Rosslare AC-F Series Assembly instructions

AC-F/G4x Series
Outdoor Backlit
Standalone Controllers
Installation and Programming
Manual
Models:
AC-F43
AC-F44
AC-G43
AC-G44

Copyright © 2018 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to
ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or
subsidiaries’ (hereafter: "ROSSLARE"). Only ROSSLARE and its customers
have the right to use the information.
No part of this manual may be re-produced or transmitted in any form or
by any means, electronic or mechanical, for any purpose, without the
express written permission of ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights,
or other intellectual property rights covering the subject matter in this
manual.

TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT
IN THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT
LAWS AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE,
REPRODUCTION, AND TRANSMITTAL TO THIRD PARTIES WITHOUT
EXPRESS WRITTEN PERMISSION MAY RESULT IN LEGAL PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any
third party any license to these patents, trademarks, copyrights or other
intellectual property rights, except as expressly provided in any written
agreement of ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any
time, without being obliged to announce such revisions or changes
beforehand or after the fact.

Table of Contents
AC-F/G4x Series Installation and Programming Manual iii
Table of Contents
1.
Introduction............................................................. 11
1.1 Controller Types......................................................................................11
1.2 Box Content ..............................................................................................12
1.3 Ancillary Equipment...............................................................................12
2.
Technical Specifications............................................ 14
3.
Installation .............................................................. 16
3.1 Mounting ...................................................................................................16
3.2 Wiring..........................................................................................................18
4.
Operation ................................................................ 23
4.1 Modes of Operation..............................................................................23
4.1.1 Normal Mode ...............................................................................................23
4.1.2 Secure Mode .................................................................................................23
4.1.3 Bypass Mode.................................................................................................24
4.2 User Levels.................................................................................................24
4.3 Switching Operational Modes...........................................................26
4.3.1 From Normal to Secure Mode ..............................................................26
4.3.2 From Secure to Normal Mode ..............................................................26
4.3.3 From Normal to Bypass Mode ..............................................................27

Table of Contents
iv AC-F/G4x Series Installation and Programming Manual
4.3.4 From Bypass to Normal Mode ..............................................................27
4.4 Auxiliary Input and Output.................................................................28
4.5 REX Function.............................................................................................28
4.6 Tamper Feature .......................................................................................29
4.7 Lockout Feature (Keypad/Card Tamper) .......................................29
4.8 BL-D40 External Sounder.....................................................................30
5.
Programming........................................................... 31
5.1 Entering the Programming Mode....................................................33
5.2 Exiting the Programming Mode .......................................................33
5.3 Changing the Open Code...................................................................34
5.4 Changing the Auxiliary Code .............................................................36
5.5 Changing the Programming Code ..................................................37
5.6 Changing the Normal/Secure Code................................................38
5.7 Changing the Normal/Bypass Code................................................38
5.8 Setting Fail Safe/Secure Operation .................................................40
5.9 Setting Auxiliary Modes .......................................................................41
5.9.1 Auxiliary Mode 0 .........................................................................................45
5.9.2 Auxiliary Mode 1 .........................................................................................45
5.9.3 Auxiliary Mode 2 .........................................................................................46
5.9.4 Auxiliary Mode 3 .........................................................................................46
5.9.5 Auxiliary Mode 4 .........................................................................................47

Table of Contents
AC-F/G4x Series Installation and Programming Manual v
5.9.6 Auxiliary Mode 5 .........................................................................................47
5.9.7 Auxiliary Mode 6 .........................................................................................48
5.9.8 Auxiliary Mode 7 .........................................................................................48
5.9.9 Auxiliary Mode 8 .........................................................................................49
5.9.10 Auxiliary Mode 9 .........................................................................................50
5.10 Setting the Lockout Feature...............................................................50
5.11 Setting the Backlight Behavior..........................................................52
5.12 Enrolling Primary and Secondary Codes.......................................53
5.12.1 Primary Codes Definition .........................................................................53
5.12.2 Secondary Codes Definition ...................................................................53
5.12.3 Enrolling Methods.......................................................................................54
5.13 Deleting Primary and Secondary Codes........................................58
5.13.1 Deleting Primary and Secondary Codes using the Standard
Method ............................................................................................................58
5.13.2 Deleting Primary and Secondary Codes using the Code Search
Method ............................................................................................................59
5.14 Relay Codes Assignment .....................................................................60
5.14.1 Relay Code Assignment using Standard Method..........................61
5.14.2 Relay Code Assignment using Search Method ..............................62
5.15 Changing PIN Code Length/Factory Default Settings.............64
5.16 Replacing a Programming Code ......................................................65

Table of Contents
vi AC-F/G4x Series Installation and Programming Manual
5.17 Replacing a Normal/Secure Code....................................................66
A.
Declaration of Conformity......................................... 67
B.
Limited Warranty...................................................... 68

List of Figures
AC-F/G4x Series Installation and Programming Manual vii
List of Figures
Figure 1: Drilling Holes Identification ........................................................................17
Figure 2: Wiring Diagram for Lock Strike Relay and REX..................................20
Figure 3: Wiring Diagram for Auxiliary Input & Output ....................................21
Figure 4: Wiring Diagram for the BL-D40 External Sounder............................22

List of Tables
viii AC-F/G4x Series Installation and Programming Manual
List of Tables
Table 1: Wiring Color Guide ..........................................................................................18
Table 2: Programming Menus.......................................................................................31
Table 3: Quick Reference Guide for Auxiliary Mode Setting ...........................43

Introduction
AC-F/G4x Series Installation and Programming Manual 9
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe
and efficient installation and usage of the system and/or product, and/or
software described herein.
BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND THE
USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES.
The system must not be used for purposes other than those for
which it was designed.
The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of
the purchase documents.
ROSSLARE exclusive warranty and liability is limited to the warranty
and liability statement provided in an appendix at the end of this
document.
This manual describes the maximum configuration of the system with
the maximum number of functions, including future options.
Therefore, not all functions described in this manual may be available
in the specific system and/or product configuration you purchased.
Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or
any responsibility for consequent noncompliance, damage, or injury.
The text, images and graphics contained in the manual are for the
purpose of illustration and reference only.