Steel mate 2-Way Car Alarm System User manual

4.
5.
6.
Shock sensor triggering
In alarm arming mode, the first impact to vehicle
will trigger the system, the siren will chirp for 3
times with turn signals flash for 5 times. The
transmitter will "Bi" with vibrations, the and
icon will be flashing on the screen. If the
system is triggered again within 15 seconds,
the siren will chirp sharply and turn signals will
flash for 30 seconds, the engine will be
immobilized. The transmitter will "Bi" with
vibrations, the and icon will show
alternately,icon will be flashing on the screen.
In mute arming mode, the shock impact will
trigger the system. The siren will not chirp, other
actions are the same as that in alarm arming
mode.
Shock sensor bypass
Pressbutton and button(seorching button)
for
2 seconds, shock sensor will be by passed
and system will "Do Re Mi" without any vibrations.
This function is suitable for thunderstorm and
severe weather or other situation which is easy
to trigger vibration alarm
Ignition on, opening door/ trunk, footbrake trigger
In alarm arming mode or in mute arming mode,
if the system is triggered by ignition on, doors
opened, trunk released or footbrake pressed,
the siren will chirp for 30 seconds with the turn
Turn transmitter ON/OFF (For 2-Way transmitter)
The transmitter needs to be turned on before the first use, the default setting is OFF.
Turn transmitter ON: Press and hold button for 2 seconds.
Turn transmitter OFF: Press and hold button for 5 seconds.
Note:Transmitter will be shut down when the battery is used up. If the transmitter cannot be turned on,
please charge it according to "Transmitter charging".
Battery level indication
When transmitter's battery level is low, the transmitter will have warning sound after any button is pressed.
When the battery indicator is empty, the transmitter needs to be charged immediately.
Note: The transmitting range will be affected when the battery is low.
Battery is full
Voltage: 3.75V
Battery is enough
Voltage: 3.75V~3.60V
Battery is in a half
Voltage: 3.60V~3.40V
Battery is low
Voltage: 3.40V~3.20V
Battery is empty
Voltage: <3.20V
Functions
1.
2.
3.
Alarm arming & locking the doors (Active arming)
Press button once on transmitter, the doors
will be locked with chirp and turn signals flash
once. The LED light flashes to indicate that
system is armed in alarm arming mode.
The transmitter will "Bi" once with icon flashes
once, and & icon will show on the screen.
Mute arming & locking the doors (Active arming)
Press button once on transmitter, the doors
will be locked with turn signals flash once and
the siren will not chirp. The LED light flashes
to indicate that system is armed in mute arming
mode.
The transmitter will "Bi" once with icon flashes
once, and & icon will show on the screen.
Disarming & unlock the doors
In alarm arming mode, press button once, the
doors will be unlocked, the siren will "Bi" twice
with turn signals flashing, then the system will
be disarmed. The transmitter will "Bi" twice with
the & icon flash twice, and the icon will
show on the screen.
In mute arming mode, press button once, the
doors will be unlocked, the siren will not chirp,
turn signals will flash twice. Then the system
will be disarmed. The transmitter will "Bi" twice
with the & icon flash twice, and the icon
will show on the screen.
Specifications
System:
Operating voltage:
Operating current:
Operating frequency:
Horn sound level:
2-Way transmitter:
Modulation mode:
Operating frequency:
Operating voltage:
Static current:
1-Way transmitter:
Modulation mode:
Operating frequency:
Operating voltage:
Static current:
12 3V
(FSK modem)< 20 mA
433.92 0.15MHz
105 ~ 125 dB
FSK
433.92 0.15MHz
3.2~4.2V
35 uA
FSK
433.92 0.15MHz
2.0~3.3V
< 0.5 uA
Brief look of 2-Way transmitters
: Arm button
: Disarm button
: Mute
:Trunk release
/SET: SET
Buttons
Charging:
Operating voltage:
Output voltage:
Static current:
12V 3V
5V 0.5V
5mA
Interface
Signal bar
Arm
Mute
Battery indicator
Vehicle battery
voltage
Turn signals flashing
Low vehicle battery
Impact on vehicle
Trunk-released
ACC triggered
Door opened
Arming with
door locked
Disarming with
door unlocked
Arming in
alarm mode
Arming in
mute mode
Battery
indicator
Turn signal
flashing
Vehicle battery
voltage
Signal bar
Trunk-
released
Door opened
Impact on
vehicle
Vehicle battery
ACC
triggered
lower than 10.5v
Disclaimer
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
This system is for vehicles with 12V DC only.
