Stealth Products TFB User manual

Backs &
Support
TFB
Simple Solutions Removable Hardware
Owner’s Manual - Maintenance Guide
True Forming Back - Simple Solutions FlipLock Hardware

1
Table of Contents
Customer Satisfaction ................................................................................ i
General...................................................................................................................... i
Important Information..........................................................................ii-iii
Warranty.................................................................................................................. ii
Supplier Reference .............................................................................................. ii
Warning Labels .................................................................................................... iii
Limited Liability.................................................................................................... iii
Testing..................................................................................................................... iii
Design and Function .................................................................................. 1
Intended Use .........................................................................................................1
Parts Breakdown...................................................................................................1
Installation Instructions .........................................................................2-7
Preparations...........................................................................................................2
Installation Plan ....................................................................................................2
Required Tools ......................................................................................................2
Mounting the Hardware to the Back Shell.................................................3
Mounting the Hardware to the Back Posts................................................4
Mounting the J & L Hardware ........................................................................5
Operating Instructions ...........................................................................6-8
Adjustments, Depth ............................................................................................6
Adjustments, Width ............................................................................................7
Adjustments, Angle.............................................................................................8
Removable Hardware Operation (2- and 4-point)..................................9
First Time Use ........................................................................................... 10
Dealer Assistance.............................................................................................. 10
User Testing......................................................................................................... 10
Conditions of Use ............................................................................................. 10
Maintenance ............................................................................................. 11
Cleaning................................................................................................................ 11
Disinfection ......................................................................................................... 11
Maintenance ....................................................................................................... 11

i
Customer Satisfaction
Stealth Products is committed to 100% customer satisfaction. Your complete
satisfaction is important to us. Please contact us with feedback or suggestions to
help us improve the quality and usability of our products.
You may reach us at:
General
Read and understand all instructions prior to the use of this product. Failure to
adhere to instructions and warnings in this document may result in property
damage, injury, or death. Product misuse or failure to follow instructions will void
the warranty.
Immediately discontinue use if any function is compromised, if parts are missing
or loose, or if any component shows signs of excessive wear. Consult with your
supplier for repair, adjustment, or replacement.
All persons responsible for tting, adjustment, and daily use of the devices
discussed in these instructions must be familiar with and understand all
instructions and warnings, and maintain our products according to our instructions
on care and maintenance. The installation instructions will guide you through this
products' options and possibilities.
Instructions are written with the expressed intent of use with standard
congurations.
They also contain important safety and maintenance information,
as well as describe possible problems that can arise during use. For further
assistance, or more advanced applications, please contact your supplier or
Stealth Products at [phone] or toll free at [phone].
Always keep the operating instructions in a safe place so they may be referenced
as necessary.
All information, pictures, illustrations, and specications are based on the product
information that was available at the time of printing. Pictures and illustrations
shown in these instructions are representative examples and are not intended to
be exact descriptions of the various parts of the product.
Stealth Products, LLC
104 John Kelly Drive
Burnet, TX 78611
Phone: [phone] Toll Free: [phone]
Fax: [phone] Toll Free: [phone]
[email protected]
www.stealthproducts.com
MDSS GmbH
Schigraben 41
30175 Hannover, Germany

ii
Important Information
These products are designed to be tted, applied, and installed exclusively by
a healthcare professional trained for these purposes. The tting, application,
and installation by a non-qualied individual could result in serious injury.
CAUTION
Warranty
Our products are designed, manufactured, and produced to the highest of
standards. If any defect in material and workmanship is found, Stealth Products
will repair or replace the product at our discretion. Any implied warranty, including
the implied warranties of merchantability and tness for a particular purpose, shall
not extend beyond the duration of this warranty. Stealth Products does not
warrant damage due to, but not limited to: misuse, abuse, or misapplication
of product, and/or modication of product without written approval from
Stealth Products, LLC. Any alteration or lack of serial number, where applicable,
will automatically void all warranty.
Stealth Products, LLC is liable for replacement parts only. Stealth Products, LLC
is not liable for any incurred labor costs.
Stealth Products warrants against failure due to defective materials or
workmanship:
Covers: 2 years
Hardware: 5 years
Electronics: 3 years
In the event of a product failure covered by our warranty, please follow the
procedures outlined below:
Call Stealth Products at [phone] or toll free at [phone].
Request a Return Authorization (RA) form from the Returns Department and follow
the documentation instructions.
You can download additional copies of this manual by accessing the Stealth
website (https://stlpro.site/stealth-docs) and searching "P136D689" in the search
bar at the top of the page.
Supplier Reference
Supplier:
Telephone:
Address:
Purchase Date:
Model:

