StarTech.com PRESREMOTE User manual

Volume down
button
Product overview
Front view
Quick-start guide
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 10/13/2021
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/PRESREMOTE
Packaging contents
• 1 x presentation remote
• 2 x AAA batteries
• 1 x carrying case
• 1 x quick-start guide
Requirements
• A computer with a USB port.
Note: This presentation remote uses generic HID drivers and
is commonly supported on virtually all operating systems. No
additional software or drivers are required.
PRESREMOTE
Wireless Presentation Remote with Laser Pointer - 90 ft.
*actualproductmayvaryfromphotos
Side view
Battery bay
ATTENTION!
Class 2 Laser Product
LASER RADIATION
DO NOT STARE INTO BEAM
WAVELENGTH: 650±20nm
Max optical power: 1mW
Battery installation
1. Press down on the battery bay and slide the cover away to reveal
the battery compartment.
2. Insert the included batteries, ensuring the positive (+) and
negative (-) ends of the batteries match the polarity indicators
inside the compartment.
3. Once the batteries are installed, replace the cover by sliding it
back into place.
Play / ESC button Blank button
Next button
Last button
Laser pointer button
USB wireless receiver
and storage slot
Activity LED
Tab button Enter button
Volume up
button
Connect the remote to your computer
1. Remove the USB wireless receiver from the storage slot.
2. Connect the wireless receiver to a USB port on your computer.

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15, subpart C of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15, subpart C of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Changes or
modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
FCC-ID : 2AAQO-R4002
IC-ID : 11232A-PRESREMOTEG
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
HVIN: PRESREMOTEGV3
IC Radiation Exposure Statement
This equipment complies with IC RSS-210 radiation exposure limit set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 0.5cm between
the radiator and your body.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide
industry-leading solutions. If you ever need help with your product, visit www.startech.com/
support and access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods
noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and
labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,
directors, employees or agents) for any damages (whether direct or indirect, special, punitive,
incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,
arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If
such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Button Operation
Starts or ends your presentation.
Turns your presenting screen o or on, during
your presentation.
Activates the laser pointer while pressed (this
button does not interact with any software
applications).
Moves to the next action in your presentation,
including animations, transitions and slides.
Moves to the previous action in your
presentation, including animations, transitions
and slides.
Cycles through controls throughout the
Powerpoint application for intuitive selection.
Emulates the Enter (Return) button on your
keyboard, initiating animations, transitions
while viewing the slide or selecting controls
throughout the application.
Turns your computer volume up.
Turns your computer volume down.
Buttons
The buttons on this presentation remote enable dierent controls
within slide-based presentation applications such as PowerPoint™.
Review the table to the right, as it outlines the functionality of each
button.
Notes:
• Within other applications that are not intended for
presentations, such as word processing or spreadsheet
software, functionality of each button will vary.
• To conserve battery power, the laser button ( ) will not
operate until the USB wireless receiver has been removed
from the storage slot.
Activity LED
This presentation remote has an activity LED that lights up when any
button is pushed..
Note: The activity LED will not operate until the USB wireless
receiver has been removed from its storage slot.
Déclaration d’exposition à la radiation
Cet équipement respecte les limites d’exposition aux rayonnements IC dénies pour un environnement
non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de 0.5 cm qui
sépare l’élément rayonnant de votre corps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à leur
proximité.
FCC ID:2AAQO-R400
IC:11232A-PRESREMOTE
The Country Code Selection feature is disabled for products marketed in the US/Canada
The device, for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
Use of Trademarks, Registered Trademarks, and other Protected Names
and Symbols
PowerPoint is a registered trademark of Microsoft® registered in the U.S. and other countries. This
manual may make reference to trademarks, registered trademarks, and other protected names
and/or symbols of third-party companies not related in any way to StarTech.com. Where they
occur these references are for illustrative purposes only and do not represent an endorsement of
a product or service by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct acknowledgement
elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks,
registered trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Other StarTech.com Remote Control manuals