StarTech.com USB32VGAEH User manual

Manual Revision: 03/18/2013
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
USB32VGAEH
USB 3.0 to VGA Video Adapter with
USB Hub Port
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
i
Table of Contents
Introduction ............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements .............................................................................................................................. 1
Installation ..............................................................................................3
Hardware Installation .............................................................................................................................. 4
USB HUB Installation (Optional) .......................................................................................................... 4
Multiple USB Video Adapter Installation .......................................................................................... 5
Conguring the USB Video Adapter ................................................................................................... 5
Display Settings ......................................................................................................................................... 6
Identify Monitors ...................................................................................................................................... 6
Multi-Display Control Panel .................................................................................................................. 7
Specications ..........................................................................................8
Technical Support ..................................................................................9
Warranty Information ............................................................................9

Instruction Manual
1
Introduction
The USB32VGAEH USB 3.0 to VGA® Adapter turns an available USB 3.0 port into a VGA
output port with high resolution 1920x1200 video support. The adapter features a
built-in 1-Port USB 3.0 hub, which oers a connection port in place of the USB port
used for connecting the VGA adapter – an ideal workaround for Ultrabook™ or laptop
users where only a limited number of USB ports are available.
The USB to VGA adapter functions as an external graphics card, providing a convenient
way to add multi-monitor capability to a USB 3.0-enabled desktop or laptop computer
(optimal performance from USB 3.0, backward compatible with USB 2.0).
Leveraging the high-bandwidth (5 Gbps) SuperSpeed USB 3.0 interface, the adapter
delivers smooth, high-denition content to your VGA display / projector. The adapter
can be used to mirror your primary desktop, showing the same image on each display,
or to extend your desktop to double your workspace and increase your productivity.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Packaging Contents
• 1x USB 3.0 to VGA Adapter
• 1x Software CD
• 1x Manual
System Requirements
• USB enabled computer system with available USB 3.0 or 2.0 port
• CPU: Quad Core 2.4GHz or Higher (i5 recommended)
• RAM: 4GB or higher
• Microsoft® 7(32/64-bit) 8(32/64-bit)

Instruction Manual
2
Front Back
Example: External USB device
attached to pass-through port
of USB32DVIEH
*actual product may vary from photos

Instruction Manual
3
Installation
Driver Installation
Please ensure that the driver installation is complete prior to the physical installation
(plugging in) of the USB 3.0 Video Adapter
1. Download the latest drivers from the StarTech.com website (recommended), or
insert the included Driver CD into your CD/DVD-ROM drive.
2. Locate the Setup.exe application. This le will be located in the root directory of the
Driver CD (e.g. D:\) or downloaded le.
3. Executing the Setup.exe application will launch the following screen. Please click
Next > to start installation process. The set-up program will install the device driver
and software application respectively.
NOTE: Ensure that the USB Video Adapter is not connected to the host computer.
4. Once Windows has nished the driver installation, it will prompt you to restart the
computer. Select “Yes, I want to restart my computer now”, and click the
“Finish” button.

Instruction Manual
4
Hardware Installation
1. Once the computer has restarted connect your USB32VGAEH device via the USB
cable to your PC.
2. The system will initiate driver and software application (screen may ash or go black
during the install).
3. Connect your VGA monitor to the available VGA port on the USB32VGAEH device.
4. The USB Video Adapter is now ready for use.
USB HUB Installation (Optional)
This device includes a 1 port USB 3.0 hub to replace the port taken up by the device.
NOTE: If the USB display adapter is connected to a USB 2.0 host port, the hub will only
operate at USB 2.0 speeds.
1. Ensure the Hardware Installation steps have been completed. USB Hub drivers will
install as part of the installation when device is connected.
2. Connect the USB A type cable from your desired USB device to USB female port on
the Display adapter.
3. Follow any installation steps for the device connected.

Instruction Manual
5
Multiple USB Video Adapter Installation
Ensure you have the latest version of the drivers installed, otherwise, please download
them from the StarTech.com website (www.startech.com).
1. Complete the standard driver installation steps, up to when you plug in the rst USB
Video Adapter.
2. Connect another monitor/display to the second USB Video Adapter, and turn on
the display.
3. Connect the USB type A connector on the second USB Video Adapter to an available
USB 3.0 port on the host computer. The driver installation will begin automatically.
Repeat these steps for each additional USB Video Adapter you wish to install. Once all
USB Video Adapters are installed, reboot the computer. After rebooting, you may be
prompted to reboot one nal time; please do so.
Conguring the USB Video Adapter
Look for the “USB Video Adapter” icon ( ) on your Windows System Tray (next
to Clock). Right-click this icon to congure the adapter using the options explained in
detail below.

Instruction Manual
6
Display Settings
Quick access to the Windows® “Display Settings” window.
This option allows you to use the Windows® native Display Settings to adjust all
settings including: Resolution, monitor placement, and choose whether the additional
will extend or mirror the main display.
Identify Monitors
This option displays the identication number assigned by Windows® to dierentiate
between each monitor. Using an easy to read overlay this number is displayed in the
upper right corner of each monitor.

Instruction Manual
7
Multi-Display Control Panel
This unique feature allows for quicker and simpler management of a multi-display
environment using a series of hotkeys to quickly move the active program window to
the desired display (either on-board or each USB Video Adapter).
The default setting of the hotkeys can be found in the Hotkey List of “Multi-Display
Control Panel”.
Example: Ctrl + 2 means: to move the window to Display 2