System should be installed by a professional
auto technician.
The installation position of ECU should be kept
away from water and dust.
All components should be fixed tightly and the
wires must be long enough to avoid
disconnection from heavy vibration during
driving.
This system will help to reduce the possibility
of losing the vehicle by discouraging. Please
take out the valuables when leaving the vehicle.
When the transmitter operating distance is
shorter or its indicator light turns dark, please
recharge the transmitter battery ASAP.
It is highly recommended to read this manual
before using this system.
Perform a functional test after installation.
The operation distance may affected by
constructions, topography or weather.
Please do not open or change the PCB without
authorization.
Key features
Technology
Ultra long operation distance with 2-way LCD
transmitter
Rechargeable lithium battery for transmitter
Comfort closure
Vehicle battery voltage display on transmitter
Match with central locking system
Valet mode
Emergency override
Anti-hijack
2-Way Car Alarm System
Manual
7.
8.
signals flashing continuously, the engine will be
immobilized.
If the system is triggered by ignition on, the
transmitter will "Bi" with vibrations, the
and icon will be flashing on the screen.
If the system is triggered by footbrake pressed
or doors opened, the transmitter will "Bi" with
vibrations, the and icon will be flashing on
the screen.
If the system is triggered by trunk released, the
transmitter will "Bi" with vibrations, the
and will be flashing on the screen.
Alarm pause
In armed status, opening door/ trunk/ hood,
ignition on will trigger the system and alarm
chirping continuously, press button or button
to stop the alarm and system will return to its
former arming status.
Remote trunk release
Press and hold the button or hold +
buttons together for 2 seconds to release
trunk. In arming mode, after trunk release, the
shock sensor will be bypassed, if detected
ignition on, opening door or footbrake is pressed,
the system will alarm with turn signals flashing.
If the trunk is not closed completely after 2
minutes, the transmitter will "Bi" with vibrations
for 3 times, and icon will be flashing on
screen.
For the car with dome light function, the system
will re-arm automatically after the dome light
turned OFF.
13.Dome light delay
The function is specially designed for the vehicle
with dome light function. The system will enter
the arming mode automatically once the dome
light turned OFF.
14.Passive arming
When the engine is OFF and system did not
arm in 1 minute, system will enter the mute
arming mode automatically but the doors will not
be locked, the and icon will be flash on the
screen. Hold /SET, the transmitter will "Bi"
twice to indicate that the system exit the passive
arming mode. Hold/SET again, the transmitter
will "Bi" once to indicate that the system enter
the passive arming mode.
15.Central locking automation
The doors will be locked by pressing the footbrake
after the engine is running 15 seconds. Press
/ button, the doors will be locked/unlocked
during driving.
If door or trunk did not close properly, the siren
will "Bi" for 3 times while turn signals will flash
3 times as a reminder.
The doors will be unlocked automatically after
engine OFF.
If the trunk is not close completely, the transmitter
will "Bi" after 3 minutes, with 3 times vibrations
and icon will show on the screen.
9.Car locating
Press button for 2 seconds or press /SET
button, the siren will chirp for 10 seconds with
turn signals flashing for 10 seconds to locate the
car. Yet, the siren will not chirp in the mute
warning mode.
10.Anti-hijack
When ignition is on, press and hold button for
2 seconds, the siren will chirp with turn signals
flashing until the button be pressed.
