Standard Horizon MATRIX GX1280S User manual

1) DSC
6)
7) WX
Used to select channels.
Press once to select CH16. For CH9 Press and hold.
Press to select NOAA weather channels.
For weather alert, select channel into scan (see 8a).
a. Select the channel using the CHANNEL knob.
b. Press and hold the “SCAN” key to program in the channel into
memory.
DISTRESS
2) PWR
3) VOL
4) SQL
5) CHANNEL KNOB
8) SCAN
Adding or removing channels into memory
(MMSI must be programmed)
a. LIFT THE DISTRESS COVER
b. PRESS KEY
c. PRESS AND HOLD KEY UNTIL SIREN SOUNDS.
Adjust to the point where random noise stops from the speaker.
Further adjustment will cause a loss in reception of wanted signals.
- MEM
Press and hold the VOL/PWR knob to turn the radio on or off.
Turn to adjust the speaker volume.
16/9
To remove a channel, select the channel to be removed (shows MEM).
Press and hold the “SCAN” key until MEM is removed from the
display
a. Adjust squelch to point where noise is not heard through speaker.
b. Press the “SCAN” key to start or stop scanning.
c. During scan if held will switch between scan and P-scan.
. Will show channels in scan memory when held and CHANNEL knob
is turned.
Switches transmitter power from 1 to 25 Watt output.
1. Select the channel that is to be dual watched to CH16.
2. Press the “DW” key to start Dual Watch function.
3. To disable Dual Watch function, press the “DW” key again.
Note if DSC SCAN is “ON” in the radio setup mode,
the radio will watch between the selected channel, CH16 and CH70.
Start or stopping scan
9) H/L
10) DUAL WATCH
)
c. MEM will be shown on the display.
d.
d
a. Press to select DSC call functions.
Individual Call and All Ships Call
b. Press and hold to select Radio Setup Menu or DSC Setup Menu.
11 CALL/SET
MATRIX
Quick Reference