Stairville Outdoor Stage PAR 12x4W Quad IR RGBW User manual

Outdoor Stage PAR
12 × 4W Quad IR RGBW,
12 × 3W Quad IR UV
LED PAR
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
25.10.2016, ID: 387911, 387902

Table of contents
1 General notes............................................................................................................................................... 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 16
4 Installation.................................................................................................................................................. 17
5 Starting up.................................................................................................................................................. 21
6 Connections and controls................................................................................................................... 24
7 Operating.................................................................................................................................................... 27
7.1 Operating mode ‘Auto Run Mode’............................................................................................. 28
7.2 Operating mode ‘Manual’ (only 12×4W Quad IR RGBW)................................................... 29
7.3 Operating mode ‘Static Colour’ (12×4W Quad IR RGBW).................................................. 32
7.4 Operating mode ‘Static Colour’ (12×3W Quad IR UV)........................................................ 33
7.5 Operating mode ‘DMX’ (12×4W Quad IR RGBW).................................................................. 33
Table of contents
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
3

7.6 Operating mode ‘DMX’ (12×3W Quad IR UV)........................................................................ 39
7.7 Operating mode ‘Slave’................................................................................................................. 42
7.8 Remote control (12×4W Quad IR RGBW)................................................................................. 42
7.9 Remote control (12×3W Quad IR UV)....................................................................................... 45
8 Technical specifications....................................................................................................................... 47
9 Plug and connection assignments.................................................................................................. 49
10 Troubleshooting...................................................................................................................................... 50
11 Cleaning....................................................................................................................................................... 52
12 Protecting the environment.............................................................................................................. 53
Table of contents
LED PAR
4

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
5

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General notes
LED PAR
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
Letterings
Displays
General notes
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
7

The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch off the device.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General notes
LED PAR
8

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – hot surface.
General notes
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
9

Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General notes
LED PAR
10

2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED technics. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
11

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or fire. If in doubt, seek advice from a registered electrician.
Safety
Safety instructions
LED PAR
12

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
13

WARNING!
Risk of burns
The surface of the device can become very hot during operation.
Do not touch the device with bare hands during operation, and after switching
off wait for at least 15 minutes.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
Safety instructions
LED PAR
14

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
15

3 Features
Due to its sturdy and weather-proof housing made of die-cast aluminium, the
Outdoor Stage PAR is especially suitable for outdoor use. The very bright UV or quad-colour
LEDs make it particularly suitable for professional lighting tasks.
nLED configuration
–Outdoor Stage PAR 12×4W Quad IR RGBW with 12 Quad-Color LEDs
–Outdoor Stage PAR 12×3W Quad IR UV with 12 UV LEDs
nControl via DMX (3 different modes), buttons and display on the unit or via IR remote con‐
trol (optional, not included)
npreprogrammed automatic shows
nMaster / Slave operation
nrugged die-cast aluminium housing
nIP65 (suitable for outdoor use)
nConnectors for power supply and DMX control via splashproof screw-mountable plugs
and couplings
nsturdy double bracket for secure attachment to trusses or firm footing on the ground
Features
LED PAR
16

4 Installation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
17

NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must not exceed the limits stated in the chapter Tech‐
nical Specifications of the User Manual.
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
LED PAR
18

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
You can install the device standing or hanging upside down. When in use, the device must be
mounted at a solid surface or clamped to an approved truss. Use the openings of the two-
piece bracket provided for mounting.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
The safety cable must be attached to the bracket.
Mounting options
Installation
Outdoor Stage PAR 12 × 4W Quad IR RGBW, 12 × 3W Quad IR UV
19

Please note that this device must not be connected to a dimmer.
Installation
LED PAR
20