State Water Heaters 305 Exterior User manual

ON-DEMAND
Choose from 16 different interior
and exterior models designed
specifically for Residential or
Commercial applications.
DURABILITY ON-DEMAND.
INTRODUCING A COMPLETE LINE OF ON-DEMAND
GAS-FIRED WATER HEATERS.
STATE ON-DEMAND GAS
WATER HEATERS.
Product Features:
Style
• Durable powder coated finish
• Smooth, pleasant lines and rounded corners
• Matching pipe cover available for finished appearance
Technology
• Interior and exterior installation options
• Continuous hot water on demand (up to 9.8 GPM)
• Whole house water heating solution
• Direct electronic ignition – no pilot light
• On-board diagnostics and safety monitoring
Durability
• Durable enough for 12-year limited warranty
on heat exchanger, 5-year warranty on all parts
• Tough enough to deliver endless hot water
• Durable enough to be installed outdoors,
saving valuable indoor square footage
• ASME models available
Tankless Energy Efficiency
• Up to 84% thermal efficiency providing significant
energy cost savings
305 and 505
Exterior
705 Interior
705 Exterior
305 and 505
Interior
200162 SRGSS02007.indd 1 8/1/08 4:41:44 PM

INTERIOR DIMENSIONS
* This is the minimum dimension from the wall. The wall bracket is adjustable to allow an additional 1.57 inches (40 mm).
305 and 505 Interior Models 705 Interior Model
200162 SRGSS02007.indd 2 8/1/08 4:41:50 PM

ON-DEMAND
EXTERIOR DIMENSIONS
305 and 505 Exterior Models 705 Exterior Model
200162 SRGSS02007.indd 2 8/1/08 4:41:50 PM

For more information on State On-Demand Water Heaters, contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com SRGSS02007
SPECIFICATIONS
* Minimum flow may vary slightly depending on the temperature setting and the inlet water temperature.
** For commercial and hydronic applications requiring higher temperatures
Specifications are subject to change without prior notice.
The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value listed is for the purpose of input adjustment.
July 2008R
200162 SRGSS02007.indd 1 8/1/08 4:41:44 PM