward
Place the pulp container under
the pulp spout by tilting it
slightly forward
Slide the food pusher into the
food chute by aligning the groove
in the pusher
1 2
3 4
5
6
Place the juicing bowl on
the main housing
Place the mesh filter over the
mesh filter holder and press it
downward until it snaps into place
Place the juicer cover on the
juicing bowl by aligning the feed
chute and the mesh filter holder.
Fix the interlocking safety arm by
pushing it upward
Place the pulp container under
the pulp spout by tilting it
slightly forward
Slide the food pusher into the
food chute by aligning the groove
in the pusher
1
2
3 4
5 6
Place the juicing bowl on
the main housing
Place the mesh filter over the
mesh filter holder and press it
downward until it snaps into place
Place the juicer cover on the
juicing bowl by aligning the feed
chute and the mesh filter holder.
Fix the interlocking safety arm by
pushing it upward
Place the pulp container under
the pulp spout by tilting it
slightly forward
Slide the food pusher into the
food chute by aligning the groove
in the pusher
1 2
3
4
5 6
Assembly Instructions

SQPC 5589 / 8306 30-11-2018 | SQ Professional Ltd © 2019 All rights reserved
BLITZ POWER JUICER INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
6
Care and cleaning
When using certain foods some
discoloration or staining of the plastic
may occure, which is perfectly normal.
To prevent discolouration wash the
stained parts immediately after use.
1 Unplug the appliance from the main
socket, then lower the interlocking
safety arm (1) to unlock the lid.
2 Remove the juicer cover (6) and
scrape any excess pulp into the pulp
container (5).
3 Remove the pulp container by tilting it
back. Empty and clean thoroughly.
4 Remove the mesh lter (4) by lifting
the juicing bowl; this will unlock the
mesh lter.
5 Thoroughly clean the ne mesh of the
micro mesh lter, ideally with a brush.
Ensure that the ne mesh holes are
not blocked.
6 If the micro mesh lter can not be
cleaned immediately after use, soak the
lter in warm soapy water immediately
after you nish juicing.
7 Clean all the parts in contact with
food using warm soapy water and a
soft brush. The cutting blade is very
sharp. Handle carefully!
8 Never immerse the main housing in
water or any other liquid.
Wipe the housing with a damp cloth
and dry immediately with a soft cloth
to avoid scratches and water marks on
the surface.
9 All accessories except the main
housing can be washed by hand or
in a dishwasher. Use warm water
and mild washing up detergent when
hand-washing.
10 If using a dishwasher make sure that
the water never exceeds a maximum
temperature of 50˚C.
11 Do not use abrasive or corrosive
cleaning agents, harsh scourers or
metal brushes to avoid damage.
Storage
Make sure that your appliance and all its
accessories are completely dry before
putting them away. Store the appliance in
a clean and dry place.
Wiring UK plugs
Should the power cable or the power
plug become damaged, arrange for
these to be replaced by Customer
Service or qualified person before
continuing to use the appliance.
The product has a 13A BS1362 fuse in a
13A BS 1363 plug.
Environmental protection
To avoid environmental
and health problems due
to hazardous substances
in electrical and electronic
goods, appliances marked
with WEEE symbol must
not be disposed of with
unsorted municipal waste, but recovered,
reused or recycled.

All images are for illustration purposes only. Actual products may vary.
IMPORTANT SAFEGUARDS
BLITZ POWER JUICER INSTRUCTION MANUAL
7
Service
The product is not user serviceable. If it is
not working, read the instructions, check
the plug fuse and main fuse/circuit breaker.
If it is still not working, consult your retailer.
If that does not solve your problem, ring
Customer Services - they may be able to
oer technical advice.
If they advise you to return the product
to us, pack it carefully, include a note with
your name, address, day phone number,
and description of the problem.
If under a warranty, say where and when
it was purchased and include proof of
purchase. Send it to SQ Professional Ltd.
WARRANTY
THE WARRANTY FOR THIS PRODUCT IS
COVERED BY SQ PROFESSIONAL LIMITED.
ANY FAULTS WITH THIS PRODUCT ARISING
THROUGH A MANUFACTURER DEFECT WILL
BE COVERED FOR 1 YEAR FROM THE DATE
OF PURCHASE, SUBJECT TO A VALID PROOF
OF PURCHASE BEING PRESENTED. THIS
DOES NOT INCLUDE FAULTS OR DAMAGE
CAUSED BY MISUSE OF GENERAL WEAR
AND TEAR.
PLEASE CONTACT CUSTOMER SERVICES ON
01992 716 070 OR SEND AN E-MAIL TO
[email protected], MONDAY TO
FRIDAY FROM 9:30 - 17:30.
THIS DOES NOT AFFECT YOUR STATUTORY
RIGHTS.

SCAN THE QR CODE TO DISCOVER THE ENTIRE
RANGE OF SQ PROFESSIONAL PRODUCTS.
Voltage Business Centre, Units 1-3
6 Mollison Avenue, Eneld, EN3 7XQ
T: 01992 716 070
F: 01992 700 538
[email protected]
www.sqprofessional.com