Standart Furniture Bartoli DR 14080 User manual

PARTS LIST:
Description
No.
ATable Top 1 pc
Qty
B4 pcs
Step 1:
A
MDF CORNER
SUPPORT TABLE TOP
Step 1 : Turn Table top upside down and put on soft surface such as carpet or cloth and then take out wood
protect on table top using by Phillips screw driver (not included ).

Step 2:
Step 3:
Step 2: Attach Leg (2) to corner of Table top by using Flat Washer (3), Spring Washer (2), Hex nut (1) and
Open Wrench (4) (do not fully tighten).

PARTS LIST FOR TWO CHAIR:
Description
No.
1Chair back 2 pcs
Qty
2Seat cushion
3Front Leg 4 pcs
2 pcs
F
C
D
E
1
Step 1: Attach Seat cushion (2) to Chair back (1) by using the Flat washer (D), Lock washer (E),
Allen Bolt (C) and Allen Key (F) on back rail (do not fully tighten).
B
D
E
1
Step 2: Attach Seat cushion (2) to Chair back (1) by using the Flat washer (D), Lock washer (E),
Allen Bolt (B) and Allen Key (F) onto corner (do not fully tighten).

Step 4: Stick up the fabric to bottom of
Seat cushion (B). Step 5: Place Chair on flat surface and adjust legs so
that chair is level and does not wobble, tighten all the
bolts with Allen Key (F). Do not to over tighten.
2
3
2
Step 3: Attach the Front Leg to the corner of the seat frame by using Flat Washer (D), Lock Washer (E),
Allen bolt (A) and Allen Key (F).