StarTech.com ARMBARDUO User manual

Manual Revision: 04/23/2019
User Manual
For the latest information and specications visit
www.startech.com/ARMBARDUO
Desk Stand for Dual Monitors
Actual product may vary from photos
SKU#: ARMBARDUO

1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.

2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Make sure that you assemble this product according to the instructions.
• Do not exceed the weight capacity of this product. Overloading this product
might result in injury or property damage. This product can support the
following weight: 35.2 lb. (16 kg).
• This product is intended for indoor use only and should not be used
outdoors.
• The mounting hardware included with this product might not be adequate
for some wall structures. If you lack the necessary expertise to attach this
product to the wall structure that you’re using, contact a construction
professional to install the wall mount or to provide specic mounting
instructions for your wall structure.
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna.
• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan
orsaka skada på person eller egendom. Denna produkt har stöd för följande
vikter: 16 kg.
• Produkten är endast avsedd för användning inomhus och ska inte användas
utomhus.
• Monteringsutrustningen som medföljer produkten kanske inte är lämplig
för vissa väggstrukturer. Om du saknar nödvändiga kunskaper för att
fästa denna produkt på väggstrukturen som du använder, kontakta en
professionell konstruktör för att installera väggmonteringen eller för att ge
specika monteringsinstruktioner för din väggstruktur.
Avertissements
• Assemblez ce produit conformément aux instructions.
• Ne dépassez pas la capacité pondérale du produit. Une surcharge du produit
peut entraîner des blessures ou des dommages matériels. Ce produit peut
supporter 16 kg.
• Ce produit est uniquement destiné à une utilisation en intérieur et ne doit
pas être utilisé à l’extérieur.
• Le matériel de xation inclus avec ce produit n’est pas forcément approprié
pour toutes les structures de murs. Si vous ne disposez pas des compétences
nécessaires pour installer ce produit au mur, contactez un professionnel
an qu’il installe le support mural ou qu’il vous fournisse les instructions de
montage spéciques à votre structure de mur.

3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warnhinweise
• Beachten Sie bei der Montage dieses Produkts die Montageanweisungen.
• Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses
Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen.
Dieses Produkt ist für folgendes Gewicht geeignet: 16 kg.
• Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte
nicht im Freien verwendet werden.
• Das mitgelieferte Montagematerial ist möglicherweise nicht für jede Wand
geeignet. Wenn Ihnen die nötigen Fachkenntnisse zum Anbringen dieses
Produkts an einer Wand fehlen, lassen Sie einen Fachmann den Wandhalter
anbringen, oder lassen Sie sich von einem Fachmann Montageanweisungen
für Ihre Wand erteilen.
Dichiarazioni di avvertenza
• Assicurarsi di Assemblare il prodotto secondo le istruzioni.
• Non superare la capacità di carico del prodotto. Il sovraccarico del prodotto
potrebbe causare danni o lesioni. Il prodotto è in grado di supportare i
seguenti pesi: 16 kg.
• Il prodotto è destinato all’uso in ambienti interni. Se ne sconsiglia l’impiego
in ambienti esterni.
• L’hardware di montaggio incluso con il prodotto potrebbe non essere
adeguato ad alcune strutture murarie. Se l’utente non dispone delle
competenze necessarie per agganciare il prodotto alla struttura muraria
in uso, dovrà contattare un professionista edile per installare il supporto a
parete o ottenere istruzioni di montaggio per la struttura muraria in uso.
Mensagens de aviso
• Certique-se de que monta este produto de acordo com as instruções.
• Não exceda a capacidade de peso deste produto. Sobrecarregar este produto
pode resultar em ferimentos ou danos de propriedade. Este produto pode
suportar o seguinte peso: 16 kg.
• Este produto destina-se apenas a uma utilização no interior e não deve ser
utilizado no exterior.
• Este produto requer uma ligação à terra. Não utilize este produto sem uma
ligação à terra.

4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• O hardware de montagem incluído com este produto pode não ser
adequado para algumas estruturas de parede. Se não tiver o conhecimento
necessário para xar este produto à estrutura de parede que está a usar,
contacte um prossional de construção para fazer a instalação em parede ou
para fornecer instruções de montagem especícas para a sua estrutura de
parede.
Advertencias de uso
• Asegúrese de ensamblar este producto según las instrucciones.
• Asegúrese de no exceder la capacidad de peso de este producto. La
sobrecarga de este producto puede causar lesiones personales o daños en la
propiedad. Este producto tiene capicidad para el siguiente peso: 16 kg.
• El uso de este producto es solo para interiores y no debe utilizarse en
exteriores.
• El hardware de montaje incluido con este producto puede no ser adecuado
para algunas estructuras de pared. Si no tiene la experiencia suciente para
jar este producto a la estructura de la pared correspondiente, póngase en
contacto con un profesional de la construcción para instalar el soporte de
pared o para que le proporcione las instrucciones especícas de montaje
para su estructura de pared.
Waarschuwingen
• Zorg dat u dit product volgens de instructies in elkaar zet.
• Overschrijd de maximale capaciteit van dit product niet. Overbelasting
van dit product kan letsel of materiële schade veroorzaken. Dit product
ondersteunt het volgende gewicht: 16 kg.
• Dit product is alleen bedoeld voor binnengebruik en mag niet buiten
worden gebruikt.
• De bij dit product geleverde montagemiddelen kunnen niet geschikt zijn
voor sommige wandstructuren. Als u onvoldoende kennis hebt om dit
product aan de door u gebruikte wandstructuur te bevestigen, neem dan
contact op met een bouwkundige om de steun aan de muur te installeren of
specieke montage-instructies voor uw wandstructuur te geven.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載重量をオーバーした
場合、怪我をする恐れや器物破損の恐れがあります。 本製品は、モニター1台あたり16kgまで支
持できます。

