StarTech.com MNRISERCLMP Quick start guide

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: August 13, 2019 11:31 AM
Product Diagram (MNRISERCLMP)
Component Function
1Monitor Platform • Used to support the Monitor.
2Legs (x 2) • Used to support the Monitor Riser.
3Clamps (x 2) • Used to secure the Monitor Riser to the edge
of the surface.
4Thumb Screws (x 2) • Used to secure the Monitor Riser to the edge
of the surface.
Requirements
For the latest requirements, please visit www.startech.com/MNRISERCLMP
• Suitable Mounting Surface x 1
Package Contents
• Monitor Platform x 1
• Desk Clamp Assemblies x 2
• Hex Key x 1
• Screws x 4
• Washers x 4
Assembling the Monitor Riser
1. Place the Monitor Platform screw-hole side facing upwards on a at, stable surface.
Desk Clamp Monitor Riser
2. Align the Screw Holes (x 2) on the Clamp Assembly with the Mounting Holes (x
2) on the bottom of the Monitor Platform. When aligning the Clamp Assembly
with the Mounting Holes, the back of the Clamp Assembly should be closest to the
edge of the Monitor Platform.
Assembling the Monitor Riser
3. Align the Washers (x 2) with the Screw Holes on the Clamp Assembly.
4. Insert the Screws (x 2) through the Washers and Clamp Assembly and into the
Monitor Platform.
5. Using the Hex Key (included) tighten the Screws, being careful not to over-tighten.
6. Repeat steps 2 - 5 to install the second Clamp Assembly to the Monitor Platform.
Installing the Monitor Riser
The Monitor Riser can support one monitor with a maximum screen size of 812 mm
(32”).
1. Align the Clamp Assemblies with the edge of the surface
2. Slide the Clamp Assemblies over the edge of the surface.
3. Using the Thumb Screw, tighten the Clamp until the Clamp is pressed tightly
against the surface.
1
2
3
4

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Product Specications
Type of Measurement Measurement
Weight Capacity
kg
20 kg. (44 lb.)
Product Dimensions