StarTech.com PRESREMOTEG User manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram (PRESREMOTEG)
Button/LED Function
1LED Indicator
Indicates remote activity, lights up when buttons on the
Remote are pressed.
Notes: The USB Wireless Receiver must be removed
from the remote for the LED Indicator to work.
The LED Indicator will ash when the batteries need to
be replaced.
2Play/ESC
Starts or ends the presentation within compatible
software.
Used as the Back button when in menus.
Used as the zoom out function when zoomed in.
3Last Moves to the previous action. (animations, transitions,
slides, etc.).
Wireless Presentation Remote with Green Laser Pointer
1
Button/LED Function
4Tab
Cycles through on-screen elements.
Note: When not presenting, the Tab Button cycles
through screen elements on the screen the mouse
indicator is located.
5Laser
Activates the Laser Pointer.
Note: The USB Wireless Receiver must be removed
from the remote for the Laser Pointer to work.
6USB Wireless
Receiver Connects the Remote to the Host Computer.
7Volume Up Turns the Host Computer’s volume up.
8Volume Down Turns the Host Computer’s volume down
9Blank Turns the screen O/On.
10 Next Moves to the Next action (animations, transitions,
slides, etc.).
11 Enter Emulates the Enter/Return button on a keyboard.
Requirements
For the latest requirements, please visit www.startech.com/PRESREMOTEG.
• Host Computer with USB-A Port.
Battery Installation
1. Press down on the Battery Bay and slide the Battery Cover away to reveal the
Battery Compartment.
2. Insert two AAA Batteries (included), aligning the positive (+) and negative (-) ends
of the batteries with the indicators inside the Battery Compartment.
3. Align the Battery Cover on the back of the Remote and slide it back into place.
Connecting the Remote
1. Remove the USB Wireless Receiver from the Storage Slot on the bottom of the
Remote.
2. Connect the USB Wireless Receiver to a USB-A Port on the Host Computer.
Note: The Remote will appear as 2.4G PRESENTER in system menus on the Host
Computer.
ATTENTION!
DO NOT STARE INTO BEAM
DO NOT POINT AT AIRCRAFT
Class 2 Laser Product
LASER RADIATION
WAVELENGTH: 532 ± 10nm
Max optical power: 1mW
234 6
10
9
78
5
11

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15, subpart C of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15, subpart C of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
FCC-ID : 2AAQO-R4001
IC-ID : 11232A-PRESREMOT
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement
This equipment complies with IC RSS-210 radiation exposure limit set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 0.5cm
between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you
ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one-year warranty. StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or
replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not
warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.