11.Door closing reminder
When the system is armed in alarm mode and
the door or trunk did not close properly in 20
seconds, the siren will "Bi" 3 times with turning
signals flashing. The transmitter will "Bi" with
vibrations, the icon or the will flash on the
screen.
The doors should be closed properly, or 70
seconds later, the siren will chirp sharply for 4
minutes.
12.Re-arming automatically
Pressbutton once, the system will be disarmed
with the doors unlocked. If the door is not opened
in 25 seconds, the system will re-arm
automatically.
16.Warning for roadside stop
When stopping by the roadside with the door
opened, the turn signals will flash for 15 seconds
to warn the approaching vehicles.
17.Warning for triggered system
If the system has been triggered in armed status,
the siren will alarm when the system is disarmed
and the door is opened:
1)
2)
3)
The siren will chirp twice when shock sensor
is triggered.
The siren will chirp 4 times when door/ trunk/
hood is opened, or ACC is ON, or footbrake
is pressed.
In mute arming mode, the LED indicator will
flash continuously to indicate that the vehicle
has been triggered.
18.Staus preserving
The system will return to the former status when
the power is on again, even the power is cut off.
19.Valet mode
In valet mode, the system will not arm even with
the transmitter, but convenience functions (door
lock/ unlock and trunk release) will work normally.
Press footbrake and turn ACC ON, then hold
button or press the /SET button once, system
will chirp 3 times with turn signal flash 3 times
and enter valet mode.

In valet mode, hold button or press the /SET
button once to exit the valet mode.
20.Transmitter programming
Press the learning button in the ECU, the LED
indicator will turn on and the system will enter
the code learning mode:
1)
2)
Press any button on the first transmitter
once, the LED indicator will flash twice, turn
ON to indicate the first transmitter is
programmed successfully.
Press any button on the second transmitter
once, the LED indicator will flash for 3 times
to indicate the second transmitter is
programmed successfully.
Note:Only 2 transmitters can function with
the same system.
21.Comfort window closure (optional)
The window closure function is only for the vehicle
with convenient system (turn key to lock position
and hold until the roof/ windows are closed),
please jump the J1 to "ON" position to active
this function. The windows and roofs will be
closed when arming the system. (Default setting
is in "OFF" position)
22.Emergency override
If the transimtter lost or failed to operate, the
system can be disarmed by the emergency
overide.
Siren installation Shock sensor installation
Trunk trigger (-) Engine killer circuit
Fuel pump cut (-) Trunk release circuit
Notes: Default setting is Door trigger(-)
ACC circuit Footbrake (+)
Door trigger (+) / (-)
A
B
Installation of antennaJump switch setting
(Fig.2 or Fig.3).
(Fig.4).
(Fig.5).
Central locking system installation
15
ACC circuit
Door trigger (+/-)
3P
Wiring diagram
Shock sensor
LED indicator
Learning button
Ultrasonic sensor
Includes
Transmitters X2
Siren Ribbon
LED indicator Cables
Shock sensor
The above graphics are for reference only
Relay Antenna
ECU
Manual
Tips for ECU installation
1. The ECU should be fixed at a concealed place under dashboard.
2. The ECU should be installed away from water.
3. Connect wires according to the wiring diagram properly.
4. Binding all wires after installation.
Step footbrake and turn ACC ON to OFF for
10 times, and stay in "ON" position, the LED
indicator
will turn on to indicate the system will be disarmed.
Press
23. Signal intensity indication
The system can transmit the signal to the
transmitter every 2 minutes. The signal can be
monitored
through the transmitter:
: No signal, out of reception range
: Weak signal
~ : Good signal
~ : Strong signal
24. LED indication
LED
Flash twice then pause for 2 seconds
Flash once then pause for 2 seconds
Turn on for 2 seconds then pause for 2 seconds
Turn ON
Indication
The system is armed in alarm/ mute arming mode
The system is arming mode with shock sensor bypass
Door/ trunk, footbrake, ACC triggered
After emergency override
PCI0982R/A