StarTech.com 2SD4FCRU3C User manual

Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 07/05/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/2SD4FCRU3C.
Packaging contents
• 1 x dual-slot SD™ card reader
• 1 x quick-start guide
System requirements
This converter is OS independent and doesn’t require any additional
drivers or software.
System requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/2SDFCRU3C.
2SD4FCRU3C
Dual-Slot SD Card Reader - USB 3.0 with USB-C - SD 4.0, UHS II
*actual product may vary from photos
Important: Read and understand the entire manual
before you use this product, and follow the instructions
as they are outlined in the manual.
Failure to do so could result in property damage or device
failure.
Introduction
You can use the 2SD4FCRU3C to simultaneously access one or two
SD, SDHC™ (Secure Digital High Capacity), or SDXC™ (Secure Digital
Extended Capacity) cards, and leverage read and write functionality
for les such as documents, spreadsheets, slide shows, images,
videos, and music. The 2SD4FCRU3C delivers USB 3.0 performance,
which provides transfer speeds up to 5Gbps. The 2SD4FCRU3C
also features an integrated USB-C™ cable for added protection and
increased portability.
Product diagram
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps.
Use the SD card reader
To access the data stored on your SD card or cards, complete the
following:
1. Hold the SD card so that the label is facing up and insert your SD
card into Slot 1 on the 2SD4FCRU3C.
2. If necessary, insert a second SD card into Slot 2 on the
2SD4FCRU3C.
3. Connect the integrated USB-C connector on the 2SD4FCRU3C to
the USB port on your host device.
4. Access the data that’s stored on the SD card or cards.
Connect an auxiliary power source
If you require additional power when you use the 2SD4FCRU3C,
connect the USB cable on your power source to the AUX Micro-B
power port on the 2SD4FCRU3C.
USB-C connector
Slot 1
Slot 2
AUX Micro-B
power port

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one-year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.