5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。
• 本製品に同梱されている取付け金具は、ご使用になる壁の構造に対して十分ではない場合があ
ります。本製品を壁面に取り付ける時、十分な専門知識が不足していると判断された場合、専門業
者に連絡を取って、本製品の取り付けを行ってもらうか、お客様の壁の構造に適した取り付け方
法を教えてもらってから取り付けを行って下さい。
Safety Statements
Safety Measures
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し
を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di sicurezza
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Warning Statements ..............................................................................2
Safety Statements..................................................................................5
Product Diagram ....................................................................................7
Front View.................................................................................................................................................... 7
Product Dimensions ..............................................................................8
Product Information ..............................................................................9
Package Contents ..................................................................................................................................... 9
Assembly .................................................................................................12
Assembling the Base................................................................................................................................ 12
Attaching the Crossbar ........................................................................................................................... 13
Adjusting the Monitor Plates................................................................................................................ 14
Attaching the Monitors - Flush Installation..................................................................................... 16
Attaching the Monitors - Recessed Installation ............................................................................ 17
Adjusting the Monitors .........................................................................19
Tilt Adjustment .......................................................................................................................................... 19
Swivel Adjustment.................................................................................................................................... 19
Tightening the VESA Mount.................................................................................................................. 20
Routing the Cables.................................................................................20

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
1Crossbar 5Height Adjustment Ring
2VESA Monitor Mounts (x 2) 6Cable-Management Clip
3Pole 7Baseplate
4Crossbar Cable-
Management Clip
1
23
4
7
6
5

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions

9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
Pole
Qty: One
Baseplate
Qty: One
M6x15 mm Screws
Qty: Three
Cable-Management Clip
Qty: One

10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Pole Cap
Qty: One
Height Adjustment Ring
Qty: One
Crossbar
Qty: One
VESA Monitor Mount
Qty: Two
M4x12 mm Screw
Qty: Eight
M4x30 mm Screw
Eight

11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Plastic Spacers
Qty: Eight
M3 Hex Key
Qty: One
M4 Hex Key
Qty: One
Cable-Management Clips
Qty: Two

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Assembly
Warning! Make sure that all of the hardware is assembled
securely and checked for stability before you install the moni-
tors.
Assembling the Base
1. Insert the three M6x15 mm Screws through the three holes
in the Baseplate and into the Pole.
Inserting the M6x15 mm Screws into the Baseplate
2. Using the M4 Hex Key, turn the M6x15 mm Screws
clockwise to tighten them.

13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching the Crossbar
1. Slide the Height-Adjustment Ring down the Pole to the
height that you want the monitors to be at.
2. Press the lever on the Height-Adjustment Ring to tighten it
and prevent it from sliding down the pole.
3. Slide the Crossbar down the Pole so that it sits on the
Height-Adjustment Ring.
4. Push the Pole Cap down onto the top of the Pole.
Attaching the Crossbar Assembly
5. Using the M3 Hex Key, turn the screw in the crossbar
clockwise to tighten it and prevent the crossbar from
moving

14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Tightening the Crossbar
Adjusting the Monitor Plates
1. Loosen the Plates on the Crossbar, by turning the Thumb
Screws at the bottom of the plates counterclockwise.

15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Loosening the Plates
2. Move the Plates right and left until the Plates are in the
desired position.
Moving the Plates Left and Right
3. When the Plates are in the desired position, turn the Thumb
Screws at the bottom of the plates clockwise to lock the
Plates in place.
4. To move the Plates up or down, turn the Thumb Screws at
the top of the Plates counterclockwise or clockwise.

16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Moving the Plates Up and Down
Attaching the Monitors - Flush Installation
Warnings! The Desk Stand is designed to display two moni-
tors between 15 and 24 inches in size. The maximum weight
capacity of the Desk Stand is a total of 35.2 lb. (16 kg), with
each monitor mount able to hold 17.6 lb. (8 kg).
To prevent scratching during the installation process, you
should handle the surface of the Monitors with care.
1. Insert four of the M4x12 mm Screws through the VESA
Monitor Mount and into the Mounting Holes on the back
of the Monitor.
2. Use a Phillips Screwdriver to tighten the screws.
3. Repeat steps 1 - 2 to install the second Monitor.

17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the VESA Monitor Mount - Flush Installation
4. Slide each of the VESA Monitor Mounts onto the Plates on
the Crossbar.
5. Turn the screw on the side of each of the VESA Monitor
Mounts clockwise to tighten the VESA Monitor Mounts in
place.
Attaching the Monitors - Recessed Installation
1. Insert four of the M4x30 mm Screws through the VESA
Monitor Mount, into four of the Plastic Spacers, and into
the Mounting Holes on the back of the Monitor.
2. Use a Phillips Screwdriver to tighten the screws.
3. Repeat steps 1 - 2 to install the second Monitor.

18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the VESA Monitor Mount - Recessed Installation
4. Slide each of the VESA Monitor Mounts onto the Plates on
the Crossbar.
5. Turn the screw on the side of each of the VESA Monitor
Mounts clockwise to tighten the VESA Monitor Mounts in
place.

19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjusting the Monitors
Tilt Adjustment
The Monitors can be tilted to commodate dierent viewing
angels (15 degrees downward or upward).
• Place both of your hands on either side of the Monitor
and apply light pressure either downward or upward. The
Monitor will tilt to a maximum of 15 degrees in either
direction.
Monitor Adjustment
Swivel Adjustment
The Monitors can be adjusted on a 360 degree swivel.
• Place both of your hands on either side of the Monitor and
apply light pressure either left or right. The Monitor will
swivel 360 degrees.