Starkey StarLink Remote Control 2.0 Assembly instructions

Lock/Unlock
LED Indicator
Light
Volume Up
Program Change
Volume Down
Favorite
Pairing
The Remote Control 2.0 must be paired to interact with compatible 2.4 GHz hearing aids on the Neuro Processor
and Thrive platforms. Pairing occurs once, then the hearing aids and Remote will automatically recognize each other.
The Remote can be paired within the fitting software or outside of the fitting software. Compatible 2.4 GHz hearing
aids on the Neuro Processor or Thrive platform can be paired with one Remote.
Pairing within Pro Fit
1Launch Pro Fit and connect hearing aids.
2Select Accessories from the Preparation Session
in Pro Fit or from the Flyout Menu .
3Ensure the Lock switch is in the Unlock (up) position.
4Place the hearing aids within six inches of the Remote.
5Place the Remote in pairing mode by pressing the
Favorite button for 5 seconds. The LED will rapidly blink.
6Select to put the hearing aids into pairing mode.
7Pairing is successful when the Remote image displays
on the accessory screen.
8Use the dropdown menu below the Remote image
to set the Favorite button configuration.
9Select pairing information for pairing instructions if needed.
Neuro + Thrive Platforms
QUICKTIP
StarLink Remote Control 2.0
6
7
8
9

Pairing (Continued)
Pairing within Inspire X
1Launch Inspire X, connect and detect hearing aids.
2Select Accessories on the left navigation bar.
3Ensure the Lock switch is in the Unlock (up) position.
4Place the hearing aids within six inches of the Remote.
5Place the Remote in pairing mode by pressing the
Favorite button for 5 seconds. The LED will rapidly blink.
6Select Pair to put the hearing aids into pairing mode.
7Pairing is successful when the remote image displays
on the accessory screen.
8Use the dropdown menu below the Remote image
to set the Favorite button configuration.
9Select the information icon for pairing instructions if needed.
Pairing outside of the software
1Power off any mobile phone or other accessories
that were previously paired with the hearing aids.
2Ensure the Lock switch is in the Unlock (up) position.
3Power off, then power on the hearing aids to place in pairing mode.
4Place the hearing aids within six inches of the Remote.
5Press the Favorite button for 5 seconds. The LED will rapidly blink.
6Once the LED turns solid for 2 seconds, both devices are paired.
The Remote will recognize if the fitting is monaural or binaural
and pair one or two devices accordingly.
Use
Volume: A short press of the arrows increases/decreases the volume. Streaming volume changes occur
when streaming audio from any of the 2.4 GHz streaming accessories and iOS or Android streams.
Program/Memory: Cycles through all programs assigned in the fitting software.
Lock/Unlock: Unlock to make remote adjustments, Lock to prevent unintentional changes and to preserve battery life.
6
7
8
9
2
6
5

Use (Continued)
Favorite Button: Activates the feature assigned to the Favorite button. The Favorite button is configured
within the fitting software and available options may include:
None: No effect on the hearing aids.
Home: Moves the hearing aids to the Personal/Normal program.
Stop/Start Audio Stream: Start or stop audio streaming from a 2.4 GHz streaming accessory.
Edge Mode+: Press to activate this feature designed to achieve the best sound instantly for the current
environment. Press again to deactivate this feature. *Neuro Processor hearing aids only
Comfort Boost: Press to optimize sound quality in noisy environments.
Press again to deactivate this feature. *Thrive Platform hearing aids only
Jump to Program/Memory 4: Moves the hearing aids to program 4.
Tinnitus Stimulus On/Off: Start or stop tinnitus stimulus in the hearing aids.
1Accessories only pair to hearing aid (not to iPhone/app). 2Double Tap feature only available on AI products.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Android is a trademark of Google, LLC.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license.
The Starkey logo, Edge Mode, Neuro Processor, Thrive, Inspire and Pro Fit are trademarks of Starkey Laboratories, Inc.
©2023 Starkey Laboratories, Inc. All Rights Reserved. 8/23 FLYR4139-00-EN-ST