iii
Important Information
Warning Labels
Warnings are included for the safety of the user, client, operator, and property.
Please read and understand what the signal words DANGER,WARNING,
CAUTION,NOTICE, and SAFETY mean, and how they could aect the user, those
around the user, and property.
Limited Liability
Stealth Products, LLC accepts no liability for personal injury or damage to
property that may arise from the failure of the user or other persons to follow the
recommendations, warnings, and instructions in this manual.
Stealth Products does not hold responsibility for nal integration of nal
assembly of product to end user. Stealth Products is not liable for user death or
injury.
Testing
Initial setup and driving should be done in an open area free of obstacles until the
user is fully capable of driving safely.
CAUTION
Identies a potential situation which, if not avoided,
may result in minor to moderate injury
and property damage.
WARNING Identies a potential situation which, if not avoided,
may result in severe injury,death, and property damage.
DANGER Identies an imminent situation which, if not avoided,
may result in severe injury,death, and property damage.
NOTICE Identies important information not related to injury,
but possible property damage.
SAFETY
Indicates steps or instructions for safe practices,
reminders of safe procedures, or important
safety equipment that may be necessary.

1
Design and Function
Intended Use
The Simple Solutions Removable hardware is intended to provide a versatile
mounting solution for end users who require a removable mounting hardware for
the True Forming Back (TFB) family. The hardware features isolated depth and
angle adjustments that provide trouble-free adjustability.
Parts Breakdown
tooltip
Item ID Part Number Description Qty.
A1 BKT13 (45°)
BKT14 (90°) Bracket for Flip Lock Hardware 1
A2 M6 x 1 x 12MM BHS M6 x 1.0 x 12MM Button Head Screw 2
A3 M6 SSW 0.5 OD x .266 ID x .250 Thick Washer,
Black Oxide 2
A4 TFB200-88 Single Hole T-Nut Metric 2
B1 BKT01 Removable, Angle Adjustable, Seat Back Bracket 1
B2 PIN02 Latch Pin 1
B3 NUT02 Threaded Pointer Slot Nut 1
B4 SPC01 1" Slot Point Spacer 1
B5 M5x0.8x16MM SHS M5x0.8x16MM Socket Head Screw 2
B6 M6x1x22MM BHS M6x1.0x22MM Button Head Screw 2
B7 M6 SSW 0.5 OD x .266 ID x .250 Thick Washer,
Black Oxide 2
C1 RCV02 (with latch) Receiver (with latch and pin stop) 1
C2 CLP01 Inside Clamp 1
C3 M5x0.8x16MM SHS M5x0.8x16MM Socket Head Screws 1
C4 BR5002 Outside Clamp 1
C5 M6x1x25MM BHS M6x1x25MM Button Head Screws 1
C6 PIN01 Cam Pin 1
C1
B1
B4
B3
C4 C6
C5
C3
B2
C2
B5 B6
B6
A3
A1
A4
A2
C. Back-Post Clamp
B. Mounting Pin
A. Mounting Bracket
45° bracket
shown.
NOTICE
Altering the hardware in any way
and/or improper installation
will void the warranty.
tooltip

