STARKE ARVID 33100 User manual

Instructions for Use
Waste Skip
Version 1
05/10/07

General use and safety regulations:
• Check the lifting equipment before each lift.
• Maximum load must not be exceeded.
• Distribute the load evenly in the skip.
• Under no circumstances may a person be allowed under the load.
• Use the necessary safety equipment.
General maintenance and care instructions:
• All mobile parts must be greased once a month.
• Check all mobile parts as well as welding joints and other
material at least once a year.
• Remove any outer rust and coat with anti-corrosive paint.
• If the lifting rings are under ø 13 mm at the place of most wear,
these must be replaced.
• Check the lifting rings with crack indication spray.
• Replace worn parts.
• When unsure, contact Alia AB.
Dear Customer!
Thank you for choosing a STARKE ARVID® product.
We have more than 25 years of experience within the construction business. We develop,
manufacture and sell equipment intended for professional material management. Starke
Arvid´s product assortment includes a total of 20 different products.
Browse in at www.starkearvid.se

Lifting rings
Locking chain
Lifting yoke
Rear flap that
can be opened

3-part attachment
Lifting ring
Chain
Lifting yoke
Open rear flap Lifting ring

Alia AB
Box 93
SE-459 22 LJUNGSKILE Phone: [phone]
Fax: [phone]
offi[e-mail]
www.starkearvid.se
Waste Skip
Articlel no: 33100
Maximum load: 2500 kg
Width: 1340 mm
Length: 2400 mm
Total length flap incl.: 2460 mm
Heigth: 825 mm
Weight: 325 kg
Extra Equipment:
Rear side flap
Lifting yoke
Produced and
marketed by:
Technical Data
Service/Extra parts:
A number of retailers for STARKE ARVID® products are available for your basic security. If you have
any questions regarding service or extra parts turn to you nearest retailer or directly to ALIA AB.
Gaurantee:
Under the condition that all instructions for use have been followed,
we offer a one-year guarantee according to NL 01.
The product may not be modified by the user.