StarTech.com USB32VGAPRO User manual

Manual Revision: 05/28/2014
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
USB32VGAPRO / USB32HDPRO / USB32DVIPRO
USB 3.0 to VGA External Video Card
USB 3.0 to HDMI External Video Card
USB 3.0 to DVI External Video Card
Note: Computer systems running Windows® 7 or higher will install software and drivers
automatically upon connecting the USB Display Adapter. If your computer system is running
a previous versions of Windows or any version of Mac OSX®, please ensure the software has
been installed before the USB Display Adapter is connected (See Installation).

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
i
Table of Contents
Introduction............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements.............................................................................................................................. 1
Installation ..............................................................................................2
Windows Installation ............................................................................................................................... 2
Mac OSX Installation................................................................................................................................ 3
Multiple USB Video Adapter Installation .......................................................................................... 4
Conguring the USB Video Adapter....................................................5
Windows®..................................................................................................................................................... 5
Mac OSX ....................................................................................................................................................... 8
Specications..........................................................................................10
Technical Support ..................................................................................11
Warranty Information............................................................................11

Instruction Manual
1
Introduction
Packaging Contents
• 1x USB 3.0 Video Adapter
• 1x Driver/Software CD
• 1x Instruction Manual
• 1x DVI-to-VGA Adapter (for USB32DVIPRO only)
System Requirements
• VGA-enabled display (e.g. Monitor, Projector, Television) (for USB2VGAPRO)
Or
HDMI-enabled display (e.g. Projector, Television) (for USB2HDPRO)
Or
DVI-enabled display (e.g. Monitor, Projector) (for USB2DVIPRO)
• USB-enabled computer system with available USB 3.0 or 2.0 port
Note: These USB Display Adapters perform best when using a USB 3.0 port.
• Microsoft® Windows 8/8.1 (32/64-bit), 7(32/64-bit), Vista(32/64-bit), or Mac OSX®
• CPU: Quad Core 2.4GHz or Higher (i5 recommended)
• RAM: 4GB or higher

Instruction Manual
2
Installation
Windows Installation
Computer systems running Windows® 7 or higher will install software and drivers
automatically upon connecting the USB Display Adapter. If your computer system is
running a previous versions of Windows please ensure the software and drivers have
been installed before the USB Display Adapter is connected (Installation steps below).
Note: If your computer system is running Windows 7 or higher please proceed to step
4, as steps 1 - 3 are not required.
1. Download the latest drivers from the StarTech.com website (recommended), or
insert the included Driver CD into your CD/DVD-ROM drive.
2. Locate the Setup application le (Setup.exe). This le will be located in the root
directory of the Driver CD (e.g. D:\) or downloaded le.
3. Executing the Setup.exe application will launch the installation wizard. Please
click armatively on each of the subsequent installation screens to complete the
installation. The Install wizard will vary for dierent versions of Windows. The set-up
program will install the device driver and software application once completed.
Note: The screen may ash or go black during installation. No additional message will
be displayed to alert that the installation has completed.

Instruction Manual
3
4. Once DisplayLink Core Software screen has disappeared Connect your USB Video
Adapter via the USB cable to your PC.
5. The system will initiate driver and software application (the DisplayLink Software
Conguration screen may ash or go black during the install).
Note: Some machines may require a system reboot for the USB Display Adapter
to initialize.
6. Connect the video cable from your VGA or HDMI display to the VGA (USB32VGAPRO) or
HDMI (USB32HDPRO) port on the USB Display Adapter.
The USB Video Adapter is now ready for use.
Mac OSX Installation
Note: Please ensure the software has been installed before the USB Display Adapter
is connected to your Mac (Installation steps below).
1. Insert the Driver CD (included) into the CD/DVD-ROM drive.
2. Browse through the Driver CD and locate the DisplayLink Installer le
(DisplayLink-OSX.dmg).
3. Double-click the DisplayLink Installer le (DisplayLink-OSX.dmg) to begin the
installation process.

Instruction Manual
4
4. Please ensure you have saved any unsaved les and click the “Restart” button.
5. After the computer has restarted, plug in the USB Display Adapter to an available
USB port. The adapter should now be ready to use.
Note: If you wish to add additional USB Display Adapters, simply plug them into
available USB ports. A maximum total of 4 USB Display Adapters can be used on a
computer.
Multiple USB Video Adapter Installation
Ensure you have the latest version of the drivers installed; otherwise, please download
them from the StarTech.com website (www.startech.com).
1. Complete the standard driver installation steps up to the point of connecting the
rst USB Video Adapter.
2. Connect another monitor/display to the second USB Video Adapter, and turn on the display.
3. Connect the USB connector on the second USB Video Adapter to an available USB
port on the host computer. The driver installation will begin automatically.
Repeat these steps for each additional USB Video Adapter you wish to install. Once all
USB Video Adapters are installed, reboot the computer. After rebooting, you may be
prompted to reboot one nal time; please do so.

Instruction Manual
5
Conguring the USB Video Adapter
Windows®
When devices are attached, an icon appears in the taskbar. This gives you access to the
DisplayLink manager menu.
1. From the taskbar, click the Show hidden icons arrow to show all available icons.
2. Click the DisplayLink icon to open the congurable options menu. A description for
each congurable option is listed below.
DisplayLink Manager

Instruction Manual
6
Extend
When“Extend”is selected, the monitor attached to the USB Display Adapter displays
an extension of the user’s active Windows desktop. The extra desktop area is a great
productivity aid, allowing more applications or documents to be visible simultaneously.
You can access applications on each monitor, by simply moving your curser, or dragging
applications from one screen to another.
Mirror
When “Mirror” is selected, the USB Display Adapter duplicates the primary display
on the attached monitor.
Note: The display settings will be duplicated for all attached monitors
(including resolution, color depth, and refresh rate); however, your system will
default all connected monitors to the display settings of the monitor with the
lowest specications.
USB Cable
USB Display
Adapter
Video Cable
PC / NB
LCD / Monitor
USB Cable
USB Display
Adapter
Video Cable
PC / NB
LCD / Monitor

Instruction Manual
7
Extend To
When selecting “Extend To,” you can dene the physical location of the monitor
attached to the USB Display Adapter in relation to your primary monitor. Once the
physical location has been dened, you can move your mouse curser from one screen
to another in the logical location that the monitors are physically positioned.
To adjust the layout of the connected monitor(s), select “Extend To” from the options
menu in the DisplayLink Manager. Next, select a direction (UP/DOWN/RIGHT/LEFT)
to change the orientation of the connected monitor(s) to your desired layout.
Screen Resolution
This option allows you to change the resolution on the monitor connected to the
USB Graphics Adapter. Simply select the desired option from the list of supported
resolutions displayed in the sub menu.
Screen Rotation
This option allows you to change orientation in which the screen is viewed. The two
most common types of orientation are portrait and landscape.
Set as Main Monitor
Selecting this option allows your computer to consider the monitor connected
through the USB Graphics Adapter as your primary monitor. Your primary monitor
displays all system notications, and takes priority with applications.
Notebook Monitor O
Selecting this option disables the onboard system monitor. Please note this will disable
the monitor on a desktop or notebook computer.
O
This option disables the monitor connected to the USB Graphics Adapter.