SSAM VIIFAM 7422 Series User manual

CAMERA CENTRAL POWER AND VIDEO ADAPTER
VIIFAM*7422
Using the VIIFAM*7422
This is the perfect Interface between a central power supply, videomanagement and the over the SSAM
combi-cable connected cameras. The clear usage and the easy installation of this print (only one cable per
camera) allows a fast and cheap installation. With the fastener added it is easy to place the print in a big
range of SSAM power supplies.
More Information on our internet side www.ssam.com
TECHNICAL SPECIFICATIONS
Power Input ............................. 14,4V DC
Power Output .......................... 12,0V DC (you will need to adjust the voltage at your power-supply)
max. current (constant) ........... 3,0 A
max. current (peak) ................. 30,0 A
Video-Inputs .............................terminals High-Z for 1Vss / 75 Ohm
Audio-Inputs .............................terminals High-Z for microphone from device
Video-Outputs ..........................BNC plug High-Z for 1Vss / 75Ohm
Audio-Outputs ..........................terminals High-Z for audio devices
Humity ......................................10% to 95% relative / non condensing
Operation temperature .............-50° to 100°C
Dimensions (WxHxD) .............. 98 x 127 x 30 mm

INSTALLATION
You will need an voltmeter with a range from 5V to 20V DC
Quick Installation: cable length (and cable resistance) is not important
1. No devices should be connected on the Power-Input
2. Turn on the power-supply and messure the voltage and adjust the power supply that you get 12V DC at
the outputs on the print.
Normal Installation: cable length and resistance are important
1. No devices should be connected on the Power-Input
2. Turn on the power-supply and messure the voltage and adjust the power supply that you get 12V DC at
the outputs of the farest device. After that connect the device and repeat the steps for all other devices
INSTALLATION SAMPLE
Recommend Components
SONGAM*AL30 Power Supply 12V 3A
SONGAM*AL80 Power Supply 12V 1,5A
VISTWS*0012 DC Plug
VISTXX*BC411G BNC plug right angle with screw terminal
VISTXX*BC111F BNC plug with screw terminal
KAVICV*0700 Combi-cable (Video minicoax +2x 0,75 + 2x 0,22)
KAVICV*7422 Combi-cable (Video minicoax +Audio minicoax +2x 0,75 + 4x 0,22)
AAAKBR*0072 Rechargeable Batterypack 12V 7,2 Ah
AAAKBR*0020 Rechargeable Batterypack 12V 2,0 Ah
AAAKBR*0012 Rechargeable Batterypack 12V 1,2 Ah
VIAPYO*8312 Microphone printed circuit board
This product is exclusively for use in CCTV applications and has no other purpose.
Read and Retain these instructions - All the safety and operating instructions should be read before
the unit is operated and should be retained for future reference.
Cleaning - Unplug the unit from the supply outlet before cleaning. Use a damp cloth for cleaning. Do
not use liquid cleaners or aerosol cleaners.
Attachments - Do not use attachments that have not been recommended by the product
manufacturer as they may cause hazards.
If you have any problems contact SSAM UK.
This device must be connected with ground!