Item ID Part Number Description Qty.
D1 SSS200-36 1" Hold Down Drop Stop Weldment 1
D2 SSS200-152 1 IN 7 Hole J-Hook 1
D3 SSS200-153 Double Slot Adjustable L-Bracket 1
D4 67582247 5/16 4 10 Internal Tooth H-Lock Washer 1
D5 TFB200-88 Single Hole T-Nut Metric 2
D6 M6x1x14.3MM RBW M6x1mm Thread, 14.3mm Barrel Height
Round Base - Base Weld Nut. 1
D7 M6x1x35MM BHS M6 x 1 x 35MM Button Head Screw 1
D8 M6x1x16MM BHS M6 x 1 x 16MM Button Head Screw 4
D9 M6 SSW 0.5 OD x .266 ID x .250 Thick Washer, Black Oxide 2
D10 M6x1.0 NLN M6 - 1.0 Nylon Lock Nuts, Low Prole, 18-8 S/S, BI 2
D11 BR2020 2IN x 1IN OD x .875IN ID Reducer 2
2
Design and Function
Installation Plan
Set up an installation plan before beginning the installation. This plan should take
into account:
• Where the Simple Solutions Removable hardware will be placed and
how it will be adjusted.
• Sucient clearance for other hardware, such as wings or laterals that may
be required.
Required Tools
Use the proper tools to install and adjust the Simple Solutions Removable
hardware to the desired position for the user.
The tools needed to install the Simple Solutions Removable hardware are as
follows:
Preparations
Only a qualied service technician may install the Simple Solutions Removable
hardware.
Use the proper tools to install and adjust the Simple Solutions Removable
WARNING
An incorrect installation of the Simple Solutions Removable
hardware and its accessories can cause damage to the
hardware and/or injury to the user.
CAUTION
The use of improper tools may cause damage to the device.
Any connection must always be secured with all delivered
screws. Use only the screws included in the package.
A. J & L Hardware
D2
D7
D10
D11
D7
D4
D1
D6
D5
D8
D3
D9
D8
Hardware Description
4mm Hex Key Flat and Button Head Screws
10mm Combo
Wrench
4-point installation,
Nylon Lock Nuts

3
Installation Instructions
Mounting the Hardware to the Back Shell
Step One: Place M6x1x12mm
Button Head Screws (A2) and M6
Washers (A3) in the top and bottom
slot of the Mounting Bracket* (A1).
* 45° bracket shown. 90° bracket may be used, if
needed, and will follow the same instructions.
Step Two: Insert the
screws and the
mounting bracket into
one of the mounting
slots on the back shell.
Step Three: Thread each screw into
a Single Hole T-Nut (A4). Make sure
the grooves in the T-nut line up with
the edges of the slot. Tighten the
screw to secure the mounting
bracket in place.
Step Four: The J & L mounting brackets follow the same procedure to install on
the lower portion of the back shell in 4-point installations. Align the mounting
brackets with the slots in the back shell and lightly snug the M6x1x16mm
Button Head Screws to hold the mounting brackets in position.
SAFETY Periodically check all mounting hardware,
ensuring each fastener is properly tightened.
tooltip
tooltip
tooltip

tooltip
tooltip
tooltip
tooltip
3/4" 7/8" 1"
4
Installation Instructions
Mounting the Hardware to the Back Posts
Step One: Loosen the two M6 x
1.0 x 25mm Socket Head Screws
(C5) securing the Outside Clamp
(C4) to the Inside Clamp (C2)
Step Two: Place the
clamp on the cane at the
desired position.
Step Three: Tighten
the two M6 x 1 x
25mm Socket Head
Screws (C5) to secure
the mount on the
cane.
Note: The clamp is
adjustable to match
dierent back post
diameters:
WARNING Maximum Weight Capacity:
250 lbs. (113.40 kg)
tooltip
tooltip

tooltip
tooltip
tooltip
5
Installation Instructions
A
D
E
B
Mounting the J & L Hardware
Step One: For 1" canes, the Hold Down Drop
Stop Weldment (B) can be placed directly on the
cane. For 7/8" canes , place the BR2020 Reducer
(A) on the cane and then the Weldment (B).
Position it in the proper vertical position on the
cane and secure with the M6 x 1 x 35mm Button
Head Screw (C), 5/16" 4 10 Internal Tooth H-Lock
Washer (D) and M6 x 1 x 14.3mm Round Base -
Weld Nut (E).
Step Two: To adjust the mounting hardware
for depth, remove the two M6 x 1 x 16mm
Button Head Screws (F) and M6 x 1 Nylon
Lock Nuts (G) holding the 1 IN 7 Hole J-Hook
(H) from the Double Slot Adjustable L-Bracket
(J). Adjust the bracket to the desired holes
and reinstall the screws to secure it in place.
4-point installations require the J & L hardware in the lower position. Depending
on the back shell installed, you will use a 45° or 90° bracket* to mount this
hardware to the back shell. 7/8" canes will require the BR2020 spacer (A) to t the
J&L hardware. (J&L hardware not included with 2-point installation.)
* 90° bracket shown
FH
G
J
C
Step Three: The 1 IN 7 Hole J-Hook (H) can
be separated from the Hold Down Drop Stop
Weldment (A) by pulling up gently and can be
returned to the same position by placing it in
the slot between the back of the weldment
and the cane. If the xed or removable
hardware is adjusted for height, the weldment
can be loosened and matched to the rest of
the 4-point hardware using #1 - #5 as shown
in the image to the right.
1
5
3
2
4

