Steel Core 42813 User manual

*Actual product may vary slightly
Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product.
Observe all safety information to protect yourself and others. Failure to observe the instructions may result in property
damage and/or personal injury. Please keep instructions for future reference.
For warranty purchases, please keep your dated proof of purchase. File or attach to the manual for safe keeping.
For Customer Service, Call 1-800-348-5004
or e-mail [email protected] 42813 02/2017
300 LB. CAPACITY 30” x 16” 2-SHELF
STEEL SERVICE TOOL CART
42813

Tool Cart Safety Warnings
Assembly Instrucons
For addional informaon regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Unwrap and separate all parts on a clear work area.
1. Do not ride or climb on Cart. Keep away from children.
2. Do not exceed 300 lb. capacity, evenly distributed.
Be aware of dynamic loading!
Sudden load movement may briefly create excess load causing product failure.
3. Use only on a flat, level surface able to support Cart and load.
4. Wear ANSI-approved safety goggles during assembly.
5. Inspect before every use; do not use if parts are loose or damaged.
Aaching Posts to Boom
Figure 1
Tray
Laythe BoomTray (2) (the tray with four sets
offour holes onthe boom) onthe floor and
aach the Posts (7) to the outsidecornersof
the trayusing sixteenBolts (9), Washers(11), and Lock Nuts (8).
Bolt (9)
Bottom Tray (2)
Post (7)
Lock Nut (8)
Washer (11)
[email protected] 21-800-348-5004

Aach Top Tray (1) to the other end of the legs using
twelve Bolt (9), Washers (11) and Lock Nuts (8). (Four
holes on one end of the top tray are reserved for
aaching the Handle in the next step.)
Assemble the Pipe Plug (6) onto ends
of Handle (4) and aach Handle (4) to
end of Posts (7) using four Bolts (10),
Washers (11) and Lock Nuts (8).
Attaching Handle
Note: For ease of assembly, set the
Cart on its side and work on
two legs at a me
Figure 2
Figure 3
Attaching Top Tray
Washer (11)
Bolt (9)
Lock Nut (8)
Post (7)
Top Tray (1)
Top Tray (1)
Lock Nut (8)
Washer
(11)
Bolt
(10)
Pipe Plug
(6)
Handle (4)
[email protected] 31-800-348-5004

1. Decide on which end of the Cart to mount the pair of Rigid Wheels (5) and pair of Swivel wheels (3). For example,
mounng the Fixed Wheels on the Handle end of the Cart will make a push Cart like those in a grocery store.
2. Aach each Fixed Wheel to one end of the Boom Tray (2) using four Bolts (12), Washers (13) and Lock Nuts (14).
3. Aach each Swivel Wheel (3) to the remaining end of the Boom Tray (2) using the remaining Bolts (12),
Washers (13) and Lock Nuts (14).
Total Capacity 300Lb
3-1/2”
4” Rubber Casters (two fixed and two locking swivel)
29” L x 15” W x 33-1/4” H
Tray Depth
Wheels
Dimensions
Assembly Instrucons (Connued)
Aaching Wheels
Specificaons
Figure 4
Bolt (12)
Bottom Tray (2)
Swivel Wheel (3)
Washer (13)
Lock Nut (14)
Rigid Wheel (5)
[email protected] 41-800-348-5004

Parts List and Assembly Diagram
Part
1
2
3
4
5
6
7
1
1
2
1
2
2
4
Top Tray
Boom Tray
Swivel Wheel
Handle
Rigid Wheel
Pipe Plug �32
Post
Descripon Q’ty Part
8
9
10
11
12
13
14
32
28
4
32
16
16
16
Looknut M6
Bolt M6 x 12
Bolt M6 x 16
Washer �6
Carriage Bolt Screw M8 x 16
Washer �8
Looknut M8
Descripon Q’ty
[email protected] 51-800-348-5004

Limited Manufacturer Warranty
FOT makes every effort to ensure that this product meets high quality and durability
standards. FOT warrants to the original retail consumer a 1-year limited warranty
from the date the product was purchased at retail and each product is free from
defects in materials. Warranty does not apply to defects due directly or indirectly
to misuse, abuse, negligence or accidents, repairs or alterations, or a lack of
maintenance. FOT shall in no event be liable for death, injuries to persons or
property, or for incidental, special or consequential damages arising from the
use of our products. To receive service under warranty, the original manufacturer
part must be returned for examination by an authorized service center. Shipping
and handling charges may apply. If a defect is found, FOT will either repair or
replace the product at its discretion.
DO NOT RETURN TO STORE
For Customer Service:
Email: [email protected] or Call 1-800-348-5004
[email protected] 61-800-348-5004