Stansport 725 User manual

WARNING:
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC
This tent meets the flammability requirements of CPAI-84. The fabric may burn if
left in continuous contact with any flame source. The application of any foreign
substance to the tent fabric may render theflame-resistant properties ineffective
STORAGE
BAG
STAKE
TENT
TENT POLES
FLY POLE
PART
NAME
QTY
(PCS)
PARTITEM
A
B 1
C
E
F
2
1
6
1
ITEM# 725 / 725-15 / 725-100
DOME TENT
ASSEMBLY INSTRUCTION
This tent should be secured to the ground with stakes.
RAIN
FLY
D1
Notes:
If you need any help setting up your new tent, feel free to contact us.
EMAIL:
[email protected]
PHONE:
1 [phone]
SHOP:
stansport.com
2801 East 12th Street, Los Angeles, CA 90023

SCAN FOR
UNIVERSAL 2-POLE
DOME TENT
INSTRUCTION VIDEO
WATERPROOFING THE TENT
This tent is made from coated water repellent fabrics. However, the
sewing process necessary in all tent fabrication can cause water
leakage where the sewing needles have perforated the fabric in the
seams. Tent should be seam sealed to make it water tight. Seam sealer
can be located at your local outdoor outfitter or camping store. We
recommend sealing the outside of the floor and roof twice and the
inside once. When finished, let the tent stand and dry for a 6 to 12
hours before putting it away.
Stake down tent in windy weather, or if winds are anticipated.
Always place tent a safe distance from campfires. Unstaked tents placed
upwind of campfire can be blown into the fire. Tents placed downwind of the
fire are often showered with sparks that can burn holes in the lightweight
fabric of the tent.
A practice set-up is recommended before first use in a camping situation to
prevent any unforeseen difficulties.
Mildew is likely to form if a tent is rolled wet for more than a few days. Mildew
can cause delamination between fabric and waterproof coating or irreversible
staining. Prompt cleaning and drying is the only way to stop the growth of
mildew.
WARNING: Tent fabrics are flame retardant treated per CPAI-84. However, for
your safety, we recommend that no open flame be used in or near the tent.
WARNING:
ASSEMBLY INSTRUCTIONS
IMPORTANT: DO NOT USE EXCESSIVE FORCE DURING ANY PART OF SET-UP
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
Remove the tent, rain fly, and poles from the tent storage bag.
Spread the tent out on a flat surface with the tent floor against the ground.
Carefully assemble poles.
Straighten poles. Feed tent poles (A) through sleeves diagonally.
Insert pins from tent corners into tent pole end ferrules.
Spread fly out with fly pole pockets facing up.
Insert fly pole (B) into pockets and tie it down at center.
Pull fly over tent and hook corner bungees of rain fly to the fly loops
along tent side seams.
Secure the tent loops to the ground with the stakes.
Hook rain fly into rings at base of tent.
Place tent stake into ground.
2801 East 12th Street, Los Angeles, CA 90023 2801 East 12th Street, Los Angeles, CA 90023