StarTech.com PEX4S952LP User manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 09/15/2014
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1 x PEX4S952 or PEX4S952LP card
• 1 x 4 port DB9 break-out cable
• 1 x Full Prole bracket (PEX4S952LP only)
• 1 x Low Prole bracket (PEX4S952 only)
• 1 x User Manual
• 1 x Driver CD
System Requirements
• PCI Express enabled computer system
• Windows® 2000/ XP(32/64bit)/ Server 2003(32/64bit)/
Vista(32/64bit), and Linux
Installation
WARNING! PCI Express cards, like all computer equipment, can be
severely damaged by static electricity. Be sure that you are properly
grounded before opening your computer case or touching your PCI
Express card. StarTech.com recommends that you wear an anti-
static strap when installing any computer component. If an anti-
static strap is unavailable, discharge yourself of any static electricity
build-up by touching a large grounded metal surface (such as the
computer case) for several seconds. Also be careful to handle the PCI
Express card by its edges and not the gold connectors.
Setting Power Mode
This card is specially designed to allow for power output from the
ninth pin of the DB9 connector(s) for devices that support power
over serial. This card allows users to set each port with 5V, 12V, or RI
(no power) via jumper settings on the card. Users can also choose to
draw the necessary power directly from the system power supply by
connecting the LP4 molex power connector.
Hardware Installation
1. Turn your computer o and any peripherals connected to the
computer (ie. Printers, external hard drives, etc.). Unplug the
power cable from the rear of the power supply on the back of
the computer.
2. Remove the cover from the computer case. Refer to
documentation of your computer system for details.
3. Locate an open PCI Express slot and remove the metal cover plate
on the rear of the computer case. Note that this card will work in
PCI Express slots of additional lanes (ie. x4, x8 or x16 slots)
4. Insert the card into the open PCI Express slot and fasten the
bracket to the rear of the case.
OPTIONAL: If supplying power from the computer system’s power
supply, (see “Setting Power Mode”) connect the LP4 molex plug into
the card.
5. Place the cover back onto the computer.
6. Insert the power cable into the socket on the power supply.
PEX4S952 / PEX4S952LP
4 Port PCI Express RS232 Serial Card with 16950 UART
*actual product may vary from photos
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per StarTech.com
PEX4S952LP o cerca il tuo prodotto tra le migliori offerte diAltre Schede

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a lifetime warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Driver Installation
Windows®2000/XP/Server 2003
1. When the Found New Hardware wizard appears on the screen,
insert the Driver CD into your CD-ROM drive. If you are prompted
to connect to Windows Update, please select the “No, not this
time”option and click Next.
2. Select the option “Install Drivers Automatically (Recommended)”
and then click the Next button.
3. Windows should now start searching for the drivers. Once this
has completed, click the Finish button.
Windows®Vista
1. When the Found New Hardware window appears on the screen,
click on the “Locate and install drivers software (recommended)”
option. If prompted to search online, select the“Don’t search
online” option.
2. When prompted to insert the disc, insert the Driver CD that
came with the card, into your CD-ROM drive and Windows will
automatically proceed to search the CD.
3. If a Windows Security dialog window appears, click the “Install this
driver software anyway” option to proceed.
4. Once the driver is installed, click the Close button.
Verifying Installation
Windows®2000/XP/Server 2003/Vista
1. From the main desktop, right-click on My Computer, then select
Manage.
2. In the new Computer Management window, select Device
Manager from the left window panel.
3. Double-click on Ports (COM & LPT) option. The appropriate
number of additional COM ports should be visible. The ports are
ready to connect to new devices.
Specications
PEX4S952 / PEX4S952LP
Bus Interface PCI Express x1 (base spec 1.1)
Chipset Oxford OXPCIe954
UART 16C950
External Connectors 4 x DB-9 male
Internal Connectors 1 x LP4 molex
Maximum Data Transfer
Rate 460 Kbps
Supported Protocol RS-232
Compatible Operating
Systems
Windows®2000/XP/Server 2003/Vista,
Linux®Kernel 2.4.x/2.6.x