Stairville DDC-6 User manual

DDC-6, DDC-12 LCD
DMX controller
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
16.09.2016, ID: 389945, 389946

Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 13
4 Starting up.................................................................................................................................................. 14
5 Connections and controls................................................................................................................... 17
6 Technical specifications....................................................................................................................... 25
7 Plug and connection assignment.................................................................................................... 26
8 Protecting the environment.............................................................................................................. 27
Table of contents
DDC-6, DDC-12 LCD
3

1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
DMX controller
4

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
DDC-6, DDC-12 LCD
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
DMX controller
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
DDC-6, DDC-12 LCD
7

2 Safety instructions
This device is used to control spotlights, dimmers, lighting effects equipment or other DMX-
controlled devices. Use the device only as described in this user manual. Any other use or use
under other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damages resulting from improper
use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
DMX controller
8

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
Safety
Safety instructions
DDC-6, DDC-12 LCD
9

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
fire.
Safety instructions
DMX controller
10

NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Safety instructions
DDC-6, DDC-12 LCD
11

NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC floor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad
floor protectors or a carpet.
Safety instructions
DMX controller
12

3 Features
Special features of this monitor speaker:
n6 channel faders (DDC-6 item no. 389945)
n12 channel faders (DDC-12 item no. 389946)
nMaster fader
nDisplay to indicate the settings.
nCompact design
nSimple operation
nPower supply from a 9-V battery (not included in scope of delivery) or from the supplied
external 9-V power adapter.
Features
DDC-6, DDC-12 LCD
13

4 Starting up
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
You can use either a 9-V battery or the 9-V connector for external power supply. Before con‐
necting check for correct polarity.
To insert or change the battery, switch off the device first. Take off the battery compartment
cover carefully. Change the battery. Reattach the battery compartment cover and snap it care‐
fully into place until you hear a click.
Power supply
Changing the battery
Starting up
DMX controller
14

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
Starting up
DDC-6, DDC-12 LCD
15

Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼W).
Connections in DMX mode
Starting up
DMX controller
16

5 Connections and controls
Top view
Connections and controls
DDC-6, DDC-12 LCD
17

1[DISPLAY]
DMX channel display and value display of the values set witht he faders.
2[MASTER]
Master fader.
The master fader controls all channels simultaneously.
3[1] … [6]
Channel faders 1 through 6.
The channel faders allow up to six DMX channels to be controlled individually. In the device software, assign each con‐
nected DMX devices a channel in accordance with its position in the daisy chain: first device = 1 … last device = 6.
4[POWER]
Power indicator.
Connections and controls
DMX controller
18

Connections and controls
DDC-6, DDC-12 LCD
19

1[DISPLAY]
DMX channel display and value display of the values set with the faders.
2[MASTER]
Master fader.
The master fader controls all channels simultaneously.
3[1] … [6]
Channel faders 1 through 12.
The channel faders allow up to six DMX channels to be controlled individually. In the device software, assign each con‐
nected DMX devices a channel in accordance with its position in the daisy chain: first device = 1 … last device = 12.
Connections and controls
DMX controller
20