Starkey QUICKTIP User manual

Pairing
The Mini Remote Microphone must be paired to interact with compatible 2.4 GHz hearing aids on the Thrive platform.
Pairing occurs once, then the hearing aids and Mini Remote Microphone will automatically recognize each other.
The Mini Remote Microphone can be paired within Inspire X or outside of Inspire X.
Pairing within Inspire X
1Launch Inspire X, connect and detect hearing aids.
2Select Accessories on the left navigation bar.
3Ensure the Mini Remote Microphone is powered on.
4Place the hearing aids within six inches of the
Mini Remote Microphone.
5Place the Mini Remote Microphone in pairing mode by
double clicking the power button. The LED status
indicator will alternately blink blue and red.
6Select Pair to put the hearing aids into pairing mode. A
7Pairing is successful when the Mini Remote Microphone
image displays on the accessory screen. B
8Use the drop-down menu below the Streaming
Accessories box to set “Hearing Aid Mic While
Streaming.” Mic Reduced (50%) is the default. C
9Select the Information icon for pairing instructions,
if needed. D
Power Button
Status
Indicator LED
Microphone
MicroUSB Jack
Clip
Power On
Press the power button for three seconds
and release when the LED illuminates.
Power Off
Press the power button for two seconds
and release when the LED turns off.
A
B
CD
QUICKTIP
2.4 GHz Mini
Remote Microphone

Pairing (Continued)
Pairing outside of Inspire X
1Power off any mobile phone or other accessories
that were previously paired with the hearing aids.
2Ensure the Mini Remote Microphone is powered on.
3Power off, then power on the hearing aids
to place in pairing mode.
4Place the hearing aids within six inches
of the Mini Remote Microphone.
5Place the Mini Remote
Microphone in pairing mode
by double clicking the power
button. The LED status indicator
will alternately blink blue and red.
6A green LED will blink for each
hearing aid to confirm a successful pairing.
How it Works
The MiniRemoteMicrophone
allows the hearing aid
wearer to focus on a single
speaker when background
noise is present. While not
optimized as a general
purpose omni-directional microphone for tabletop
use, the Mini Remote Microphone may also provide
benefit for television watching. Place the Mini Remote
Microphone near the television speakers. To achieve
a comfortable listening level, adjust the Mini Remote
Microphone distance from the television speakers or
modify the audio streaming volume level.
To begin streaming from the
Mini Remote Microphone:
1Ensure the Mini Remote Microphone is powered on
by pressing the power button for three seconds.
2Streaming starts automatically in the hearing aids.
3When finished, power off the Mini
RemoteMicrophone to stop streaming.
Audio streaming will stop when:
• The Mini Remote Microphone is powered off.
• A Phone call is received via a direct mobile phone
stream into the hearing aids. After the phone call
concludes, all streaming stops. If desired, the
Mini Remote Microphone stream will need to
be manually restarted.
• If the user walks out of range of the Mini Remote
Microphone, up to 65 feet or 20 meters, streaming
stops and will need to be manually restarted.
x2
5

The Starkey logo, Thrive and Inspire are trademarks of Starkey Laboratories, Inc.
©2021 Starkey Laboratories, Inc. All Rights Reserved. 5/21 FLYR3529-02-EE-SC
Use
• The Mini Remote Microphone can be paired
to one set of 2.4 GHz hearing aids on the
Thrive platform.
• The Mini Remote Microphone can be clipped
to clothing or worn on a lanyard.
• The Mini Remote Microphone operating range
is up to 65 feet or 20 meters.
• Place the Mini Remote
Microphone close to the
audio source for optimal
results. The Mini Remote
Microphone should be
within eight inches (20 cm)
of the speaker’s mouth.
• The Mini Remote Microphone can stream
for up to 10 hours on a full charge.
• The Mini Remote Microphone reaches a full charge
in less than three hours and can reach a 50% charge
in approximately one hour.
• When the Mini Remote Microphone battery is low,
the LED status indicator will slowly pulse red and
an audible indicator tone will play in the hearing
aids every five minutes.
• The Mini Remote Microphone will momentarily
mute if dropped and will resume streaming
once the device is stabilized.
• Manually Start/Stop streaming via the hearing aid
user controls, the 2.4 GHz Remote, Thrive
Hearing Control app and/or power the
MiniRemoteMicrophone on or off.
• Stream Volume can be adjusted via the
Thrive app, the 2.4 GHz Remote and/or
the hearing aid user controls.