Stadium ST15PRO User manual
Safety Precautions
Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.
Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment
or smoke machines.
Do not expose the speaker cabinet to direct rain or stand in water. Liquid getting into the box
will
risk a short circuit and will be hazardous.
Do not stack the speaker cabinet in a manner that could cause injury should a cabinet become
dislodged.
Before installation, ensure that the voltage and frequency of power outlet match the power
requirements of the loudspeaker.
Disconnect from main power before making connection with the loudspeaker.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let
the
power-cord come into contact with other cables. Only handle the power-cord by the plug.
In case the fuse needs to be replaced, change with identical rate and dimesions.
Attention
Before connecting or operating your new
loudspeaker,
please study the accompanying
instruction manual paying special attention to the operating precautions and wiring procedure.
This symbol on the product or
on
Its packaging indicates that this product shall
not
be
treated
as
household waste. Instead
it
shall
be handed over to the applicable collection point for the recycling
of
electrical an electronic equipment By ensuring this product
is
disposed
of
correctly,
you
will
help prevent potential negative consequences for the environment and
human
health, which
could
otherwise be caused by inappropriate waste handling of this product The recycling of
materials
will
help to conserve natural resources. For more detailed information about recycling of
this
product,
please contact your local city office, your household waste disposal service or the
shop
where you
purchased the
product.
User Manual
Pg.
1
ST15PRO
15” ACTIVE BLUETOOTH
SPEAKER WITH CLASS AB
BI-AMP
User Manual
Pg.
2
Functions
1. Volume 1: Controls Microphone input
2. 1/4 Jack for Microphone input
3. XLR Connector for Microphone input
4. BT light: lights up when BT function is working
5. BT Switch Turns on / off the BT function
6. Volume 2: Controls line in volume
7. 3.5mm Auxiliary input
8. RCA Input
9. XLR Line in input
10. XLR Line out to another active speaker
11. Equalizer: to control the tone level of high
frequency at range - 12dBto + 12dB
12. Equalizer: to control the tone level of low
frequency at range - 12dBto + 12dB
13. Clip LED : lights up when the applied input
signal reachesto distortion, reduce the input
level in order to eliminate the distortion
14. BT volume: Controls the volume of Bluetooth
15. Power Switch: To switch the unit on / off
16. Main power supply inlet
Remote Functions
NOTE: The remote control FUNCTIONS only works
when using BT with your phone.
STOP = No function
MODE = No function
MUTE = Mutes the volume
PREV = Previous track
NEXT = Next track
VOL- = Lower the volume
VOL+ = Increase the volume
EQ = No function
0-9,100+ 200+ = No function
Technical assistance
If you need assistance setting up or using your Stadium
product now or in the future, call Stadium Support.
Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
Scan QR code for
more products in
the STADIUM range www.stadiumsound.com.au
Table of contents
Other Stadium Speakers manuals