6
Thoracic Support
Adjustments
Depth Adjustment
The Simple Solutions Removable hardware can be adjusted to increase or
decrease seat depth.
tooltip
tooltip
Step One: Loosen the
M6x1x22mm Button Head
Screws (B6) attaching the
Mounting Pin (B) to the
Mounting Bracket (A).
Step Two: Slide the
Mounting Bracket (A)
forward or backward into
the desired position.
Step Three:
Tighten the two
M6x1x22mm
Button Head
Screws (B6) to
secure the back
shell in the new
position.

tooltip
7
Operating Instructions
Width Adjustment
Step One: Loosen the
M6x1x12mm Button
Head Screws (A2) on
both left and right
mounting brackets (A1).
Step Two: Slide the back
shell to left or right until the
desired height is reached.
Step Three:
Secure the
mounting
brackets by
tightening the
M6x1x12mm
Button Head
Screws.

tooltip
8
Operating Instructions
Angle Adjustment
Step One:
Loosen the two
M6x1x22mm
Button Head
Screws (B6) on
both left and
right mounting
brackets.
Step Two:
Tilt the back
shell up or
down to
reach the
desired
position.
Step Three:
Tighten the
M6x1x22mm
Button Head
Screws (B6)
to secure the
back at the
new angle.
Simple Solutions Removable hardware allows the back shell to pivot up or down.

tooltip
9
Operating Instructions
Removable hardware operation (2 pt. and 4 pt. Removable)
Step One: Rotate the Cam Pins
(C6) a quarter turn on each
removable hardware to unlock the
mounting hardware from the
Receiver (C1).
Step Two: Firmly
grasp the back shell
and slide the
hardware out of the
Receiver (C1).
Step Three: To replace the
back shell, slide the Latch
Pin (B2) into the Back Post
Clamps (C). Rotate the Cam
Pin (C6) back to the vertical
position to lock the back in
place
Step Four: Lift gently on the back shell to ensure the Simple Solutions
Removable hardware has engaged and is locked in. If either latch is not
fully engaged, repeat the steps above.

10
First Time Use
Dealer Assistance
During rst-time use by the client, it is advised that the dealer or service technician
assists and explains the set-up to the customer (the user and/or the attendant). If
needed, the dealer may make nal adjustments.
User Testing
It is important that the customer is fully aware of the installation, how to use it, and
what can be adjusted in order to gain as much mobility as possible. As a dealer,
proceed as follows:
              

Have the user test the position of the Simple Solutions Removable hardware.
Is the hardware in the proper position for the client?
          
        
Explain to the customer possible problems and how to address them.
Conditions of Use
The Simple Solutions Removable hardware is intended for use as installed by the
dealer, in accordance with the installation instructions in this manual.
              
       
             
          

11
Maintenance
        
            

               
Cleaning
Disinfection
          
      
Maintenance
These care and guideline instructions will keep the hardware and covers in good
condition for a longer period of time and prevent damage.
              
      
             
CAUTION
Exercise caution when removing the back to avoid
punctures, tears, or other damage to the fabric or foam.
Be careful not to catch hair, wires, or other items
when zipping and unzipping the covers.

12
Notes

13
Notes

14
Notes

Stealth Products, LLC · [email protected] · www.stealthproducts.com
[phone] | [phone] | 104 John Kelly Drive, Burnet, TX 78611
      
© 2021, Stealth Products, LLC
WarrantyInformation Home Page OnlineUser Manual